⌀53mm

also referenced under: OOMAOPRECR75D1, CRM 71.9

Technical Specifications:

Product Type: Soldering Iron
Power Supply: Mains operation
Tip Width: 3.1 mm
Heating Power: 30 W
Tip Temperature after 3 minutes: 380 °C
Suitable for copper sections up to: 2.5 mm²
Weight without power cord: 80 g
Identification and Classification Numbers:

EAN / GTIN: 4003008047004
Manufacturer's Reference: 0330KD
Description:
This industrial soldering iron is designed for exceptional longevity, equipped with Ersadur long-life tips that last 30 times longer than standard copper soldering tips. It heats up in 3 minutes, features a 1.5 m rubber power cable (ref. 30 uses PVC), and comes with a detachable iron stand (not included with ref. 30). The Ersa soldering iron also includes a clip-on iron stand for convenient and safe use.

230V / 1550W

also referenced under: OOMAOWELPR01, CRM 2, 142.717

KM DILEM-10, relais TRP 614

also referenced under: OOMAOVENCR50N, CRM 31

for bulb: E14, 40W, 240V, 550C

also referenced under: OOMAOVENCR50L, CRM 32

BE 220/240/3001

also referenced under: OOMAOVENCR50E, CRM 35

Stainless Steel

Stainless Steel

Features and applications:
- GN 227.7 stamped steel handwheels have high mechanical strength and coating for increased corrosion resistance.
- They are also shock and impact resistant.
- The tapered square hole facilitates installation and proper positioning on a pin.
- Molded shape prevents injury from sharp edges when handling.
- Handwheels are stamped “SHUT” and “OPEN” for safe and correct valve handling.

PVC

ENP 360°, spare part

also referenced under: OOMAVAPUCR10R, CRM 67

Powerful and compact Li-Ion batteries.
No memory effect.
No loss of power.
Low self-discharge.
Fast battery charging.
Also very efficient at temperatures below 0 ° C.
Bosch CoolPack - Optimal protection of cells against overheating thanks to the special heat sink housing under the battery.

D 60 mm, 0-250 bars

Light-weight and powerful 115 mm one-hand angle grinder in handy compact design, drive head can be rotated in 90° steps, quick adjustment of protective cover, M14 grinding spindle thread.
800 W motor, slim easy-grip casing, restart inhibit.
Supplied with protective hood, clamping set and additional handle.
Power consumption: 800 W
Speed range: 12,000 min-1
maximum disc ⌀: 115 mm
maximum cutting depth: 28 mm
Weight: 1.9 kg
maximum vibration to EN: 4.2 m/s2
Restart block: yes

1 green, 1 red, 1 emergency stop

ENP 220, spare part

also referenced under: OOMAOVENCR50FT, CRM 28

also referenced under: OOMAOVENCR50T, CRM 39

Technical characteristics:
Type: SP11
Max. working pressure: 24 bar
Maximum operating temperature: 50°C
Air flow: 25 l/min
Flow at 5 bar: 25 l/min

Execution:
Spray gun with straight tube and plastic container, matt red, capacity 1 l.

120 minutes

also referenced under: OOMAOVENCR50I, CRM 29

2.2 kW

also referenced under: OOMAOVENCR50FR, CRM 37

Very compact Li-ion fast charger with practical cable reel, for 14.4 to 18 V batteries. The 4.0 Ah battery is ready for use after 25 minutes

Tough industrial soldering irons with Ersadur long−life soldering tips (30 times the working life of conventional copper soldering tips). Warm−up time 3 min. (for size 300, approx. 5 min.). Power cable 1.5 m rubber cable (PVC for size 30). With support stand (not size 30).
Powerful soldering iron for copper cables up to 6 mm2 cross section.
Soldering tip width: 5.3 mm
Heating power: 150 W
Soldering tip temperature after 3 minutes: 450 °C
suitable for copper cross sections up to: 6 mm2

also referenced under: OOMAOWELIE15, CRM 10, 0155JD

with gauge and support type T
Adjustable pressure 0-8.5 bar
Max. Flow 1'134 l / min
Plastic bowl, manual drain

This pump is designed according to the requirements of the air conditioning systems and enables a professional evacuation of the cold air conditioning circuit.

Due to its outstanding technical characteristics and the robust design, the vacuum pump can also be used for the air-conditioning in your car.

Because of the repeated daily service work and the related cold starts, it is important for the air-conditioning technology that the vacuum pumps are reliable.

• For the mobile use for evacuating refrigeration and air conditioning circuits
• For universal use with refrigerant recovery machines and installation aids
• For evacuating the air conditioning systems from cars and commercial vehicles
• As replacement for air conditioning service units
• Ergonomic handle for the easy and safe transportation of the vacuum pump
• For minimizing the noise the vacuum pump is equipped with rubber feet
• Switch on and off directly at the vacuum pump
• oil-free and therefore maintenance free / no oil mist

Connections: 12.91 mm / 1/4 inch
Dimensions: 415x365x285mm
85x65x105mm
Debit (l/h): 8100 LITERS
Noise level db(A): ≤ 55
Cable length: 1.9 m
Vacuum: 600mm Hg

25 liters

also referenced under: OOMAOPRECR75E, CRM 71.6

Delivered with: 5 chisels, 1 spare spring
Air requirement average, approx: 240 l/min
Working pressure: 6.3 bar
Chuck: 10 mm
Stroke count: 2200 min¯¹
Impact strength: 9.5 J

10 meters of joint with 1x silicone cartridge

also referenced under: OOMAOVENCR50G1, CRM 46.1

2200 W / 230 mm angle grinder with start-up current limitation and restart inhibit.
Supplied with:
Supplied with protective hood, additional handle, clamping set.
maximum disc ⌀: 230 mm
maximum speed: 6,600 min-1
Restart block: yes
maximum vibration to EN: 8.7 m/s2
Weight: 5.2 kg
Power consumption: 2,200 W
maximum cutting depth: 68 mm
Manufacturer's designation: WS22-230E

for 2 years maintenance

also referenced under: OOMAVAPUCR11, CRM 56.1

Heavy, durable industrial design with maintenance-free motor
Housing made of extruded aluminum
Long service life and smooth running due to balanced rotor with quality ball bearings
Spark protection on each grinding wheel reduces flying sparks
Sight glasses made of shatterproof material
Vibration damping rubber feet
Coarse and fine grinding wheel (K36/K80) as standard

for LEISTER TRIAC

Dimensions (LxWxH): 320 x 270 x 825 mm
Weight (net): approx. 14.5 kg

also referenced under: OOMAOVENCR50FC, CRM 36

Powerful all-rounder with high suction power, compact construction, hose storage and accessory holder on the device. Automatic shutdown once the tank is full.
The flat pleated filter allows the water / dust suction to be switched immediately without removing the filter.
The Tact automatic filter cleaning system enables uninterrupted work, reduced maintenance costs and a long filter life.
The central control button allows you to switch from one suction program to the other.
Robust 30 liter tank with bumpers and metal steering casters.
Wet / dry vacuum cleaner with electric price and automatic start for electric tools.
Adhesion resistant PES cartridge filter.
Manufacturer no .: NT22APTE
Power supply: Mains operation
Power consumption: 1'300 W
Container volume: 22 l
Nominal dimensions of fittings: 35 mm
Length: 380mm
Width: 370 mm
Height: 480 mm
Suction hose length: 1.9 m
Cable length: 6 m
Number of Engines: 1
Air volume flow: 71 l / s
Vacuum: 255 mbar
Sound level: 72 dB (A)
Automatic switch-on system: yes
Filter cleaning: ApClean semi-automatic filter cleaning
Dust class - vacuum cleaner: L
Weight: 6.1 kg
Filter systems: Cartridge filter

Dimensions WxDxH: 850 x 500 x 1140mm
Weight: 83,000kg
Max. stitch length: 5mm
Sewing speed: max. 300 stitches
Needle system: 332 L LG, 332 LG
Footprint: 1000 x 750mm
max. presser foot stroke: 12mm

includes: ball valve, flexible hose connector, flexible hose (25m), flexible hose collar, pipe cross coupling, pipe plug, pipe double connector, teflon sealing tape

optional oven equipment