1m x 10m

also referenced under: OOMAOVENTEFLON, CRM 55

Bosch cordless drill / driver

Compact, powerful cordless drill with forward/reverse operation.
Long service life thanks to brushless EC motor (not 070243).
With Electronic Motor Protection (EMP) and Electronic Cell Protection (ECP).
LED light to illuminate the working area and battery charge display.
Multi-stage torque setting for precise screw driving.
Electronic speed control for precise drilling and screw driving.
Softgrip.

Outstanding available and comfortable handling due to compact design. Motor brake for precise work.
suitable battery - supplier / battery type / voltage: Bosch 18 V
Manufacturer's designation: GSR 18V-21
Motor design: 4-pole DC motor
Battery capacity: 2 A·h
Battery voltage: 18 V
maximum torque soft: 21 N·m
maximum torque hard: 55 N·m
Speed range 1st speed: 0 min-1 - 480 min-1
Speed range 2nd speed: 0 min-1 - 1,800 min-1
Quick-clamping chuck range: 1.5 mm - 13 mm
maximum twist drill size ⌀ in steel: 13 mm
maximum twist drill size ⌀ in wood: 35 mm
Weight: 1.7 kg
maximum vibration to EN: <2.5 m/s2

Impact drill with high-performance motor with high torque for very heavy duty applications (drilling, working with drills, masonry hole saws and hole saws) as well as screwdriving and smoothing.

New safety handle with innovative fastening and softgrip for secure holding of the machine.
Sturdy metal gearbox for long working life.
Mechanical overload clutch Anti-rotation for high working security even for the toughest applications
Single-sleeve quick-change chuck with auto-lock for quick tool-changing using only one hand.
Rotatable brush plate for equal torque in clockwise and anti-clockwise directions.
Spindle neck ⌀ 43 mm (European standard) − can be used in drill stands.
2-speed gearbox.

Enhanced user protection by KickBack Control.

Supplied with 13 mm quick-change chuck, additional handle, depth stop 210 mm, L-BOXX 136.
Manufacturer's designation: GSB 24-2
Power consumption: 1,100 W
maximum torque: 40 N·m
Drill chuck adapter: 1/2 inch − 20 UNF
maximum speed 1st speed: 900 min-1
maximum speed 2nd speed: 3,000 min-1
maximum twist drill size ⌀ in steel: 16 mm
maximum twist drill size ⌀ in wood: 40 mm
maximum twist drill size ⌀ in concrete: 22 mm
maximum hammer rate: 15,300 min-1
Quick-clamping chuck range: 1.5 mm - 13 mm
Weight: 2.9 kg
maximum vibration to EN: 14.6 m/s2

also referenced under: OOMAOVENTHERDIG, CRM 53

Sturdy general-purpose jigsaws with metal gearbox casings and overload protection.
With FIXTEC quick-release clamping system allows blades to be changed in seconds without any tools, and selectable orbital stroke for optimum cutting power and dust extraction combined with reduced saw blade wear.
Supplied with:
Supplied with chip break guard.
Supplied with 2 × saw blades, extraction adapter, sole plate, mains cable 4 m, carrying case.
Packaging: Carrying case
Manufacturer's designation: STEP1200XE
Power consumption: 730 W
Rate of strokes: 500 min-1 - 3,000 min-1
maximum sawn thickness steel: 10 mm
maximum sawn thickness wood: 135 mm
Mitre angle adjustment: Yes
Orbital stroke: 4-way
Weight: 2.4 kg
maximum vibration to EN: 10.5 m/s2
tool change without tools: yes, FIXTEC system

Market-leading oscillating tools in three different performance classes (SuperCut, MultiMaster, MultiTalent) in a new version with Starlock tool arbor (improved torque transmission of up to 35 % greater rate of progression of the work).
Virtually unlimited application possibilities (sawing, grinding, scraping, cutting, rasping) due to the oscillating mode of movement (low generation of dust).
Stepless electronic speed control for optimum working.
Very high quality and stability thanks to the metal gearbox and use of ball bearings and needle bearings throughout.
Optimum handling due to ergonomic design with soft-grip inlays and low weight.
Supplied with:
1 toolbox set “QuickStart” containing:1 abrasive plate, 3 each abrasive discs (80, 120, 180 grit), 1 E-Cut universal saw blade (44 mm).
Packaging: Carrying case
Manufacturer's designation: MM 300 Plus Start
Power consumption: 250 W
Toolholder: StarlockPlus, Starlock
Speed of oscillation: 11,000 min-1 - 20,000 min-1
Amplitude (oscillation movement): 2 × 1.6 degrees
Weight: 1.4 kg
Cable length: 5 m

750W/220V, L=84cm

also referenced under: OOMAOVENCR50H, CRM 38

750W/220V, L=98cm

also referenced under: OOMAOVENCR50HG, CRM 45

FUNCTION: Programmer, Controller
DIMENSIONS: 48 x 48 mm
DISPLAY: 1 display with 4 digit
POWER SUPPLY: 24 Vac/Vdc, 100… 240 Vac
INPUTS: 0/1… 5 V, 0/2… 10 V, 0/4… 20 mA, Pt100, PTC-NTC, Thermocouple
OUTPUTS: Relay and/or SSR control
DIGITAL INPUTS: 1, 2
INDEPENDENT TIMER: Yes
NUMBER OF PROGRAMS / SEGMENTS: 1 program with 8 segments
INTERFACE: TTL Modbus
SPECIAL FUNCTIONS: Digital retransmission, Hours/Days worked, Power on delay, Soft start, Transmitter power supply, User calibration, Wattmeter
CONTROL: ON/OFF and PID single or double action
EXTRACTABILITY: By the front
CERTIFICATIONS: CE, UL

Specially parameterized for CR5000G

also referenced under: OOMAOVENCR50RG, CRM 46, K48

Body width: 490 mm
Body depth: 190 mm
Body height: 409 mm
Material of the housing: Plastic
Colour of housing: blue
Connection outlet: 1/4 in
maximum operating pressure: 16 bar
Hose external ⌀: 12 mm
Hose internal ⌀: 8 mm
Material of hose: Polyurethane
Colour of hose: blue
SCS automatic roll-up drum: yes

- Oil-free piston compressor, therefore no oil change necessary and no oil in condensate
- Fully automatic on-turn-off mode
- Electric motor equipped with motor protection switch
- One pressure gauge for displaying the container and working pressure

also referenced under: MOBILBOY 221/24 OF E

also referenced as: OOMAOPRECR75P, CRM 74

The TRIAC ST from Leister is a handy heat gun, primarily used as a profiling tool for welding and processing plastic membranes. Additionally, it is used for professional welding, shrinking and molding various thermoplastics. The two-sided air filters of the TRIAC ST can be easily removed and cleaned. This ensures an optimal air supply and maximum performance. As a successor of the TRIAC S, the ST combines a new, highly robust engine with current technology and modern design in a handy heat gun.

Compared to the design of other heat guns, the proven bar-style heat gun enables welding above the head, on the floor and in narrow areas. The ergonomic, two-component handle and its optimized center of gravity provide an ideal grip, even for longer periods of use and under difficult conditions. When in use, the actively cooled, protective tube ensures continuous safety by protecting against burns. The carbon brake also protects the heat gun from overloading. The extensive range of accessories with over 80 attachment nozzles practically make this heat gun a universal device. The TRIAC ST is already the seventh generation of Leister’s revolutionary line of TRIAC hot air tools. Decades of experience packaged in a modern design, manufactured with Swiss quality: The TRIAC ST is a robust and reliable tool.

VOLTAGE: 100 - 230 V
FREQUENCY: 60 Hz; 50/60 Hz
POWER: 1500 - 1600 W
TEMPERATURE: 40 - 700 °C
AIR FLOW (20°C): 240 l/min
TEMPERATURE SETTING STEPLESS: Yes
STATIC PRESSURE: 3000 Pa
NOISE EMISSION LEVEL: 67 dB (A)
OUTDOOR USE: Yes
DISPLAY: No
ECO MODE: No
E-DRIVE: No
NOZZLE CONNECTION Ø: 31.5 mm / 1.25 in; M14
LENGTH: 338.0 mm
DEVICE DIAMETER: 90 mm
HANDLE DIAMETER: 56 mm
WEIGHT: 0.99 kg
PLUG: KR, 2 poles, 16A; CN, 2 poles, 10A; EU, 2 poles, 16A; JP, 3 poles, 20A; CEE yellow, 3 poles, 16A; JP, 2 poles, 15A; AU, 3 poles, 10A; UK, 3 poles, 13A; US, 2 poles, 15A, polarized; CH T11, 2 poles, 10A
POWER CABLE LENGTH: 3.0 m
CONFORMITY MARK: CE
SAFETY MARK: KCC; S+; UL
PROTECTION CLASS: II

also referenced under: OOMAOWELAIRT, CRM 1, 141.311

230V/500W
High-end quality made in Switzerland

- 100% Swiss made quality
- 60 years of expertise in making hot-air tools – brought together in the new SOLANO AT
- The sturdy, professional hot-air tool that weighs less than 1 kg/2.18 lbs
- Functional design: two-component handle grip and optimum center of gravity ensure ergonomic working
- Quick clean air filters
- Automatic carbon stop (collector protection) and heating element protection
Voltage V ~: 230
Power W: 2300
Temperature ° C: 500–650
Air quantity (20 ° C) l / min: 240
Dimensions (L × ∅) mm: 270 x 270 x 75 (45)
Weight: 750gr

All technical data is based on an operating pressure of 6.3 bar and the indiqué inside pipe shown.
A range of powerful and very quiet revolver-type drills with a maximum drilling power of 13 mm in steel. Air exhaust through the handle prevents swirling of chips. With quick-release chuck.
Discharge power: 350W
Maximum rotation speed: 0 min-1 - 2400 min-1
Quick clamping chuck clamping range: 1.5mm - 10mm
Maximum quantity of absorbed air: 600 l / min
Threaded connection: BSP
Pneumatic connection: 1/4 inch
Recommended hose size (⌀ int.): 10 mm
Weight: 1 kg
Sound level: 82 dB (A)
Maximum vibrations according to EN: <2 m / s2
Length: 211 mm

- Ideal for sawing steel, aluminum, copper, PVC and Teflon
- Stepless, electronic speed control from 30 - 80 m / min
- Particularly quiet - up to 60% quieter than comparable band saws
- Low vibration and wear thanks to special gearbox with two large gears made of hardened steel
- Guaranteed cutting accuracy of max. 0.3 mm course over 100 mm cutting length
- Each machine individually tested for precision in Italy
- Low-speed DC drive motor with carbon brushes for up to 10 times longer life
- Electronic temperature and ampere recording monitoring against overload
- Cast strip wheels with ground running surface without rubber pads, therefore suitable for dry and wet cutting
- Massive saw bar made of die-cast aluminum (readjustable from MBS 125) and with sturdy transport lock
- Two movable, adjustable saw band guides with chip scraper made of metal
- Particularly stable base plate with non-slip feet
- Very service-friendly, as components are easily accessible

also referenced under: MBS 105, CRM 116

400W, 2 pieces

also referenced under: OOMAOPRECR75F, CRM 71.3

also referred as: OOMAOPRECR75T, CRM 76

Length approx: 1070 mm
Width/depth approx: 340 mm
Height approx: 950 mm
Weight approx: 72 kg
Supply voltage: 230 V
Mains frequency: 50 Hz
Extraction duct nominal width outside: 2 x 100 mm
Emissions sound pressure level at workstation Lp (idling without extraction unit): 87 dB(A)
Max. sanding width: 75 mm
Sanding belt length: 2000 mm
Sanding belt width: 75 mm
Circumferential belt speed(s): 29 m/s
Contact wheel diameter: 200 mm

incl. mounting bar for workbench assembly

for inserting eyelets, hooks, push buttons, etc. also for punching with thread adaptor (Daude) for upper puncher, radius=150mm

incl. mounting bar for workbench assembly

Cone diameters: ⌀48.3 / ⌀88.9

also referenced under: OOMAVAPUCR103, CRM 59

Cone diameters: ⌀84 / ⌀129

also referenced under: OOMAVAPUCR102, CRM 58, CR 8910

Cone diameters: ⌀104 / ⌀154

also referenced under: OOMAVAPUCR101, CRM 57, CR 8900

- Closed-loop controlled temperature
- Open loop controlled air volume
- Intelligent «e-Drive» operating unit
- Ergonomic handling
- Modern design/ Swiss made
Power W: 1600
Voltage V~: 230
Temperature °C: 45 - 620
Air volume (20°C) l/min: 160 - 240
Size (L x ∅) mm: 335 × 90
Handle ∅ mm: 56
Weight kg: 1

Robust and stable universal grinding machines with abrasive belt and grinding wheel for a wide range of materials
Heavy, durable industrial design with maintenance-free motor
Housing made of extruded aluminum
Large, heavy mounting flanges and thus high disc concentricity
Sanding attachment with graphite coating; prevents friction and heat
Stop allows quick and easy sanding of workpieces
Tape adjustment without tools - only adjustable with a handle screw
Universal corundum grinding wheel and sanding belt in the standard scope of delivery

Chip collection volume: 110 l
Extraction duct inlet outside nominal width: 203 mm
Extraction duct outlet outside nominal width: 1 x 100, 1 x 120 mm
Length approx.: 1000 mm
Width/depth approx.: 500 mm
Height approx.: 2100 mm
Weight approx.: 39 kg
Idle Speed: 2950 min¯¹
Motor input: 1.5 kW
Supply voltage: 230 V
Mains frequency: 50 Hz
Filter surface area: 1.92 m²
Max. sound pressure level: 85.7 dB(A)
Rated volume flow: 1900 m³/h
Max. negative pressure: 1700 Pa

Welding mirror with Teflon coating and automatic temperature control. Suitable for indoor and outdoor use.

Diameter: 280mm
Weight: 3.0kg
Power consumption: 900 Watts / 230 Volts 50 Hz
Design: straight
Includes device stand.

also referenced under: OOMAOWELPR28, CRM 7, BARY A-2

• 100% Swiss made quality
• Leister's smallest manual device
• Continuous electronic temperature control
• Continuous electronic adjustment of the air flow
• Quiet
• Integrated flexible foot
Voltage V ~: 230
Power W: 460
Temperature ° C: 40-600
Air flow (20 ° C) l / min: 40/110
Dimensions (L × ∅) mm: 235 x 70
Weight: 400gr

also referenced under: OOMAOWELHJ01, CRM 1.0, 100.688

The most efficient oscillating machines, available in three power categories (SuperCut, MultiMaster, MultiTalent); new model with Starlock tool carrier (optimized power transmission for up to 35% faster working speed).
Almost unlimited applications (sawing, grinding, scraping, cutting, grating) thanks to the oscillating movement (low dust emission).
Electronic progressive adjustment of the rotation speed for optimal use.
Maximum quality and stability thanks to the metal gear case and the combined use of ball and needle bearings.
Optimal maneuverability thanks to the ergonomic design and the Softgrip coating, reduced weight.
Powerful MultiTool for rapid progress (for interior design and renovation) with more than 30 accessories for sawing in wood and metal, sanding, cutting tiles, etc.
Delivery:
Set of 30 accessories, 1 × suction device, 1 × plastic tool case.
Set of 30 accessories: 1 × E-Cut Long-Life saw blade - (10 mm), 2 × E-Cut Long-Life saw blades (35 mm), 2 × E-Cut Long-Life saw blades ( 65 mm), 1 × E-Cut Carbide Pro saw blade (32 mm), 1 × carbide saw blade (⌀ 75), 1 × carbide rasp (triangular), 1 × spatula, 1 × perforated backing pad , 1 × perforated sanding sheet each (grit 60, 80, 120, 180).
With 1 × ALG 80 rapid charger, 2 × Li-Ion batteries (18 V / 3 Ah).
1 “Akku” case with charger, 1 backing pad, 3 sanding sheets each (grain 60, 80, 120, 180), 1 fixed spatula, 1 HSS segment saw blade, 1 Long-Life E- saw blade Cut (65 mm), 1 E-Cut universal saw blade (44 mm).
Manufacturer no .: AFMM 18 QSL
Number of batteries included: 2
Battery type: Lithium-ion
Battery capacity: 3 A h
Battery voltage: 18V
Tool holders: StarlockPlus, Starlock
Number of oscillations: 11'000 min-¹ - 18'500 min-¹
Oscillation angle: 3.4 °
Angle approach of the support plate: 80 mm
Weight: 1.8 kg

Heating: 1x 2400W, 1x fan motor, heating active light
Thermostat: infinitely up to 250°C
Timer: infinitely 0 - 120 minutes, On/Off active light
Housing: Stainless steel, inside and outside, door with large viewing window, opens down to the front, double side bouncy supports
Accessories: 1 grill, 1 tray, standard
Power supply: 230V / 50Hz / 2,5 kW
Dimensions: outside: W 527 x D 450 x H 316 mm / inside : W 404 x D 308 x H 254 mm
Weight: 20 kgs

Ø360mm

also referenced under: OOMAMARP3000M, CRM 88

Including; 10m aspirator flexible hose, 1x reduction, 20x clamp, 3x T-connector, 5x straight connector, 9x wall clamp, 3x butterfly valve, 1x silicone sealant cartridge, 1x silicone gun, 1x rubber tape

220V / 50Hz / 0,2 kW
Teflon coated as protection, range of regulation: 100-180°C
with stand and 1,40m cable

Oscillating plaster saw. Power : 500 W.
From 6.500 to 24.000 oscillations/minute.
Weight : 1.528 kg.
Supplied with 2 blades : Ø 50 and Ø 65 mm for natural plaster.

Length approx: 280 mm
Width/depth approx: 125 mm
Height approx: 140 mm
Weight approx: 2.3 kg
Supply voltage: 230 V
Mains frequency: 50/60 Hz
Electrode: 4.2 kVA
Electrode: 5 – 150 A
TIG DC: 5 – 150 A

also referenced under: OOMAOWELMA01, CRM 11, PRO-STICK 161

- Industrial engine
- Easy to use safety switch according to IP 54
- Digital drilling depth and speed indicator integrated in the housing
- Separate emergency stop impact switch
- Precision Spindle bore
- Safety electronics in 24 V DC
- Guaranteed concentricity measured less than 0.02 mm in the drill quill
- Drill spindle with precision ball bearings
- High quality keyless chuck
- Depth stop
- Precision machined, stable drill table with diagonal T-slots and circumferential cooling water channel
- V-belt cover with safety switch
- One piece cast aluminum die-cast quill lever with softgrip handles
- Large, height-adjustable protective screen with safety switch
- Heavy version of the entire machine

also referenced under:: OPTIdrill D 23Pro (230 V), EMACDRILC150, CRM 158

3/8" - DN10, kit of 7 pieces

also referenced under: OOMAOPRECR75B, CRM 76.1

230V, Volume 6, m³/h, Vacuum 60mbar

- Designed for demanding continuous use when oil-free and clean compressed air is required
- Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
- Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
- Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
- The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon
High-quality maximum equipment
- Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous separation of dirt, oil and condensate
- One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
- Two comfort safety quick couplings
- High-quality CONDOR pressure switch
- One pressure gauge each for tank and working pressure
- Simple condensate drain via ball valve
Compressed air lines and reservoirs with long service life
- Flexible armored hose line with heat protection prevents vibration fractures
- Inside and outside hot-dip galvanized, corrosion-protected compressed air reservoir with 15-year warranty against rusting through
Comfort safety quick couplings
- One-hand safety couplings according to DIN EN 983 used by AIRCRAFT as the first manufacturer in series production
- Two separate locking systems for maximum working safety
- No whipping of the hose line during uncoupling
Convenient transport
- Transport back-friendly in upright position and without lifting
- Additional transport handle directly on the container
- Puncture-proof PU foam wheels
- Stable steering chassis with parking brake
Immediately ready for use
- Fully automatic on-off operation
- With all safety devices
- Completely ready for connection

also referenced under: AIRPROFI 220/50 OF PRO, CRM 178.3

FEATURES
- Complete drive shaft with bayonet connection
- Abrasive ring diameter 100x90mm length 283mm
- Integrated vacuum cleaner and external fabric filter

MACHINE DIMENSIONS
- Width 540mm - Depth 410mm - Height 440mm - Weight 34 Kg

POWER SOURCE
- Single phase 230V - 1ph - 50Hz

D 325/L 600mm

Versatile application possibilities
Two-stage gear ratio
Tool holder MK 2
Safety electronics in 24 Volt version
EMC filter class C1
Drilling and milling head can be tilted by ± 90 ° on both sides, thus drilling and milling in angular position as required
Height-adjustable and large-dimensioned protective screen with microswitch
Accurate delivery through positionable scale rings on all handwheels
Simple and clear operating unit with on-off switch, potentiometer and emergency stop impact switch
Infinitely variable speed from 100 to 3,000 min-1
High concentricity measured by tapered roller bearing better than 0.015 mm in quill
Stable column with dovetail guide via wedge bars adjustable on all 3 axes
Game in the feed spindle adjustable and adjustable
Column laterally displaceable for extended application
Massive cross table with T-slots and coolant channel as well as adjustable end stops
Integrated longitudinal scale in the cross table
All travel paths can be read on scales
Clean milling pattern by individually clamped guides
Inexpensive and stable in value

also referenced under: OPTImill BF 16Vario