also referenced as: OOMAOPRECR75C, CRM 73

Blister-forming Set for BK and AK prostetic socket production. The set includes a Blister-forming tray with two plates (D=320mm and D=265mm) and a vacuum-table with fitting silicone-rings and assembly material.

- Ideal for ambitious modellers and do-it-yourselfers
- Flywheels made of die-cast aluminum with special coating
- Aluminium cast iron worktable swiveling up to 45°
- Equipped with precise 3-rolls saw band guide above and below the table
- Aluminum longitudinal stop with quick clamping precisely adjustable with the aid of a magnifying glass and millimeter scale
- Two belt speeds adjustable

also referenced under: HBS 361-2, EMACBSAWBS

Comprising : 1 blower, 120W, 1 electrical relay, housing, 2m electrical cable, pipe D 75mm/2m, 1 pipe collar D 75mm, 1 blowing nozzle, 1 nozzle holding bar L 880mm, 1 sheet metal collector, 1 flange D 100mm for aspirator connection

also referenced under: OOMADUSTAS01A, CRM 84.5

- Designed for demanding continuous use when oil-free and clean compressed air is required
- Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
- Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
- Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
- The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon
High-quality maximum equipment
- Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous dirt, oil and condensate separation
- One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
- Two comfort safety quick couplings
- High-quality CONDOR pressure switch
- One pressure gauge each for container and working pressure
- Simple condensate drain via ball valve
Compressed air lines and reservoirs with long service life
- Flexible armored hose line with heat protection prevents vibration fractures
- Inside and outside hot-dip galvanized, corrosion-protected compressed air tank with 15-year guarantee against rusting through
Comfort safety quick couplings
- One-hand safety couplings according to DIN EN 983 used as standard by AIRCRAFT as first manufacturer
- Two separate locking systems for maximum working safety
- No whipping of the hose line during uncoupling
Convenient transport
- Transport back-friendly in upright position and without lifting
- Additional transport handle directly on the container
- Puncture-proof PU foam wheels
- Stable steering chassis with parking brake
TÜV-free
- Type-tested by an approved monitoring body
- Recurring container inspections also possible by a competent person
Immediately ready for use
- Fully automatic on-off operation
- With all safety devices
- Completely ready for connection

also referenced under: AIRPROFI 440/100 OF PRO, EMACAIRCO380, CRM 178

- for heating thermoplastics (low temperature PE)
- good insulation of the device ensures rapid heating of the water
- with a cover
- dimensions 600 x 400 x 200 mm, 15 liters
- 230V

Vacuum-press for manufacturing of insoles and foot-orthotics. Without vacuum pump

Type: Vacuum-press , Bench-top version for use with external vacuum-supply
Frame Dim. (LxW): 520 x 350mm, gas-shock supported, frame tension adjustable (equipped with Soft-bladder)
Vacuum-Pump: none
Power supply: 230V / 50Hz
W 360 x D 650 x H 250 mm
Weight 21 kgs

Column diameter: 80 mm
Length approx: 715 mm
Width/depth approx: 360 mm
Height approx: 1640 mm
Weight approx: 85 kg
Drilling performance steel (S235JR): 25 mm
Continuous drilling performance steel (S235JR): 20 mm
Workspace length: 320 mm
Workspace width: 290 mm
T-groove type: diagonal
T-groove size: 14 mm
Rotation: 360 °
Angle: ± 45 °
Max. distance spindle - drilling table: 720 mm
Supply voltage: 400 V
Mains frequency: 50 Hz
Max. distance spindle - machine base: 1230 mm
Work area length: 385 mm
Work area width: 260 mm
Spindle motor drive output: 0.75 kW
Speed range: 200 - 2440 min¯¹
Number of gears: 12 Stages
Speed control: manually
Quill stroke: 85 mm
Spindle chuck: MT 3
Reach: 210 mm

Swivel range of ± 45 °
Easy-to-read angle scale enables precise work
Seconds adjustment of the miter
Protected vise spindle
Massive machine base on both sides with holes for the mounting of the material stand MSR
Long handle allows sawing without great effort with integrated push-button (on / off)
Automatic switching on of the coolant pump when sawing
Functional protection device, closed construction, movable
Fast opening mechanism for optimum safety when cutting
Centrally exciting vise, 4-fold guided with individually adjustable clamping jaws. Cutting always takes place in optimal position to the workpiece
Massive machine base
Protected vise spindle
Machine base sizes:
- CS 275 - 460 x 515 x 775 mm and
- CS 315 - 546 x 620 x 801 mm
The saw is delivered without circular saw blade (saw blade division freely selectable)

also referenced under: OPTIsaw CS 275, CRM 115

950W
560 tr/min

Compact unit to provide vacuum for two Lamination work-places (4 separate inlets) +
1 direct-connection for vacuum supply, with integr. vacuum-pump + Vacuum-tank / 6m³/h / -0,8bar
Type: Laminating device TLV6-II
Vacuum-Pump: 6 m3/h / oil- and maintenance-free / end-vacuum 200mbar
Inlet / connections: 4x 8mm, separately switchable, 1x DIN coupling for vacuum supply etc.
Filter: dust-filter, per inlet
Vacuum automatic: standard
Power supply: 230V / 50Hz
Dimensions: W 435 x D 390 x H 240 mm
Weight: 22 kgs

Designed for Orthopedics workshops
Manual height adjustment, milling shaft horizontally and vertically
adjustable, continuous speed control, M.16 milling shaft thread, adapter from M.16

Dimension : Out Side W.50—D.50—H.40 cm
Power Supply 220 Volt 50 Hz
Power cord With CEE plug 3 × 16 A and CEE socket 3× 16 A
Sound intensity level 80 dB(A)
Electrical connection 220 V 50 Hz 1500 Watt
Motor RPM Variable rotation speed, min. 0 to max. 3000 RPM
Connecting cable 3x2,5 mm2 3 mt
Router shaft length and Type 500 mm 30 to 35 mm ( Conic 220 mm )
Suction head hose 100 mm plastic ,flexible
Scope of delivery Exhaust arm with suction hood (Ø 100 mm +hose )
Color Rall 7035 & 7045
Weight Net 42 Kg

slide system for loading the mold inside the press before each injection

also referenced as: OOMAOPRECR75A, CRM72

Vacuum-press for pairwise manufacturing of insoles and foot-orthotics. With vaccum pump

Type: Vacuum-press , Bench-top version for use with external vacuum-supply
Frame Dim. (LxW): 520 x 350mm, gas-shock supported, frame tension adjustable
(equipped with Soft-bladder)
Vacuum-Pump: Rotary vane, oil- and maintenance-free, 6 m/h / 200mbar, vacuum-automatic controlled
Power supply: 230V / 50Hz
W 360 x D 650 x H 250 mm W 360 x D 650 x H 250 mm
Weight: 30 kgs

- vacuum unit for the manufacturing of thin-walled cast resin laminates and thermoplastic deep-drawing works

Features:
- 2 separate, electronically infinitely adjustable vacuum units with pressure gauge
- 4 connections for resin lamination
- 2 connections for deep drawing
- 2 connections for external units
- hose connection, inside Ø 6 mm
- 1,5 m power cord with grounded plug

Technical Data:
- dimensions W x D x H: 425 x 385 x 220 mm
- suction capacity: 25 l/min, approx. 80 % vacuum
- Power requirements: 220 – 230 V / 50 Hz / 1 Ph / 0.14 kW
- Special voltages upon request.
- Weight: 18 kg

- for cast resin and deep-drawing processes, with two separate vacuum systems, electronically controlled with digital display, vacuum pressure continuously adjustable, with 1.5 m power cord
- 6 connections for lamination 2 connections for deep-drawing 2 connections for external units, e.g. additional tank
- 25 L/min
- 200 mbar
- 230V, 50Hz, 0.14kW
- 425x385x220mm
- 20kg

with centring jigs for conical and cylindrical cups
OOMAALIGGJ

Vacuum-press for manufacturing of insoles and foot-orthotics. With vacuum pump

Type: Vacuum-press , Bench-top version for use with external vacuum-supply
Frame Dim. (LxW): 520 x 350mm, gas-shock supported, frame tension adjustable (equipped with Soft-bladder)
Vacuum-Pump: Rotary vane, oil- and maintenance-free, 6 m/h / 200mbar, vacuum-automatic controlled
Power supply: 230V / 50Hz
W 360 x D 650 x H 250 mm
Weight 30 kgs

Length approx: 705 mm
Width/depth approx: 655 mm
Height approx: 900 mm
Weight approx: 71 kg
Drive motor output 1.1 kW
Supply voltage: 230 V
Mains frequency: 50 Hz
Max. extraction performance: 950 m³/h
Extraction arm type: Hose design
Filtering process: 3-stage
Area approx: 13 m²
Sound pressure level: 72 dB(A)

Complete thermoforming device with filtration and regulation of vacuum supply.
Two working positions :
- horizontal tube for thermoforming by lay-up (ex : for spinal orthoses)
- vertical adaptator for thermoforming by stamping (ex : for sockets)

- for warming of thermoplastics (low temperature PE = Streifytherm,
Turbocast)
- the good insulation of the unit guarantees a fast warming of the water
Features
- with lid
- low energy consumption
- exact temperature adjustment
- capacity: 40 liters
Technical Data
- outer dimensions L x W x H: 770 x 430 x 340 mm
- inner dimensions L x W x H: 700 x 360 x 190 mm
- temperature range/digital display: 30 - 95° C
- accuracy: +/-1° C
- accesory: grate and drain
- power requirements: 230 V / 50 Hz / 0,9 kW
- material: stainless steel
- weight: 19,5 kg net

includes 2 thermoregulatore and 2 probes

Dimensions WxDxH: 600 x 600 x 990 mm
Material: Steel
Vacuum connection: 13mm
Weight: 45 kg
Colour: Light grey (RAL 7035)
Scope of delivery: 704B1=140 vice, 704G11 clamping fixture "Orthofix" for exhaust tubes, 755X221 vacuum pipe with exchangeable vacuum forming plate (diameter 360 mm), ball valve, 4m hose, mounting materials for bolting to the floor
Optional accessories: 704Y30 Floor plate - Steel, galvanised, 800 x 800 x 10 mm
755X181 Foot pedal for vacuum control

Vacuum-press for pairwise manufacturing of insoles and foot-orthotics. With vaccum pump

Type: Vacuum-press , Bench-top version
Frame Dim. (LxW): 520 x 350mm, gas-shock supported, frame tension adjustable
(equipped with Soft-bladder)
Vacuum-Pump: Rotary vane, oil- and maintenance-free, 6 m/h / 200mbar, vacuum-automatic controlled
Power supply: 230V / 50Hz
W 360 x D 650 x H 250 mm W 360 x D 650 x H 250 mm
Weight: 30 kgs

For processing all types of leather, rubber and other materials. With long arm and frame pressing device. Cutting width up to 190 mm, splitting and cutting width max. 30 mm.

Uniformly heats thermoplastic sheet materials commonly used to form prosthetic and orthotic devices. Infinitely adjustable temperature. Heating surfaces are coated with air permeable Teflon sheeting.Two gas cylinders assist in lifting the cover and hold it open at a 45° angle.

Dimension : Out Side: W.125—D.110—H.90 cm
Dimension : Top cover Open: W.125—D.110—H.180 cm
Dimension : Heater Area: W.100—D.85 cm
Power Supply: 220 Volt 50 Hz
Power cord: With CEE plug 5 × 16 A and CEE socket 5 × 16
Heating Pipe: Type 12 pcs / 550 x 12 : 6.600 Watt
Temparature Control: Digital Control 250 °C Max. J Type
Process Completed: Sound and red warning lamp
Upper and Lower Surface: Teflon 0.25 mm
Color: Ral 7035 & 7045
Weight Net: 152 Kg
Boxed : Dimension and Total Weight: W.140 -D.120- H.120 cm 225 kg

400V, 1.2kW, volume 25m³ / h, 25L tank

CHARACTERISTICS
- Motor shaft 1400rpm
- 35mm abrasive accessories
- Horsehair brush and waxing pad
- Cutter shaft 6000rpm with cutter rule
- Pumice motor
- Internal extractor fan
- Dust recovery system with extractable drawers
- Internal fabric filter with back panels for double filtration

MACHINE DIMENSIONS
- Width 900mm - Depth 600mm - Height 1500mm - Weight 140 Kg

POWER SUPPLY
- Single-phase 230V - 1ph - 50Hz

380V, 1.27 - 1.7kW

also referenced under: OOMAMARPOL3500, CRM 89

Swinging honing machine with funnel-type milling machine
All models we offer-ensure the highest efficiency, versatility and safety
All the models can be fitted with suction device
Weight: 100 Kg
Headphones mandatory (according to DIN EN 352)

380V, 1.2 - 1.7kW / 1400 - 2800 rpm

also referenced under: OOMAMARP3000, CRM 85

380V, 2200W, 3000rpm
with dust collector

MACHINE FEATURES
- Horizontal motor with bayonet connection
- T22 pine cone and pad supplied
- Foot switch operation
- Arrangement for connection to a centralized vacuum system
- 60 mm diameter on the side
- Suction channel adjacent to the pad

MACHINE DIMENSIONS
- Width 700mm - Depth 400mm - Height 400mm - Weight 50 Kg

POWER SUPPLY
- Single phase 230V - 1ph - 50Hz with inverter

- Heavy design with high dead weight for maximum running smoothness
- Particularly quiet and pretorsionally stiff machine housing
- Cast flywheels with rubber coating and cleaning brush
- 3-roller precision saw band guide as standard at top and bottom
- Large cast iron saw table, swivels from 0° to +15° with ground and polished surface
- Large cast-iron parallel fence with round rod guide, easilyguide, easily movable
- Saw blade tension indicator
- Precise cutting height adjustment overover toothed rack with millimetre scale
- Self-braking motor

also referenced under: HBS 640 AS

for inserting the knee tube inside the concave cylindre

also referenced under: OOMAALIGMIM

380V / 2.2 - 3kW / 1400 - 2800 rpm

also referenced under: OOMAMARPLB25, CRM 84.2

400V, 1.2kW, volume 40m³ / h, 25L tank

Space requirements WxD: 1400 x 800 mm
Power requirements: 400 V / 50 Hz / 1,27 kW / 1,7 kW
Noise level: 75 dB(A)
Power cord length: 2 m
Weight: 134,000 kg
Calour: lichtgrau (RAL 7035)
Scope of delivery: with 1 Sanding belt (2500 x 50 mm), 1 round grinding plate, 2 m power cord with CEE plug
Sanding belt speed: 15/30 m/sec
Dimension upper part W x D x H: 1000 x 500 x 1622 mm
Description: left side: aluminium plane wheel 350 mm Ø, continuous, inclinable support table, folding down at the side for full use of the grinding surface, extraction connection piece 100 mm Ø to connect to a chip extraction system with a minimum air velocity of 20 m/s right side: belt tensioning arm with closed protection hood, extraction connection piece 100 mm Ø, belt length 2500 mm, belt width 50 mm with round plate, contact wheel, sanding belt

230V/1100W/7.5A, 570-890 m3/h, dimensions 1200/600/H1'380mm

also referenced under: OOMADUSTAS01, CRM 107

fixedly mounted on a trapezoidal steel plate,
for mounting on a workbench or the like,
multi-stage height adjustment of the milling axis,
powerful motor with 2 turning speeds,
electromagnetic motor brake,
removable axle guard
400V / 50Hz / 2,7-3,4 kW

with connection kit 121 W 312 and 2 enveloping tubes (adult 121 W 001.L + child medium 121 W 001.M), 220 Volts/750W, 0.85 to -0.1 mbar

also referenced under: OOMAVAPUCR10, CRM 56, CR 1000

Effective delivery volume approx: 1000 l/min
Maximum Pressure: 10 bar
Pressure vessel capacity: 500 l
Air outlet: ¾ "
Length approx: 1980 mm
Width/depth approx: 700 mm
Height approx: 1630 mm
Weight approx: 307 kg
Absorbed power electric motor: 7.5 kW
Supply voltage: 400 V
Mains frequency: 50 Hz
Motor type: Electric
Sound pressure level Lp: 68 dB(A)

Sander with two telescopic booms on rubber contact rollers.
Power supply: 400 Volt
Belt: 50 x 2500 mm
Weight: 140 kg
Headphones mandatory (according to DIN EN 352)

400W / 1.27kW

also referenced under: OOMAMARPDB01, CRM 91

for elbow child L = 17cm

also referenced under: OOMAMOULEC17, CRM 80

for elbow adult L = 23 cm

also referenced under: OOMAMOULEC23, CRM 81

for children's elbow L = 27cm

also referenced under: OOMAMOULEC27, CRM 82

Dimensions WxDxH: 1390 x 980 x 850 mm
Power requirements: 220V / 50 Hz / 9,9 kW
Temperature range: 50 °C - 200 °C
Working surface W x D: 1250 x 1050 x 860mm

Dimensions WxDxH: 1390 x 980 x 850 mm
Power requirements: 380V / 50 Hz / 9,9 kW
Temperature range: 50 °C - 200 °C
Working surface W x D: 1250 x 1050 x 860mm

Granulator for polypropylene, 400V/15kW, 280 à 330kg/h
Blades made of high-resistant steel ensuring longest usage times
Hopper, cutting chamber, and discharging base are separable for convenient cleaning, parts replacement, and maintenance
Double sound-insulation device in the cutting chamber reducing noise to the minimum
Motor over-load protection and interlocking device well protecting machine itself and ensuring operator safety
Blades can be sharpened for several times after getting blunt to extend blades’ lifespan and save cost

also referenced under: OOMAGRAN300, CRM 78

Dimensions WxDxH: 850 x 500 x 1140mm
Weight: 83,000kg
Max. stitch length: 5mm
Sewing speed: max. 300 stitches
Needle system: 332 L LG, 332 LG
Footprint: 1000 x 750mm
max. presser foot stroke: 12mm

DURKOPP ADLER class 525i zigzag machines, lockstitch, have been designed with interchangeable control cams. They are specially made for the production of decorative stitches (outlines) on made-up clothes and ladies' underwear in textile materials. These machines can be used for sewing light and medium textiles and leathers.
230V / 50/60 Hz
Delivered with:
- Table 105,110 or 120cm south 55 or 60cm
- Fixed frame
- Electronic motor
- Oil
- Accessories