• Raw material
  • Chemical components
  • PVA Bags & Rolls
  • Buckles, Straps, Rivets
  • Transfer paper
Microballon, 1000g
To lighten resins and save material
Register to see prices 0.0 USD
PET-G sheet, 400x400mm, transparent
400x400mm
Glycolized Polyethylene Terephthalate (PET-G)
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
D-ring
100pc
Register to see prices 0.0 USD
Rigid foam, ASTI-OP 300
Light rigid foam
- expansion factor: approx. 5.0
- density: approx. 300kg/m³
- limited mechanical strength
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Hardener for foam, ASTI-B
Hardener for pedilen foam
Register to see prices 0.0 USD
EVA (PE) foam, 3mm, terra
3x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
EVA (PE) foam, 3mm, olive
3x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
EVA (PE) foam, 3mm, beige
3x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
EVA (PE) foam, 3mm, blue
3x1000x1000mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
Separating Lubricant PTFE
When sprayed, the Teflon ™ / PTFE microparticles ensure clean dry lubrication without oil-covered hands, adhesive protection and effective reduction of static, dynamic and rolling friction.
Dry lubrication and hygienic solid.
No adhesion of dirt and dust on the treated surface.
No formation of annoying lubricant residues.
Oil and fat free.
Hygienic, clean and ecological.
Durable and resistant lubrication and sliding effect.
Resin-free, non-hardening.
High material compatibility (all metal and plastic parts!).
Silicone and acid free.
Execution: Aerosol can
Content: 0.4 l
Color: transparent
Boiling point: 78 ° C
Flash point: -104 ° C
Auto-ignition temperature: 400 ° C
Water solubility: insoluble
Signaling of hazardous substances: SGH02 Flammable
Class of dangerous goods: 2.1
UN number: UN1950
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Plastazote non-perforated, skin coloured, 5mm
1000x1000x5mm, 15-18 Shore A
Register to see prices 0.0 USD
Micro cork (Flexokork), plate, 1000x500x4mm
Material:
- cork-compact sheets

Application:
- for insoles and embeddings
- for height adjustments, shoe last modifications and volume adjustments of prosthetic sockets

Characteristics:
- light-weight
- bendable
- well grindable
- bonds well with contact glues
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Rigid foam, ASTI-OP 100
Light rigid foam
- expansion factor: approx. 5.0
- density: approx. 100kg/m³
- limited mechanical strength
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Plastazote perforated 3mm, flesh colour, 1m x 1m
1000x1000x3mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A
Register to see prices 0.0 USD
EVA (PE) foam, 2mm, beige
2x1100x1100mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
Plastazote perforated 4mm, flesh colour, 1m x 1m
1000x1000x4mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Plastazote non-perforated, skin coloured, 6mm
1000x1000x6mm, 15-18 Shore A
Register to see prices 0.0 USD
Thread sealant stick Loctite 561
These sealants replace hemp, sealing tapes, and pastes, they are resistant to gases, liquids, air, water, oils, hydrocarbons and many chemical products. Complete surface contact ensures a 100% seal. Unscrewing, or correction of position during assembly can be performed using conventional tools at any time before the sealant hardens. No sealant residues to block filters and valves.
The stick with pasty sealant is economical in consumption, no drips after use.
Application:
Improved bonding of suckers.
Note:
Before applying sealant, clean the threads with general-purpose cleaner
Labelling of hazardous substances: GHS07 Caution
Content of stick: 19 g
Colour of sealant: orange
minimum break-away torque: 5.8 N·m
Temperature range: -55 °C - 150 °C
for thread size M to: M80
for imperial thread size: 3 inch
Strength for disassembly: low
fluorescent:no
Register to see prices 0.0 USD
Cast resin Dacron felt
3x2000x930mm
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Plastazote perforated 5mm, flesh colour, 1m x 1m
1000x1000x5mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A
Register to see prices 0.0 USD
Dri-Lex, sport insole cover, 2.3x1000x1370mm
climate-conditioning,
air-permeable, attractive
design, yard goods
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Micro cork (Flexokork), plate, 1000x500x6mm
Material:
- cork-compact sheets

Application:
- for insoles and embeddings
- for height adjustments, shoe last modifications and volume adjustments of prosthetic sockets

Characteristics:
- light-weight
- bendable
- well grindable
- bonds well with contact glues
Register to see prices 0.0 USD
Register to see prices 0.0 USD
EVA (PE) foam, 4mm, terra
4x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
EVA (PE) foam, 2mm, multicolor
2x1740x960mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Silicone grease, 100g
Color white-transparent, water and oil resistant, resistance to the action of most chemicals, NLGI consistency class 2-3, -40 ° C - + 200 ° C, non-toxic.
For lubrication between metal and plastic or metal and elastomer, lubricating grease for valves, O-rings and ball valves
Register to see prices 0.0 USD
Plastazote perforated 6mm, flesh colour, 1m x 1m
1000x1000x6mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A
Register to see prices 0.0 USD
Register to see prices 0.0 USD