• Raw material
  • Chemical components
  • PVA Bags & Rolls
  • Buckles, Straps, Rivets
  • Transfer paper
Turbocast, 2x600x430mm, mini perforated, beige
Can be shaped easily.
Can be worked with hot water or with a heat gun.
Perfectly matches the patient's shapes.
Good weldability.
Lightweight and resistant.
Can be used on a model or directly on the patient who has been previously protected with Jersey.
> For finger and wrist splints
Register to see prices 0.0 USD
Plastic acrylic resin (non-toxic), 7.5kg
Plastic acrylic resin (non-toxic), pigment dye. Clean tools with water. High hardness, low shrinkage. Protective varnish for the exterior. Practical working time 20 to 30 min. Setting time 45 to 60 min. Dosage 2 for 1, 100 g / 50 g, variable depending on the application. Consumption 200 to 300 ml per m². Realization of decorative or technical elements by molding, laminating or projection. Interior and exterior decor panel. Application in casting or in lamination with fabric + fiberglass reinforcement. Direct molding on polystyrene / bodywork. Clean use, non-toxic, durable over time, low water permeability. Supplied with: 1 Part B bottle.
Dry milk-white color.
Register to see prices 0.0 USD
EVA foam material, 10mm, black
thermo-moldable at approx. 90 - 130°C., approx. 35° Shore A, 1030x1035x10mm
Register to see prices 0.0 USD
Rigid foam, ASTI-OP 700
Very stable and rigid foam to fabricate positive moulds and models subject to high mechanical load, for example lasts for shoes and insoles as well as tip additions.
- expansion factor: approx. 1.4
- density: approx. 700kg/m³
- good nailable
Register to see prices 0.0 USD
EVA (PE) foam, 10mm, terra
10x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
Loctite® glue 601 fixing product, 50ml
High strength, dimethacrylate ester-based retaining compound with medium cure speed and low viscosity; suitable for filling small gaps.LOCTITE® 601 is a green, anaerobic, low viscosity, medium cure speed, dimethacrylate ester-based retaining compound suitable for a max. diametrical clearance of 0.1 mm. It is a high strength product for applications that require a permanent bond. Fixture time on steel is 25 min and service temperature from -55ºC to +150ºC. Fluorescence allows product presence to be monitored.

1-part product, requires no mixing
Medium cure speed
High strength for permanent bonds
Low viscosity, small gap filling
Fluoresces for presence monitoring
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Polypropylen Copolymer sheet, 4mm, nature
4x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
Register to see prices 0.0 USD
Hardener for foam, ASTI-B
Hardener for pedilen foam
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Rigid foam, ASTI-OP 200
Light rigid foam
- expansion factor: approx. 5.0
- density: approx. 200kg/m³
- limited mechanical strength
Register to see prices 0.0 USD
Riveting pliers with set of rivets
Hand pop riveter with 50 each aluminium pop rivets D×L: 2.4×5.5 / 3.2×6.3 4.0×6.3 / 4.8×6.0 mm
Comprising a high quality hand pop riveter with lever action and an assortment of 200 aluminium blind rivets, in strong plastic case
Register to see prices 0.0 USD
Streifyflex®, 14mm, translucent
14x400x400 mm, ethylene vinyl acetate (EVA), moldable approx. 130-135 ° C, suitable for flexible internal sockets, in particular for sockets above the knee
Register to see prices 0.0 USD
Register to see prices 0.0 USD
EVA (PE) foam, 12mm, terra
12x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
EVA (PE) foam, 12mm, olive
12x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
EVA (PE) foam, 12mm, beige
12x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
Loctite® 243 thread locking glue, 50ml
The use of thread lockers prevents unintentional detachment and loosening of screw connections. One-component anaerobic adhesives are suitable for all types and shapes of threads. The screw connections are sealed. Reliably prevent slipping.
Liquid thread lock.
Weak tightening - Loosening possible with a normal tool.
Medium tightening - Loosening still possible with a normal tool.
Very strong tightening - Loosening only possible with a special tool or by heating (> 150 ° C).
Medium resistance, serves as a thread lock while ensuring tightness.
Manufacturer no .: 243
Chemical basis: Dimethacrylate ester
Dynamic viscosity: 1'300 mPa · s - 3'000 mPa · s
Density: 1.15 g / cm³
Flash point: 93 ° C
Temperature range: -55 ° C - 180 ° C
Maneuverability after: 10 min
Usable after: 2 h
Property: thixotropic; fluorescent under UV light; waterproof; oil resistant; vibration resistant; prevents seizure
for material: Metal
for applications: Threadlockers; Grouting; Universal use
For thread sizes M up to: M36
Resistance class: Medium
Minimum initial breakaway torque: 26 N m
Disassembly: with normal tool
Blue color
Capacity: 50 ml
Storage temperature: 8 ° C - 21 ° C
Shelf life from date of manufacture: 24 mo
Hazardous Substance Markings: SGH07 Warning; SGH09 Environmental hazard
Dangerous goods class: 9
UN number: UN3082
Register to see prices 0.0 USD
Polypropylene homopolymer sheet, 6mm, natural color
6x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Loctite® 290 thread locking glue, 50ml
The use of thread lockers prevents unintentional detachment and loosening of screw connections. One-component anaerobic adhesives are suitable for all types and shapes of threads. The screw connections are sealed. Reliably prevent slipping.
Liquid thread lock.
Use:
Weak tightening - Loosening possible with a normal tool.
Medium tightening - Loosening still possible with a normal tool.
Very strong tightening - Loosening only possible with a special tool or by heating (> 150 ° C).
For small screws up to M6 and for subsequent screw locking.
Manufacturer no .: 290
Chemical basis: Dimethacrylate ester
Dynamic viscosity: 20 mPa s - 55 mPa s
Density: 1.07 g / cm³
Flash point: 93.3 ° C
Temperature range: -55 ° C - 150 ° C
Maneuverability after: 20 min
Usable after: 3 h
Property: High capillarity; fluorescent under UV light; waterproof; oil resistant; vibration resistant; prevents seizure
for material: Metal
for applications: Threadlockers; Grouting; Porosity of weld seams; Porosity of cast iron and sintered metal parts; Pre-assembled screw connections
For thread sizes M up to: M6
Resistance class: Medium
Minimum initial breakaway torque: 10 N m
Disassembly: only by heating
Green color
Capacity: 50 ml
Storage temperature: 8 ° C - 21 ° C
Shelf life from date of manufacture: 29 mo
Hazardous substances marking: SGH07 Warning

Register to see prices 0.0 USD
PVA prosthetic release film roll, 1000x0.08mmx22.8m
For stratification
1m x 22.5m x 80 microns
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Plastazote non-perforated, skin coloured, 20mm
1000x1000x20mm, 15-18 Shore A
Register to see prices 0.0 USD
Pattern Board, A1
Composed of a solid core and two tough outer surfaces.
Self-healing: Exterior surfaces self-repair after cutting.

Gridlines in cm (back) and inches (front). The type designation refers to the size of the print.
Length: 870 mm
Width: 620 mm
Height: 3mm

Register to see prices 0.0 USD
KEASY sleeve ∅210x500x6,5mm
This type of liners ensures comfort and protection in a rigid laminated or thermoformed socket for patients with low activity level or for first fitting.
We recommend to wear a sock, a sleeve or a jersey as an interface between the skin and the KEASY liner.
Register to see prices 0.0 USD
KEASY sleeve ∅195x510x6,5mm
This type of liners ensures comfort and protection in a rigid laminated or thermoformed socket for patients with low activity level or for first fitting.
We recommend to wear a sock, a sleeve or a jersey as an interface between the skin and the KEASY liner.
Register to see prices 0.0 USD
KEASY sleeve ∅160x400x6,5mm
This type of liners ensures comfort and protection in a rigid laminated or thermoformed socket for patients with low activity level or for first fitting.
We recommend to wear a sock, a sleeve or a jersey as an interface between the skin and the KEASY liner.
Register to see prices 0.0 USD
EVA (PE) foam, 4mm, multicolor
4x1740x960mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
KEASY sleeve ∅180x500x6,5mm
This type of liners ensures comfort and protection in a rigid laminated or thermoformed socket for patients with low activity level or for first fitting.
We recommend to wear a sock, a sleeve or a jersey as an interface between the skin and the KEASY liner.
Register to see prices 0.0 USD
KEASY sleeve ∅130x500x6,5mm
This type of liners ensures comfort and protection in a rigid laminated or thermoformed socket for patients with low activity level or for first fitting.
We recommend to wear a sock, a sleeve or a jersey as an interface between the skin and the KEASY liner.
Register to see prices 0.0 USD
Polypropylene Copolymer sheet, 3mm, natural color
3x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
Register to see prices 0.0 USD
KEASY sleeve ∅110x305x5mm
This type of liners ensures comfort and protection in a rigid laminated or thermoformed socket for patients with low activity level or for first fitting.
We recommend to wear a sock, a sleeve or a jersey as an interface between the skin and the KEASY liner.
Register to see prices 0.0 USD
Polypropylene homopolymer sheet, 5mm, natural color
5x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
Register to see prices 0.0 USD
Polypropylene homopolymer sheet, 5mm, terra
5x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
Register to see prices 0.0 USD
Polypropylene homopolymer sheet, 5mm, olive
5x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
Register to see prices 0.0 USD
Polypropylene homopolymer sheet, 5mm, beige
5x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
Register to see prices 0.0 USD
Pedilin Cone, ∅485, ∅300, L=420, 5mm
For years, Pedilin® has been successfully employed in the production of liners.

The material is skin-friendly, retains its shape and is hygienic. These prefabricated cones have a precise, stable bonding edge. Ready for thermoplastic shaping, Pedilin® cones save sanding and gluing time.

Prefabricated cones made of Pedilin for fabricating liners
Three different circumferences available
Precise and stable bonded edge
Ready to thermoform immediately
Saves gluing and sanding work
Good shape retention
Hygenic
Washable
Temperature recommendation: 130 degrees C / 266 degrees F (convection oven)
Register to see prices 0.0 USD
Pedilin Cone, ∅425, ∅270, L=420, 5mm
For years, Pedilin® has been successfully employed in the production of liners.

The material is skin-friendly, retains its shape and is hygienic. These prefabricated cones have a precise, stable bonding edge. Ready for thermoplastic shaping, Pedilin® cones save sanding and gluing time.

Prefabricated cones made of Pedilin for fabricating liners
Three different circumferences available
Precise and stable bonded edge
Ready to thermoform immediately
Saves gluing and sanding work
Good shape retention
Hygenic
Washable
Temperature recommendation: 130 degrees C / 266 degrees F (convection oven)
Register to see prices 0.0 USD
Pedilin Cone, ∅390, ∅200, L=420, 5mm
For years, Pedilin® has been successfully employed in the production of liners.

The material is skin-friendly, retains its shape and is hygienic. These prefabricated cones have a precise, stable bonding edge. Ready for thermoplastic shaping, Pedilin® cones save sanding and gluing time.

Prefabricated cones made of Pedilin for fabricating liners
Three different circumferences available
Precise and stable bonded edge
Ready to thermoform immediately
Saves gluing and sanding work
Good shape retention
Hygenic
Washable
Temperature recommendation: 130 degrees C / 266 degrees F (convection oven)
Register to see prices 0.0 USD
Streifyflex®, 12mm, translucent
12x400x400mm, ethylene vinyl acetate (EVA), moldable at approx. 130-135 °C, suitable for flexible inner sockets, especially for above-knee sockets
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Hook and Loop Fasteners with deflection-loop and flap, 10pcs
- 100 % polyamide
- buckle made of white unbreakable plastic material
- the hook- and loop closure system can be riveted or sewn to the work piece quickly and easily

PU = 10 pcs/colour
Register to see prices 0.0 USD
Schein-Orthofix adhesive K 20, 4kg
For adhering, especially EVA foam and many textiles
Register to see prices 0.0 USD