100pc
Application:
for manufacturing of closures for orthopaedic shoes

1000x1000x12mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

10x800x550mm

4x1000x1000mm

For adhering, especially EVA foam and many textiles

- 100 % polyamide
- buckle made of white unbreakable plastic material
- the hook- and loop closure system can be riveted or sewn to the work piece quickly and easily

PU = 10 pcs/colour

2x2000x1000mm

brass

12x400x400mm, ethylene vinyl acetate (EVA), moldable at approx. 130-135 °C, suitable for flexible inner sockets, especially for above-knee sockets

For years, Pedilin® has been successfully employed in the production of liners.

The material is skin-friendly, retains its shape and is hygienic. These prefabricated cones have a precise, stable bonding edge. Ready for thermoplastic shaping, Pedilin® cones save sanding and gluing time.

Prefabricated cones made of Pedilin for fabricating liners
Three different circumferences available
Precise and stable bonded edge
Ready to thermoform immediately
Saves gluing and sanding work
Good shape retention
Hygenic
Washable
Temperature recommendation: 130 degrees C / 266 degrees F (convection oven)

For years, Pedilin® has been successfully employed in the production of liners.

The material is skin-friendly, retains its shape and is hygienic. These prefabricated cones have a precise, stable bonding edge. Ready for thermoplastic shaping, Pedilin® cones save sanding and gluing time.

Prefabricated cones made of Pedilin for fabricating liners
Three different circumferences available
Precise and stable bonded edge
Ready to thermoform immediately
Saves gluing and sanding work
Good shape retention
Hygenic
Washable
Temperature recommendation: 130 degrees C / 266 degrees F (convection oven)

For years, Pedilin® has been successfully employed in the production of liners.

The material is skin-friendly, retains its shape and is hygienic. These prefabricated cones have a precise, stable bonding edge. Ready for thermoplastic shaping, Pedilin® cones save sanding and gluing time.

Prefabricated cones made of Pedilin for fabricating liners
Three different circumferences available
Precise and stable bonded edge
Ready to thermoform immediately
Saves gluing and sanding work
Good shape retention
Hygenic
Washable
Temperature recommendation: 130 degrees C / 266 degrees F (convection oven)

5x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

5x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

5x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

5x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

This type of liners ensures comfort and protection in a rigid laminated or thermoformed socket for patients with low activity level or for first fitting.
We recommend to wear a sock, a sleeve or a jersey as an interface between the skin and the KEASY liner.

3x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

This type of liners ensures comfort and protection in a rigid laminated or thermoformed socket for patients with low activity level or for first fitting.
We recommend to wear a sock, a sleeve or a jersey as an interface between the skin and the KEASY liner.

This type of liners ensures comfort and protection in a rigid laminated or thermoformed socket for patients with low activity level or for first fitting.
We recommend to wear a sock, a sleeve or a jersey as an interface between the skin and the KEASY liner.

4x1740x960mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

This type of liners ensures comfort and protection in a rigid laminated or thermoformed socket for patients with low activity level or for first fitting.
We recommend to wear a sock, a sleeve or a jersey as an interface between the skin and the KEASY liner.

50 cm

This type of liners ensures comfort and protection in a rigid laminated or thermoformed socket for patients with low activity level or for first fitting.
We recommend to wear a sock, a sleeve or a jersey as an interface between the skin and the KEASY liner.

This type of liners ensures comfort and protection in a rigid laminated or thermoformed socket for patients with low activity level or for first fitting.
We recommend to wear a sock, a sleeve or a jersey as an interface between the skin and the KEASY liner.

Composed of a solid core and two tough outer surfaces.
Self-healing: Exterior surfaces self-repair after cutting.

Gridlines in cm (back) and inches (front). The type designation refers to the size of the print.
Length: 870 mm
Width: 620 mm
Height: 3mm

1000x1000x20mm, 15-18 Shore A

For stratification
1m x 22.5m x 80 microns

The use of thread lockers prevents unintentional detachment and loosening of screw connections. One-component anaerobic adhesives are suitable for all types and shapes of threads. The screw connections are sealed. Reliably prevent slipping.
Liquid thread lock.
Use:
Weak tightening - Loosening possible with a normal tool.
Medium tightening - Loosening still possible with a normal tool.
Very strong tightening - Loosening only possible with a special tool or by heating (> 150 ° C).
For small screws up to M6 and for subsequent screw locking.
Manufacturer no .: 290
Chemical basis: Dimethacrylate ester
Dynamic viscosity: 20 mPa s - 55 mPa s
Density: 1.07 g / cm³
Flash point: 93.3 ° C
Temperature range: -55 ° C - 150 ° C
Maneuverability after: 20 min
Usable after: 3 h
Property: High capillarity; fluorescent under UV light; waterproof; oil resistant; vibration resistant; prevents seizure
for material: Metal
for applications: Threadlockers; Grouting; Porosity of weld seams; Porosity of cast iron and sintered metal parts; Pre-assembled screw connections
For thread sizes M up to: M6
Resistance class: Medium
Minimum initial breakaway torque: 10 N m
Disassembly: only by heating
Green color
Capacity: 50 ml
Storage temperature: 8 ° C - 21 ° C
Shelf life from date of manufacture: 29 mo
Hazardous substances marking: SGH07 Warning

6x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

The use of thread lockers prevents unintentional detachment and loosening of screw connections. One-component anaerobic adhesives are suitable for all types and shapes of threads. The screw connections are sealed. Reliably prevent slipping.
Liquid thread lock.
Weak tightening - Loosening possible with a normal tool.
Medium tightening - Loosening still possible with a normal tool.
Very strong tightening - Loosening only possible with a special tool or by heating (> 150 ° C).
Medium resistance, serves as a thread lock while ensuring tightness.
Manufacturer no .: 243
Chemical basis: Dimethacrylate ester
Dynamic viscosity: 1'300 mPa · s - 3'000 mPa · s
Density: 1.15 g / cm³
Flash point: 93 ° C
Temperature range: -55 ° C - 180 ° C
Maneuverability after: 10 min
Usable after: 2 h
Property: thixotropic; fluorescent under UV light; waterproof; oil resistant; vibration resistant; prevents seizure
for material: Metal
for applications: Threadlockers; Grouting; Universal use
For thread sizes M up to: M36
Resistance class: Medium
Minimum initial breakaway torque: 26 N m
Disassembly: with normal tool
Blue color
Capacity: 50 ml
Storage temperature: 8 ° C - 21 ° C
Shelf life from date of manufacture: 24 mo
Hazardous Substance Markings: SGH07 Warning; SGH09 Environmental hazard
Dangerous goods class: 9
UN number: UN3082

12x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

12x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

12x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

14x400x400 mm, ethylene vinyl acetate (EVA), moldable approx. 130-135 ° C, suitable for flexible internal sockets, in particular for sockets above the knee

Hand pop riveter with 50 each aluminium pop rivets D×L: 2.4×5.5 / 3.2×6.3 4.0×6.3 / 4.8×6.0 mm
Comprising a high quality hand pop riveter with lever action and an assortment of 200 aluminium blind rivets, in strong plastic case

Light rigid foam
- expansion factor: approx. 5.0
- density: approx. 200kg/m³
- limited mechanical strength

25m

Hardener for pedilen foam

4x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

3x800x800mm

High strength, dimethacrylate ester-based retaining compound with medium cure speed and low viscosity; suitable for filling small gaps.LOCTITE® 601 is a green, anaerobic, low viscosity, medium cure speed, dimethacrylate ester-based retaining compound suitable for a max. diametrical clearance of 0.1 mm. It is a high strength product for applications that require a permanent bond. Fixture time on steel is 25 min and service temperature from -55ºC to +150ºC. Fluorescence allows product presence to be monitored.

1-part product, requires no mixing
Medium cure speed
High strength for permanent bonds
Low viscosity, small gap filling
Fluoresces for presence monitoring