1000x1000x5mm, 15-18 Shore A

1000x1000x6mm, 15-18 Shore A

1000x1000x12mm, 15-18 Shore A

1000x1000x3mm, 15-18 Shore A

1000x1000x10mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

1000x1000x12mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

1000x1000x2mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

1000x1000x3mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

1000x1000x4mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

1000x1000x5mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

1000x1000x6mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

Plastic acrylic resin (non-toxic), pigment dye. Clean tools with water. High hardness, low shrinkage. Protective varnish for the exterior. Practical working time 20 to 30 min. Setting time 45 to 60 min. Dosage 2 for 1, 100 g / 50 g, variable depending on the application. Consumption 200 to 300 ml per m². Realization of decorative or technical elements by molding, laminating or projection. Interior and exterior decor panel. Application in casting or in lamination with fabric + fiberglass reinforcement. Direct molding on polystyrene / bodywork. Clean use, non-toxic, durable over time, low water permeability. Supplied with: 1 Part B bottle.
Dry milk-white color.

Dimensions WxDxH 33 1/8 x 22 7/8 x 16 1/8 inch

4x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

5kg

3x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

5x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

6x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

3x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

3x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

3x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

3x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

4x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

4x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

4x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

4x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

5x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

5x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

5x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

5x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

6x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D

50m

nickel plated

nickel plated

100pc

The 3M spray adhesive is versatile and ideal for the reliable, clean and fast bonding of large areas. It is ideal for optimizing complex production processes and simplifying everyday work in almost all craft and industrial sectors. It is also suitable for everyday use at home. It eliminates the need for brushes, spray guns and other tools. The spray adhesive is free from silicone and chlorinated solvents. The optimal spray distance is 30 cm

Transparent, thermoplastic skin-friendly, can be mixed with all other RESACRYL acrylic resins. Cuing by means of approx. 1 – 3 % hardener powder.

Light rigid foam
- expansion factor: approx. 5.0
- density: approx. 100kg/m³
- limited mechanical strength

Light rigid foam
- expansion factor: approx. 5.0
- density: approx. 200kg/m³
- limited mechanical strength

Light rigid foam
- expansion factor: approx. 5.0
- density: approx. 300kg/m³
- limited mechanical strength

Light rigid foam
- expansion factor: approx. 5.0
- density: approx. 300kg/m³
- limited mechanical strength

Very stable and rigid foam to fabricate positive moulds and models subject to high mechanical load, for example lasts for shoes and insoles as well as tip additions.
- expansion factor: approx. 1.4
- density: approx. 700kg/m³
- good nailable

Very stable and rigid foam to fabricate positive moulds and models subject to high mechanical load, for example lasts for shoes and insoles as well as tip additions.
- expansion factor: approx. 1.4
- density: approx. 700kg/m³
- good nailable

100pc