• Feet
  • Connection adapters
  • Adapters & Tubes
  • Knee joint
  • Locking devices
  • Valve
  • Cosmetic foam
  • Waterproof line
Shuttle lock
Shuttle Lock 7H09A is intended for tibia and hip prosthe- sis for conjunction with a silicone liner. The lock allows automatic fixation. The pin is unlocked by pressing the spring-loaded lock button.
The lock pin is pulled up by turning the lock button, allowing to eliminate pin motion along the axis and clicking sounds.
There is a lamination kit.
Activity level: М1, М2, М3, М4
Material: Aluminum alloy
Weight: 111g
Register to see prices 0.0 USD
Lock pin with tube clamp connection
Lock 7H07A is intended for use in tibia prosthesis with long stump and hip prosthesis for conjunction with a silicone liner. The lock allows automatic fixation. Release of pin occurs when pressing the spring-loaded button of lock.
Activity level: М1, М2, М3, М4
Maximum weight of patient: 100kg
Material: Aluminum alloy
Build height: 45 mm
Weight: 304g
Register to see prices 0.0 USD
Pyramid Adapter Lock
Lock 7H05A is intended for use in tibia and femur prosthesis in conjunction with a silicone liner, which is threaded pin of lock. The lock allows automatic fixation. Release of pin occurs when pressing the spring-loaded button of lock. By turning the lock button is carried out fixation of pin that allows eliminating piston-movement and clicking sounds.
The device has a sphere with pyramid for connection with bearing module and prong steel base for connection with socket.
Activity level: М1, М2, М3, М4
Maximum weight of patient: 100kg
Register to see prices 0.0 USD
4 Hole lock
Lock 7H08A is intended for use in tibia (including for the manufacture of sockets according to express prosthetics technology) and femur prosthesis.
The principle of locking is the same as for the lock 7H 05A. Consists of an insert with a hemisphere and an area under 4 holes (installed on plaster positive before lamination or thermoforming) and the lock case (installed during assembly of the prosthesis on the outside of the socket). In the distal part of the lock there are holes for mounting adapter - 7H01K, 7H02K, or 7H03K. Complete with 8 steel screws, plastic cone and screw for locking an insert on the positive.
Activity level: М1, М2, М3, М4
Maximum weight of patient: 125kg
Material: Aluminum alloy
Maximum weight of patient: 125kg
Weight 175g
Register to see prices 0.0 USD