Beveled measuring tips for measurements at the bottom of the thread and in narrow grooves. Rounded nose tips for interior measurements. Graduation with high contrast. With stop screw. Fully tempered to ref. 300, tempered measuring surfaces from ref. 500.
Material: Stainless steel, INOX / Metrology: Analog / Vernier graduation: mm / inches / Packing: Robust box / Graduation: 1/20 mm / Graduation: 1/128 inch / Locking: Locking screw on top / Switchable reading: mm / inch / Measuring range: 0 mm - 300 mm / Spout length: 90mm / Calibration: A1 / ⌀ Internal measuring shoulder: 10 mm / Standard: DIN 862 / Permissible error: 0.05 mm

Strong base with lapped standing surface. Reading 0.02 mm with fine adjustment. The scriber is carbide tipped. With adjustable measuring beam, magnifying glass and locking screw.
Metrology: Analogue / Material: Stainless steel, INOX / Surface base, Length: 135 mm / Tracing height: 300 mm / Vernier: 1/50 mm / Calibration: E1 / Base area, width: 90 mm / Rule section: 28 × 9 mm / Allowable error: 0.06 mm

Matte chromed anti-glare reading parts.
Fine graduation, high contrast.
Finely honed measuring surfaces.
Locking screw at the top.
Technical data
All parts: hardened / Depth gauge: flat / Metrology: analog / Locking: Locking screw on top / Thread table: Caliper table / Material: Stainless steel, INOX / Switchable reading: mm - inch / Graduation: 1/20 mm / Graduation: 1/128 inch / Allowable error: 0.05 mm / Standard: DIN 862 / Measuring range: 0 mm - 150 mm / Calibration: A1 / Packing: Case / Reading: 0.05 mm / Spout length: 40 mm

All faces and edges ground. Inspection test faces ground.
Application: For accurate general workshop work.
Accuracy: DIN 875 / 2 − angle tolerance e.g. for size 100×70 = 0.030 mm.
Standard: DIN 875
Stock length: 600×300mm
Right angle tolerance: 0.08 mm
Shank cross-section: 40×8 mm

Max. Length tripod = 900mm
Min. Length tripod = 200mm

270mm

Tape measure of light quality, for everyday use. Yellow/white ribbon in polyfiber fabric with black graduation on both sides. Metal tip at both ends.
Length: 150cm
Width: 18.5mm

T-PLATE foot pressure plate is the most accurate and cost-effective way to identify the plantar pressure profile.
Traditional tools cannot provide the same information as the T-Plate. It will increase your credibility and most of all help you make the good diagnosis.
Deliver with software and manual in English.

1 straight point; knurled metal handle.
overall length: 180 mm

All faces and edges ground. Inspection test faces ground.
Application:
For accurate general workshop work.
Accuracy:
DIN 875 / 2 − angle tolerance e.g. for size 100×70 = 0.030mm.

Sturdy design with long arms, made of tool steel. Points and measuring faces ground and hardened. Solid spindle with adjusting nut for quick and fine adjustment. Annular spring provides constant spring tension.
With replaceable tips.

Sturdy design with long arms, made of tool steel. Points and measuring faces ground and hardened. Solid spindle with adjusting nut for quick and fine adjustment. Annular spring provides constant spring tension.
With replaceable tips.

Handy small spirit level. Die-cast aluminium profile. Face-milled measuring faces. Unbreakable acrylic vials (vertical + horizontal).
Additionally 360° rotating vial. Vee groove and magnet in the measuring face.

with centring jigs for conical and cylindrical cups
OOMAALIGGJ

Precision machined edges and flat surfaces

Solid semicircular graduated arc with graduation 0 − 180°; reading 1°.
Scale plate non-glare chrome-plated. With clamping nut.

220V power supply. Dimensions: 45 x 40.5 x 16 cm
Based on the prince of light transmission for optical fiber, the assembly of the platform was developed by the equal and sees the image reflected on the interior mirror support. The quality of the bending and contact rendering allows you to obtain precise diagnoses. Very robust (15 mm thick acrylic glass), this podoscope also has a modern and elegant design

For attachment to the Ottobock 743A11 casting apparatus. Provides functional casting of ischial containment sockets while bearing weight. Has pneumatic pressure adjustment and a short-stroke cylinder. Pressure regulator provides individual pressure adjustment of the femoral pad. The pneumatic unit of the SIT* cast casting apparatus can be directly connected to the compressed air supply system (connecting hose and service unit with pressure regulator are not included in the delivery).
Scope of Delivery:
ncludes 8 SIT-casting forms: 743Y50=L1, =R1, =L2, =R2, =L3, =R3, =L4, =R4

With clearance plate, line : 4 m, D 2mm

- Robust parcel scales for the dispatch department.
- Very simple operation with four buttons.
- Display unit with numeral height 25 mm can be placed away from the platform; can be positioned or mounted using the flexible cable approx. 2 m long.
- Suitable for mains and battery operation, auto-off after 3minutes.

Supplied with:
Mains adapter and wall bracket for display unit.
maximum weighing range: 0 kg - 150 kg
Scale divisions: 50 g
Number height display unit: 25 mm
Reproducibility: 50 g
Manufacturer's designation: EOB
Dimensions of weighing plate: 315×305 mm
Display unit width: 215 mm
Display unit depth: 110 mm
Display unit height: 50 mm
Net weight: 3.8 kg

Included:
Basic-unit Assistant-System
Foot-plate Assistant-System
Scoliosis-unit Assistant-System
Mirror-unit Assistant-System
Head strap with frame Assistant-System
Block and tackle Assistant-System
Seat- / stand-support (with fixing parts)

edding 400, round point, line thickness approx. 1 mm.
Application:
For marking on almost all materials, even metal, glass, plastic.
Manufacturer's designation: edding 400
maximum line thickness: 1 mm
Writing colour: black
quick-drying: yes
waterproof: yes
refillable: yes

aluminium, to determine pelvic alignment

Equipment:
Quick-action clamping device, two inflatable clamping devices for attaching sockets, holder for knee joint adapter inserts, integrated measuring accessories, e.g. mm rulers, goniometers, height-adjustable footplate, TT and TF alignment pads. To be used for bench alignment of Ottobock modular lower limb prostheses (TF and TT) according to Ottobock alignment recommendations
Dimensions:
WxDxH 800 x 900 x 2,100 mm
31 1/2 x 35 3/8 x 82 5/8 inch
Scope of delivery:
Includes one right and one left adapter insert for Ottobock knee joints (adapter insert article numbers: 743Y579, 743Y580, 743Y581, 743Y582, 743Y583, 743Y584, 743Y608, 743Y629, 743Y681)

fixing of round and angular one- and two-way suction tubes and of diverse
plaster model rods possible up to 35 mm
fixing of the prosthetic socket can be done either with the tude adapter or
with the S.A.C.H.-Foot Adapter
horizontal shifting of the upper and lower fixing by 50 mm each is possible
in order to transfer extreme socket positions
firmly integrated, easily readable height scale (900 mm)
high quality, durable materials
stepplessly rotatable by 360° degrees via wing screw
For video of user's manual : https://www.youtube.com/watch?v=hVbUbQwMsiY

Voltage tester, Cap square 150X100mm, Straight carbide tracing point, Steel rulers 300mm, Calipers 150mm, Measuring tapes: 2,5 meters, Laser meter, Bubble levels, Plastic folding rule, Lid tray , Plastic transport box

Automatic blocking of the ribbon during stretching.
Rewinding the ribbon by pressing the button.
Mobile terminal hook.
Yellow tape measure, printed black / red, acrylic coating for better resistance to abrasion.
Case dimensions: 52x49x22mm
Ribbon length: 2m
Band width: 13mm

Boîtier en plastique avec clip-ceinture amovible. Rembobinage automatique amorti et blocage du ruban. Crochet terminal mobile, CRM 391

Bosch Quigo, working area : 10 m

The compromise center of rotation for accurate location of orthosis joints based on Nietert can be marked directly on the leg. The a-p knee width is divided by the proportion 60:40 at a distance of 25 mm above the gap between tibia and femur.

Equipment:
Quick-action clamping device, two inflatable clamping devices for attaching sockets, holder for knee joint adapter inserts, integrated measuring accessories, e.g. mm rulers, goniometers, height-adjustable footplate, TT and TF alignment pads. To be used for bench alignment of Ottobock modular lower limb prostheses (TF and TT) according to Ottobock alignment recommendations
Dimensions:
WxDxH 800 x 900 x 2,100 mm
31 1/2 x 35 3/8 x 82 5/8 inch
Scope of delivery:
Includes one right and one left adapter insert for Ottobock knee joints (adapter insert article numbers: 743Y579, 743Y580, 743Y581, 743Y582, 743Y583, 743Y584, 743Y608, 743Y629, 743Y681)

The heel height measuring device comes with an integrated database for storing user data and orders, a multilingual display (DE, EN, NL, FR) with backlight, colour touchscreen with measurements in cm, mm or inches as well as a sturdy and easy-to-clean lower plate with crosshairs to help you position measuring objects precisely. Straightforward zero point calibration (alternative: using the lower plate(s) as the reference point).
Dimensions WxDxH: 500 x 400 x 600 mm
Electrical connection in V/Hz/kW: 1 x 230 / 50–60 / 0.1
Colour: light grey [RAL 7035]
Material: Steel, stainless steel, aluminium
Type of Planning and Equipment: Orthopedic Shoe Technology and Leather Processing

Automatically levelling graticule laser with vertical and horizontal laser line. The laser lines can be switched individually and together form crossing lines. In addition, the laser is equipped with a laser spot. The laser beam is easily visible in daylight and can be mounted on a stand. In addition, the pendulum system can be locked for transportation.
Scope of delivery includes: 1 graticule laser, 1 tripod stand, 1 protective pouch and 3 5V LR06 Mignon (AA) batteries.
Specifications
Dimensions LxWxH: 110 x 60 x 95 mm
Power supply: 3 x Mignon (AA)
Wavelength: 635 (Laser class 2) nm
Output power: < 1 mW
Leveling speed: < 5 sec.
Automatic leveling range: 5 degrees
Connection thread: W 1/4"
Laser light color: Red
Projection range of laser light: max. 10 m

Professional-quality Goniometer feature clearly marked degree increments and easy-to-read inch and centimeter linear measurements.
Has two 180 degrees scales that read in opposite directions. 14" long. Scales marked in 10 increments. Non-locking friction arm.