• Oven, Heating plate
  • Drilling, Milling, Sawing
  • Abrasive
  • Vacuum technology
  • Injection technology
  • Pressurized air system
  • Spare parts for machinery
  • Electric hand machine
Insulation and adhesive tape, 50mm, 10m
High-quality adhesive tape made of PVC, it is corrosion-resistant and it is also acid and alkali-resistant. Due to its high insulation resistance, the tape is ideal for use in electrical installations. The insulation adhesive tape can be used for repairs in automobile, ship, land and construction sectors without any problems.
Register to see prices 0.0 USD
"HOLZSTAR" band saw HBS 361-2, for plastic and metal
- Ideal for ambitious modellers and do-it-yourselfers
- Flywheels made of die-cast aluminum with special coating
- Aluminium cast iron worktable swiveling up to 45°
- Equipped with precise 3-rolls saw band guide above and below the table
- Aluminum longitudinal stop with quick clamping precisely adjustable with the aid of a magnifying glass and millimeter scale
- Two belt speeds adjustable

also referenced under: HBS 361-2, EMACBSAWBS
Register to see prices 0.0 USD
Register to see prices 0.0 USD
"HOLZSTAR" band saw, for wood, plastic and metal
- Heavy design with high dead weight for maximum running smoothness
- Particularly quiet and pretorsionally stiff machine housing
- Cast flywheels with rubber coating and cleaning brush
- 3-roller precision saw band guide as standard at top and bottom
- Large cast iron saw table, swivels from 0° to +15° with ground and polished surface
- Large cast-iron parallel fence with round rod guide, easilyguide, easily movable
- Saw blade tension indicator
- Precise cutting height adjustment overover toothed rack with millimetre scale
- Self-braking motor

also referenced under: HBS 640 AS
Register to see prices 0.0 USD
"OPTIMILL" drilling and milling machine BF 16Vario
Versatile application possibilities
Two-stage gear ratio
Tool holder MK 2
Safety electronics in 24 Volt version
EMC filter class C1
Drilling and milling head can be tilted by ± 90 ° on both sides, thus drilling and milling in angular position as required
Height-adjustable and large-dimensioned protective screen with microswitch
Accurate delivery through positionable scale rings on all handwheels
Simple and clear operating unit with on-off switch, potentiometer and emergency stop impact switch
Infinitely variable speed from 100 to 3,000 min-1
High concentricity measured by tapered roller bearing better than 0.015 mm in quill
Stable column with dovetail guide via wedge bars adjustable on all 3 axes
Game in the feed spindle adjustable and adjustable
Column laterally displaceable for extended application
Massive cross table with T-slots and coolant channel as well as adjustable end stops
Integrated longitudinal scale in the cross table
All travel paths can be read on scales
Clean milling pattern by individually clamped guides
Inexpensive and stable in value

also referenced under: OPTImill BF 16Vario
Register to see prices 0.0 USD
Register to see prices 0.0 USD
1/4 "air handling unit
with gauge and support type T
Adjustable pressure 0-8.5 bar
Max. Flow 1'134 l / min
Plastic bowl, manual drain
Register to see prices 0.0 USD
Abrasive belt sander, 2 speeds, conical long shaft
Swinging honing machine with funnel-type milling machine
All models we offer-ensure the highest efficiency, versatility and safety
All the models can be fitted with suction device
Weight: 100 Kg
Headphones mandatory (according to DIN EN 352)

380V, 1.2 - 1.7kW / 1400 - 2800 rpm

also referenced under: OOMAMARP3000, CRM 85
Register to see prices 0.0 USD
Abrasive disk ∅350mm
also referenced under: OOMAMARPOL3500A, OOMAMARPOL3500C CRM 90, CRM 90.1
Register to see prices 0.0 USD
Adaptator 5/8 female / M16 male
also referenced under: OOMAMARP3000N, CRM 92.1
Register to see prices 0.0 USD
Adaptator M16 female / 5/8 male
also referenced under: OOMAMARP3000O, CRM 92.2
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Adaptator M16 male / M16 male
also referenced under: OOMAMARP3000C, CRM 92
Register to see prices 0.0 USD
Airbrush Fabric Hose 1/8" & 1/4" Internal Thread 3m
Suitable for all airbrush devices with 1/8" connection to 1/4" connection.
Characteristics
Connections: 12 / 9 mm (1/4 | 1/8 inch) IG
Diameter (internal): 4 mm
Hose: diameter: Ø 4mm (inside)
Ø 7mm (outside)
Hose: Type: Pond Hose
Register to see prices 0.0 USD
Angle grinder
Light-weight and powerful 115 mm one-hand angle grinder in handy compact design, drive head can be rotated in 90° steps, quick adjustment of protective cover, M14 grinding spindle thread.
800 W motor, slim easy-grip casing, restart inhibit.
Supplied with protective hood, clamping set and additional handle.
Power consumption: 800 W
Speed range: 12,000 min-1
maximum disc ⌀: 115 mm
maximum cutting depth: 28 mm
Weight: 1.9 kg
maximum vibration to EN: 4.2 m/s2
Restart block: yes
Register to see prices 0.0 USD
Angle grinder for metal
2200 W / 230 mm angle grinder with start-up current limitation and restart inhibit.
Supplied with:
Supplied with protective hood, additional handle, clamping set.
maximum disc ⌀: 230 mm
maximum speed: 6,600 min-1
Restart block: yes
maximum vibration to EN: 8.7 m/s2
Weight: 5.2 kg
Power consumption: 2,200 W
maximum cutting depth: 68 mm
Manufacturer's designation: WS22-230E
Register to see prices 0.0 USD
Aspirator filter
D 325/L 600mm
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Automatic piston compressor, 100l
- Designed for demanding continuous use when oil-free and clean compressed air is required
- Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
- Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
- Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
- The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon
High-quality maximum equipment
- Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous dirt, oil and condensate separation
- One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
- Two comfort safety quick couplings
- High-quality CONDOR pressure switch
- One pressure gauge each for container and working pressure
- Simple condensate drain via ball valve
Compressed air lines and reservoirs with long service life
- Flexible armored hose line with heat protection prevents vibration fractures
- Inside and outside hot-dip galvanized, corrosion-protected compressed air tank with 15-year guarantee against rusting through
Comfort safety quick couplings
- One-hand safety couplings according to DIN EN 983 used as standard by AIRCRAFT as first manufacturer
- Two separate locking systems for maximum working safety
- No whipping of the hose line during uncoupling
Convenient transport
- Transport back-friendly in upright position and without lifting
- Additional transport handle directly on the container
- Puncture-proof PU foam wheels
- Stable steering chassis with parking brake
TÜV-free
- Type-tested by an approved monitoring body
- Recurring container inspections also possible by a competent person
Immediately ready for use
- Fully automatic on-off operation
- With all safety devices
- Completely ready for connection

also referenced under: AIRPROFI 440/100 OF PRO, EMACAIRCO380, CRM 178
Register to see prices 0.0 USD
Automatic piston compressor, 50l
- Designed for demanding continuous use when oil-free and clean compressed air is required
- Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
- Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
- Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
- The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon
High-quality maximum equipment
- Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous separation of dirt, oil and condensate
- One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
- Two comfort safety quick couplings
- High-quality CONDOR pressure switch
- One pressure gauge each for tank and working pressure
- Simple condensate drain via ball valve
Compressed air lines and reservoirs with long service life
- Flexible armored hose line with heat protection prevents vibration fractures
- Inside and outside hot-dip galvanized, corrosion-protected compressed air reservoir with 15-year warranty against rusting through
Comfort safety quick couplings
- One-hand safety couplings according to DIN EN 983 used by AIRCRAFT as the first manufacturer in series production
- Two separate locking systems for maximum working safety
- No whipping of the hose line during uncoupling
Convenient transport
- Transport back-friendly in upright position and without lifting
- Additional transport handle directly on the container
- Puncture-proof PU foam wheels
- Stable steering chassis with parking brake
Immediately ready for use
- Fully automatic on-off operation
- With all safety devices
- Completely ready for connection

also referenced under: AIRPROFI 220/50 OF PRO, CRM 178.3
Register to see prices 0.0 USD
Automatic screw compressor, 1000l
Effective delivery volume approx: 1000 l/min
Maximum Pressure: 10 bar
Pressure vessel capacity: 500 l
Air outlet: ¾ "
Length approx: 1980 mm
Width/depth approx: 700 mm
Height approx: 1630 mm
Weight approx: 307 kg
Absorbed power electric motor: 7.5 kW
Supply voltage: 400 V
Mains frequency: 50 Hz
Motor type: Electric
Sound pressure level Lp: 68 dB(A)
Register to see prices 0.0 USD
Ball valve
1/4"
Register to see prices 0.0 USD
Ball valve, 1/2"
also referenced under: OOMAVAPUCR10V, CRM 60
Register to see prices 0.0 USD
Band saw blade 2560x12x0.5mm
- Perfect for cutting soft and hardwoods, plastics, plastics and non-ferrous metals.
- Tooth-tip Hardened Band Saw Blade with approx. 60-62 HRC
- The tooth shape, the arrangement of the teeth and the hardened tooth tips guarantee a perfect straight cut and a long service life
- The heat treated steel strip counteracts the bending of the band saw blade and thus reduces the risk of sheet tearing
- Saw bands German quality stainless steel with optimum price-performance ratio
Register to see prices 0.0 USD
Base for bench-top drum grinder and abrasive belt
Dimensions (LxWxH): 320 x 270 x 825 mm
Weight (net): approx. 14.5 kg
Register to see prices 0.0 USD
Battery charger, 18 V
Very compact Li-ion fast charger with practical cable reel, for 14.4 to 18 V batteries. The 4.0 Ah battery is ready for use after 25 minutes
Register to see prices 0.0 USD
Belt grinding machine Caravelle Ortho Solo 75
With integrated extraction system and pumice motor.
Heel front cone with bayonet lock, front cone Ø 90mm.
One sanding belt 40 mm, contact wheel Ø 175 mm,
belt length 1650 mm, one sanding belt 100 mm,
contact wheel Ø 100 mm, belt length 1480 mm,
suction wall diagonally recessed (orthopaedics version),
extraction capacity 1300 cubic meter /h.
Coarse and fine dust boxes removable from the front.

Dimensions WxDxH: 720 x 780 x 1550 mm
Power requirements: 400 V / 50 Hz / 2,1 kW

with cam switch and thermo-protected drive motors,
2 m power cord with CEE plug
Register to see prices 0.0 USD
Belt grinding machine HARDO Caravelle Ortho Solo 115
- Orthopaedic sanding machine
- Enlarged work-space left, without trimmers
- Integrated extraction system with cotton filter
- Suction wall placed back widely
- Removable suction nozzles n Heel breaster on bajonet
- Sanding belts 1× 40×Ø175 + 1×100×Ø100 mm
- Separate belt control
- Suction flap activation controlled by each respective drive
- Sanding wheel on bajonet
- Pneumatic sanding belt tensioning
- Fully automatic filter cleaning
- Additional fine dust filter incl.
- Naumkeag multi-adjustable
- Operation by double push buttons
- Ergonomic HARDO Design
- Colour: light grey RAL 7035
- Electr. specifications: 400V/3Ph/50Hz/3,2kW
- Dimensions: 1150×780×1855 mm (w×d×h)
- Weight: 280 kg
Register to see prices 0.0 USD
Belt grinding machine, width=75mm
Length approx: 1070 mm
Width/depth approx: 340 mm
Height approx: 950 mm
Weight approx: 72 kg
Supply voltage: 230 V
Mains frequency: 50 Hz
Extraction duct nominal width outside: 2 x 100 mm
Emissions sound pressure level at workstation Lp (idling without extraction unit): 87 dB(A)
Max. sanding width: 75 mm
Sanding belt length: 2000 mm
Sanding belt width: 75 mm
Circumferential belt speed(s): 29 m/s
Contact wheel diameter: 200 mm
Register to see prices 0.0 USD
Belt sander
Effective sanding height of 450 mm, pneumatic belt tension, light strip on sanding belt, integrated floor extraction, extraction on sanding belt, continuous speed control, incl. 649G60=2175X320 sanding belt
Electrical connection in V/Hz/kW 1x 230/ 50-60 / 2,2
Dimensions WxDxH 712 x 875 x 1.787 mm
Belt width 320 mm
Belt speed 6 - 16 m/s
Exhaust nozzle Ø 125 mm
Register to see prices 0.0 USD
Beltsander with 2 sanding belt, 2 speeds, 2500 x 50mm
Sander with two telescopic booms on rubber contact rollers.
Power supply: 400 Volt
Belt: 50 x 2500 mm
Weight: 140 kg
Headphones mandatory (according to DIN EN 352)

400W / 1.27kW

also referenced under: OOMAMARPDB01, CRM 91
Register to see prices 0.0 USD
Bench and Grinder Drum
Robust and stable universal grinding machines with abrasive belt and grinding wheel for a wide range of materials
Heavy, durable industrial design with maintenance-free motor
Housing made of extruded aluminum
Large, heavy mounting flanges and thus high disc concentricity
Sanding attachment with graphite coating; prevents friction and heat
Stop allows quick and easy sanding of workpieces
Tape adjustment without tools - only adjustable with a handle screw
Universal corundum grinding wheel and sanding belt in the standard scope of delivery
Register to see prices 0.0 USD
Bench machine PODO MINI
FEATURES
- Complete drive shaft with bayonet connection
- Abrasive ring diameter 100x90mm length 283mm
- Integrated vacuum cleaner and external fabric filter

MACHINE DIMENSIONS
- Width 540mm - Depth 410mm - Height 440mm - Weight 34 Kg

POWER SOURCE
- Single phase 230V - 1ph - 50Hz
Register to see prices 0.0 USD
Bench top socket router machine
Designed for Orthopedics workshops
Manual height adjustment, milling shaft horizontally and vertically
adjustable, continuous speed control, M.16 milling shaft thread, adapter from M.16

Dimension : Out Side W.50—D.50—H.40 cm
Power Supply 220 Volt 50 Hz
Power cord With CEE plug 3 × 16 A and CEE socket 3× 16 A
Sound intensity level 80 dB(A)
Electrical connection 220 V 50 Hz 1500 Watt
Motor RPM Variable rotation speed, min. 0 to max. 3000 RPM
Connecting cable 3x2,5 mm2 3 mt
Router shaft length and Type 500 mm 30 to 35 mm ( Conic 220 mm )
Suction head hose 100 mm plastic ,flexible
Scope of delivery Exhaust arm with suction hood (Ø 100 mm +hose )
Color Rall 7035 & 7045
Weight Net 42 Kg
Register to see prices 0.0 USD
Bench top socket router machine ORTHO 11S
MACHINE FEATURES
- Horizontal motor with bayonet connection
- T22 pine cone and pad supplied
- Foot switch operation
- Arrangement for connection to a centralized vacuum system
- 60 mm diameter on the side
- Suction channel adjacent to the pad

MACHINE DIMENSIONS
- Width 700mm - Depth 400mm - Height 400mm - Weight 50 Kg

POWER SUPPLY
- Single phase 230V - 1ph - 50Hz with inverter
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Bobbin for "Adler" 30-70
Dimensions WxDxH: 850 x 500 x 1140mm
Weight: 83,000kg
Max. stitch length: 5mm
Sewing speed: max. 300 stitches
Needle system: 332 L LG, 332 LG
Footprint: 1000 x 750mm
max. presser foot stroke: 12mm
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Brass piston
also referenced as: OOMAOPRECR75P, CRM 74
Register to see prices 0.0 USD
Bronze pipe cross coupling, 1/2"
also referenced under: OOMAVAPUCR10B, CRM 62
Register to see prices 0.0 USD
Bronze pipe double connector, 1/2"
also referenced under: OOMAVAPUCR10D, CRM 64
Register to see prices 0.0 USD
Bronze pipe plug, 1/2"
also referenced under: OOMAVAPUCR10P, CRM 63
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Buzzer
BE 220/240/3001

also referenced under: OOMAOVENCR50E, CRM 35
Register to see prices 0.0 USD