• Oven, Heating plate
  • Drilling, Milling, Sawing
  • Abrasive
  • Vacuum technology
  • Injection technology
  • Pressurized air system
  • Spare parts for machinery
  • Electric hand machine
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Wiltec oil-free vacuum diaphragm pump 128-135 l / min AS29
This pump is designed according to the requirements of the air conditioning systems and enables a professional evacuation of the cold air conditioning circuit.

Due to its outstanding technical characteristics and the robust design, the vacuum pump can also be used for the air-conditioning in your car.

Because of the repeated daily service work and the related cold starts, it is important for the air-conditioning technology that the vacuum pumps are reliable.

• For the mobile use for evacuating refrigeration and air conditioning circuits
• For universal use with refrigerant recovery machines and installation aids
• For evacuating the air conditioning systems from cars and commercial vehicles
• As replacement for air conditioning service units
• Ergonomic handle for the easy and safe transportation of the vacuum pump
• For minimizing the noise the vacuum pump is equipped with rubber feet
• Switch on and off directly at the vacuum pump
• oil-free and therefore maintenance free / no oil mist

Connections: 12.91 mm / 1/4 inch
Dimensions: 415x365x285mm
85x65x105mm
Debit (l/h): 8100 LITERS
Noise level db(A): ≤ 55
Cable length: 1.9 m
Vacuum: 600mm Hg
Register to see prices 0.0 USD
Wide abrasive belt sander, without tool kit
380V / 2.2 - 3kW / 1400 - 2800 rpm

also referenced under: OOMAMARPLB25, CRM 84.2
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Wet and dry vacuum cleaner, KÄRCHER NT22APTE
Powerful all-rounder with high suction power, compact construction, hose storage and accessory holder on the device. Automatic shutdown once the tank is full.
The flat pleated filter allows the water / dust suction to be switched immediately without removing the filter.
The Tact automatic filter cleaning system enables uninterrupted work, reduced maintenance costs and a long filter life.
The central control button allows you to switch from one suction program to the other.
Robust 30 liter tank with bumpers and metal steering casters.
Wet / dry vacuum cleaner with electric price and automatic start for electric tools.
Adhesion resistant PES cartridge filter.
Manufacturer no .: NT22APTE
Power supply: Mains operation
Power consumption: 1'300 W
Container volume: 22 l
Nominal dimensions of fittings: 35 mm
Length: 380mm
Width: 370 mm
Height: 480 mm
Suction hose length: 1.9 m
Cable length: 6 m
Number of Engines: 1
Air volume flow: 71 l / s
Vacuum: 255 mbar
Sound level: 72 dB (A)
Automatic switch-on system: yes
Filter cleaning: ApClean semi-automatic filter cleaning
Dust class - vacuum cleaner: L
Weight: 6.1 kg
Filter systems: Cartridge filter

Register to see prices 0.0 USD
Welding nozzle holder, ø21.8mm, ø5mm
also referenced under: OOMAOWELHJ02, 107.144
Register to see prices 0.0 USD
Welding nozzle holder ⌀32mm
also referenced under: OOMAOWELPR02, CRM 3, 100.303
Register to see prices 0.0 USD
Welding mirror, ∅280mm
Welding mirror with Teflon coating and automatic temperature control. Suitable for indoor and outdoor use.

Diameter: 280mm
Weight: 3.0kg
Power consumption: 900 Watts / 230 Volts 50 Hz
Design: straight
Includes device stand.

also referenced under: OOMAOWELPR28, CRM 7, BARY A-2
Register to see prices 0.0 USD
Welding mirror, ∅190mm
230V/500W
High-end quality made in Switzerland
Register to see prices 0.0 USD
Welding mirror, ø135mm
for LEISTER TRIAC
Register to see prices 0.0 USD
Welding gun, LEISTER, TRIAC ST
The TRIAC ST from Leister is a handy heat gun, primarily used as a profiling tool for welding and processing plastic membranes. Additionally, it is used for professional welding, shrinking and molding various thermoplastics. The two-sided air filters of the TRIAC ST can be easily removed and cleaned. This ensures an optimal air supply and maximum performance. As a successor of the TRIAC S, the ST combines a new, highly robust engine with current technology and modern design in a handy heat gun.

Compared to the design of other heat guns, the proven bar-style heat gun enables welding above the head, on the floor and in narrow areas. The ergonomic, two-component handle and its optimized center of gravity provide an ideal grip, even for longer periods of use and under difficult conditions. When in use, the actively cooled, protective tube ensures continuous safety by protecting against burns. The carbon brake also protects the heat gun from overloading. The extensive range of accessories with over 80 attachment nozzles practically make this heat gun a universal device. The TRIAC ST is already the seventh generation of Leister’s revolutionary line of TRIAC hot air tools. Decades of experience packaged in a modern design, manufactured with Swiss quality: The TRIAC ST is a robust and reliable tool.

VOLTAGE: 100 - 230 V
FREQUENCY: 60 Hz; 50/60 Hz
POWER: 1500 - 1600 W
TEMPERATURE: 40 - 700 °C
AIR FLOW (20°C): 240 l/min
TEMPERATURE SETTING STEPLESS: Yes
STATIC PRESSURE: 3000 Pa
NOISE EMISSION LEVEL: 67 dB (A)
OUTDOOR USE: Yes
DISPLAY: No
ECO MODE: No
E-DRIVE: No
NOZZLE CONNECTION Ø: 31.5 mm / 1.25 in; M14
LENGTH: 338.0 mm
DEVICE DIAMETER: 90 mm
HANDLE DIAMETER: 56 mm
WEIGHT: 0.99 kg
PLUG: KR, 2 poles, 16A; CN, 2 poles, 10A; EU, 2 poles, 16A; JP, 3 poles, 20A; CEE yellow, 3 poles, 16A; JP, 2 poles, 15A; AU, 3 poles, 10A; UK, 3 poles, 13A; US, 2 poles, 15A, polarized; CH T11, 2 poles, 10A
POWER CABLE LENGTH: 3.0 m
CONFORMITY MARK: CE
SAFETY MARK: KCC; S+; UL
PROTECTION CLASS: II

also referenced under: OOMAOWELAIRT, CRM 1, 141.311
Register to see prices 0.0 USD
Welding gun, LEISTER, TRIAC AT
- Closed-loop controlled temperature
- Open loop controlled air volume
- Intelligent «e-Drive» operating unit
- Ergonomic handling
- Modern design/ Swiss made
Power W: 1600
Voltage V~: 230
Temperature °C: 45 - 620
Air volume (20°C) l/min: 160 - 240
Size (L x ∅) mm: 335 × 90
Handle ∅ mm: 56
Weight kg: 1
Register to see prices 0.0 USD
Welding gun, LEISTER, SOLANO AT
- 100% Swiss made quality
- 60 years of expertise in making hot-air tools – brought together in the new SOLANO AT
- The sturdy, professional hot-air tool that weighs less than 1 kg/2.18 lbs
- Functional design: two-component handle grip and optimum center of gravity ensure ergonomic working
- Quick clean air filters
- Automatic carbon stop (collector protection) and heating element protection
Voltage V ~: 230
Power W: 2300
Temperature ° C: 500–650
Air quantity (20 ° C) l / min: 240
Dimensions (L × ∅) mm: 270 x 270 x 75 (45)
Weight: 750gr
Register to see prices 0.0 USD
Welding gun, LEISTER, Hot-Jet S
• 100% Swiss made quality
• Leister's smallest manual device
• Continuous electronic temperature control
• Continuous electronic adjustment of the air flow
• Quiet
• Integrated flexible foot
Voltage V ~: 230
Power W: 460
Temperature ° C: 40-600
Air flow (20 ° C) l / min: 40/110
Dimensions (L × ∅) mm: 235 x 70
Weight: 400gr

also referenced under: OOMAOWELHJ01, CRM 1.0, 100.688
Register to see prices 0.0 USD
Washer M8, 100pc
Stainless Steel
Register to see prices 0.0 USD
Washer M6, 100pcs
Stainless Steel
Register to see prices 0.0 USD
Washer M5, 100pcs
Stainless Steel
Register to see prices 0.0 USD
Washer M4, 100pcs
Stainless Steel
Register to see prices 0.0 USD
Washer M10, 100pcs
Stainless Steel
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Vacuum-Pump TLV25 HV-II
400V, 1.2kW, volume 25m³ / h, 25L tank
Register to see prices 0.0 USD
Vacuum-Pump TLV 40-HV II
400V, 1.2kW, volume 40m³ / h, 25L tank
Register to see prices 0.0 USD
Vacuum-Pump 528 LC
230V, Volume 6, m³/h, Vacuum 60mbar
Register to see prices 0.0 USD
Vacuum unit, Vacumat type 340
- vacuum unit for the manufacturing of thin-walled cast resin laminates and thermoplastic deep-drawing works

Features:
- 2 separate, electronically infinitely adjustable vacuum units with pressure gauge
- 4 connections for resin lamination
- 2 connections for deep drawing
- 2 connections for external units
- hose connection, inside Ø 6 mm
- 1,5 m power cord with grounded plug

Technical Data:
- dimensions W x D x H: 425 x 385 x 220 mm
- suction capacity: 25 l/min, approx. 80 % vacuum
- Power requirements: 220 – 230 V / 50 Hz / 1 Ph / 0.14 kW
- Special voltages upon request.
- Weight: 18 kg
Register to see prices 0.0 USD
Vacuum pump
with connection kit 121 W 312 and 2 enveloping tubes (adult 121 W 001.L + child medium 121 W 001.M), 220 Volts/750W, 0.85 to -0.1 mbar

also referenced under: OOMAVAPUCR10, CRM 56, CR 1000
Register to see prices 0.0 USD
Vacuum manometer, ⌀40mm, 1/8"
also referenced under: OOMAVAPUCR10M, CRM 65
Register to see prices 0.0 USD
Vacuum forming workstation with integrated pump
The vacuum forming workstation with integrated pump combines several functions: The system can be used for the vacuum forming and draping of plastics around the plaster model. Thanks to the compact design of the vacuum pump, which is already integrated, this workstation is particularly suitable for smaller workshops.

Dimensions WxDxH: 1000x450x1100mm
Version: Single version (vacuum pipe top and on the side)
Register to see prices 0.0 USD
Vacuum forming workstation
Dimensions WxDxH: 600 x 600 x 990 mm
Material: Steel
Vacuum connection: 13mm
Weight: 45 kg
Colour: Light grey (RAL 7035)
Scope of delivery: 704B1=140 vice, 704G11 clamping fixture "Orthofix" for exhaust tubes, 755X221 vacuum pipe with exchangeable vacuum forming plate (diameter 360 mm), ball valve, 4m hose, mounting materials for bolting to the floor
Optional accessories: 704Y30 Floor plate - Steel, galvanised, 800 x 800 x 10 mm
755X181 Foot pedal for vacuum control
Register to see prices 0.0 USD
Vacuum forming tool kit
Blister-forming Set for BK and AK prostetic socket production. The set includes a Blister-forming tray with two plates (D=320mm and D=265mm) and a vacuum-table with fitting silicone-rings and assembly material.
Register to see prices 0.0 USD
Vacupress 620S3 - UNILOCK
Type: VACUPRESS 620 S3 UNILOCK - COOL-TEC - Vacuum-Press for the orthopaedic
shoe technique / O&P field
Footprint: approx. . 0,34 qm / Bench-top version
Dimensions: H: 1050mm - W: 750mm - D: 590mm
Power supply: 400V / 50Hz / 3 Phase / other available
Capacity: 5,9 KW
Heating: 5400 W Infrared Quartz, reflector, 9 elements
Heating-time: Adjustable from 30-199 sec.,
2 LED Displays / Set-time + Remaining-time
Vacuum-pump 0,45 Kw 12 m³/h, two-stage - oil- and maintenance-free / motor protectionswitch
Airfilter: cartridge-type, high capacity
Frame dimensions: 450mm x 600 mm / vertical lift, working area raised on material level
Frame guide: 16 ball bearing, running in steel rails
Vacuum cavity: W: 140mm L: 190mm D: 190mm / integrated in working area,
standard
Frame locking: Main handle, located on the right hand side
UNILOCK mechanism: patented one handle material clamping system, self-adjusting from 0,5 up to 8,0 mm material thickness.
Activation grill: lateral moveable, ball bearing guided, additionally rotateable to th etop
(180°), vertical adjustable.
Illumination: 2 x 35W / 12V Halogen spotlight
Vacuum automatic: Standard - vacuum pump starts automatically when working frame is closed, shuts off when vacuum is reached Vacuum pressure is controlled during moulding process.
Heating automatic: Standard - The Infrared-Heating elements are controlled by an electronic
timer and shut off automatically when pre-set heating time is reached.
COOL-TEC Cooling System: Standard - Integrated cooling-system to decrease cooling period of vacuummoulded materials by use of special air jets. External compressed air supply required. Pressure is internally reduced to 1,5 bar.
Colour: structural effect paint, blue / light grey RAL 5017/7035
Register to see prices 0.0 USD
Vacupress 520 GK/2 DUAL
Vacuum-press for pairwise manufacturing of insoles and foot-orthotics. With vaccum pump

Type: Vacuum-press , Bench-top version
Frame Dim. (LxW): 520 x 350mm, gas-shock supported, frame tension adjustable
(equipped with Soft-bladder)
Vacuum-Pump: Rotary vane, oil- and maintenance-free, 6 m/h / 200mbar, vacuum-automatic controlled
Power supply: 230V / 50Hz
W 360 x D 650 x H 250 mm W 360 x D 650 x H 250 mm
Weight: 30 kgs
Register to see prices 0.0 USD
Vacupress 520 GK/2
Vacuum-press for manufacturing of insoles and foot-orthotics. With vacuum pump

Type: Vacuum-press , Bench-top version for use with external vacuum-supply
Frame Dim. (LxW): 520 x 350mm, gas-shock supported, frame tension adjustable (equipped with Soft-bladder)
Vacuum-Pump: Rotary vane, oil- and maintenance-free, 6 m/h / 200mbar, vacuum-automatic controlled
Power supply: 230V / 50Hz
W 360 x D 650 x H 250 mm
Weight 30 kgs
Register to see prices 0.0 USD
Vacupress 520 GK/1 DUAL
Vacuum-press for pairwise manufacturing of insoles and foot-orthotics. With vaccum pump

Type: Vacuum-press , Bench-top version for use with external vacuum-supply
Frame Dim. (LxW): 520 x 350mm, gas-shock supported, frame tension adjustable
(equipped with Soft-bladder)
Vacuum-Pump: Rotary vane, oil- and maintenance-free, 6 m/h / 200mbar, vacuum-automatic controlled
Power supply: 230V / 50Hz
W 360 x D 650 x H 250 mm W 360 x D 650 x H 250 mm
Weight: 30 kgs
Register to see prices 0.0 USD
Vacupress 520 GK/1
Vacuum-press for manufacturing of insoles and foot-orthotics. Without vacuum pump

Type: Vacuum-press , Bench-top version for use with external vacuum-supply
Frame Dim. (LxW): 520 x 350mm, gas-shock supported, frame tension adjustable (equipped with Soft-bladder)
Vacuum-Pump: none
Power supply: 230V / 50Hz
W 360 x D 650 x H 250 mm
Weight 21 kgs
Register to see prices 0.0 USD
Vacumat Plus type 262 vacuum unit
- for cast resin and deep-drawing processes, with two separate vacuum systems, electronically controlled with digital display, vacuum pressure continuously adjustable, with 1.5 m power cord
- 6 connections for lamination 2 connections for deep-drawing 2 connections for external units, e.g. additional tank
- 25 L/min
- 200 mbar
- 230V, 50Hz, 0.14kW
- 425x385x220mm
- 20kg
Register to see prices 0.0 USD
Universal soldering iron, angled 150W
Tough industrial soldering irons with Ersadur long−life soldering tips (30 times the working life of conventional copper soldering tips). Warm−up time 3 min. (for size 300, approx. 5 min.). Power cable 1.5 m rubber cable (PVC for size 30). With support stand (not size 30).
Powerful soldering iron for copper cables up to 6 mm2 cross section.
Soldering tip width: 5.3 mm
Heating power: 150 W
Soldering tip temperature after 3 minutes: 450 °C
suitable for copper cross sections up to: 6 mm2

also referenced under: OOMAOWELIE15, CRM 10, 0155JD
Register to see prices 0.0 USD
Universal soldering iron 30W
Technical Specifications:

Product Type: Soldering Iron
Power Supply: Mains operation
Tip Width: 3.1 mm
Heating Power: 30 W
Tip Temperature after 3 minutes: 380 °C
Suitable for copper sections up to: 2.5 mm²
Weight without power cord: 80 g
Identification and Classification Numbers:

EAN / GTIN: 4003008047004
Manufacturer's Reference: 0330KD
Description:
This industrial soldering iron is designed for exceptional longevity, equipped with Ersadur long-life tips that last 30 times longer than standard copper soldering tips. It heats up in 3 minutes, features a 1.5 m rubber power cable (ref. 30 uses PVC), and comes with a detachable iron stand (not included with ref. 30). The Ersa soldering iron also includes a clip-on iron stand for convenient and safe use.
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Timer selector knob
also referenced under: OOMAOVENCR50K, CRM 40
Register to see prices 0.0 USD
Timer
120 minutes

also referenced under: OOMAOVENCR50I, CRM 29
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Thread sealant stick Loctite 561
These sealants replace hemp, sealing tapes, and pastes, they are resistant to gases, liquids, air, water, oils, hydrocarbons and many chemical products. Complete surface contact ensures a 100% seal. Unscrewing, or correction of position during assembly can be performed using conventional tools at any time before the sealant hardens. No sealant residues to block filters and valves.
The stick with pasty sealant is economical in consumption, no drips after use.
Application:
Improved bonding of suckers.
Note:
Before applying sealant, clean the threads with general-purpose cleaner
Labelling of hazardous substances: GHS07 Caution
Content of stick: 19 g
Colour of sealant: orange
minimum break-away torque: 5.8 N·m
Temperature range: -55 °C - 150 °C
for thread size M to: M80
for imperial thread size: 3 inch
Strength for disassembly: low
fluorescent:no
Register to see prices 0.0 USD
Thermoregulator + probe
also referred as: OOMAOPRECR75T, CRM 76
Register to see prices 0.0 USD
Thermoregulator
FUNCTION: Programmer, Controller
DIMENSIONS: 48 x 48 mm
DISPLAY: 1 display with 4 digit
POWER SUPPLY: 24 Vac/Vdc, 100… 240 Vac
INPUTS: 0/1… 5 V, 0/2… 10 V, 0/4… 20 mA, Pt100, PTC-NTC, Thermocouple
OUTPUTS: Relay and/or SSR control
DIGITAL INPUTS: 1, 2
INDEPENDENT TIMER: Yes
NUMBER OF PROGRAMS / SEGMENTS: 1 program with 8 segments
INTERFACE: TTL Modbus
SPECIAL FUNCTIONS: Digital retransmission, Hours/Days worked, Power on delay, Soft start, Transmitter power supply, User calibration, Wattmeter
CONTROL: ON/OFF and PID single or double action
EXTRACTABILITY: By the front
CERTIFICATIONS: CE, UL

Specially parameterized for CR5000G

also referenced under: OOMAOVENCR50RG, CRM 46, K48
Register to see prices 0.0 USD
Thermometer, digital, with one surface feeler
also referenced under: OOMAOVENTHERDIG, CRM 53
Register to see prices 0.0 USD
Thermometer
also referenced under: OOMAOVENTERMO, CRM 47
Register to see prices 0.0 USD