• Polypropylene
  • Polyethylene
  • 3D Fabric
  • Evazote
  • Plastazote
  • Cork
Carbon sheet, 1m wide x 10m long
200gr/m2, 2x2 twill
Carbon fibers are very strong · Light weight · Reduced elongation at break · Very resistant to temperature variations. This fabric is much stronger than most metals or other fiberglass reinforced materials. This fabric is elastic, very resistant and attenuates vibrations. · The material to the aeronautical standard makes it possible to manufacture fine agglomerates but with high resistance.
Register to see prices 0.0 USD
Turbocast, for finger and wrist splints, 2x600x440, blue
Set of 3 sheets
Can be shaped easily.
Can be worked with hot water or with a heat gun.
Perfectly matches the patient's shapes.
Good weldability.
Lightweight and resistant.
Can be used on a model or directly on the patient who has been previously protected with Jersey.
> For finger and wrist splints
Register to see prices 0.0 USD
PMMA sheet, 8mm, transparent
8x2000x1000mm
Poly(methyl methacrylate) (PMMA)
Also known as acrylic, or acrylic glass
Register to see prices 0.0 USD
Turbocast, for finger and wrist splints, 3.2x600x900, beige
Can be shaped easily.
Can be worked with hot water or with a heat gun.
Perfectly matches the patient's shapes.
Good weldability.
Lightweight and resistant.
Can be used on a model or directly on the patient who has been previously protected with Jersey.
> For finger and wrist splints
Register to see prices 0.0 USD
PMMA sheet, 6mm, transparent
6x2000x1000mm
Poly(methyl methacrylate) (PMMA)
Also known as acrylic, or acrylic glass
Register to see prices 0.0 USD
Turbocast, for finger and wrist splints, 3.2x600x900, blue
Can be shaped easily.
Can be worked with hot water or with a heat gun.
Perfectly matches the patient's shapes.
Good weldability.
Lightweight and resistant.
Can be used on a model or directly on the patient who has been previously protected with Jersey.
> For finger and wrist splints
Register to see prices 0.0 USD
Lai-Porellina, 0.8mm x 50m x 11cm
Artificial leather, embossed, readily processable, very good wearing confort, no staining, not sensitive to light
Register to see prices 0.0 USD
Streifyflex® sheet, 1115x900x4mm
permanently elastic thermoforming film, moulding temp: 120-135 °C / 248-275 °F
Register to see prices 0.0 USD
Turbocast, for finger and wrist splints, 3.2x600x900, perforated, beige
Can be shaped easily.
Can be worked with hot water or with a heat gun.
Perfectly matches the patient's shapes.
Good weldability.
Lightweight and resistant.
Can be used on a model or directly on the patient who has been previously protected with Jersey.
> For finger and wrist splints
Register to see prices 0.0 USD
Turbocast, for finger and wrist splints, 2.4x600x900, perforated, beige
Can be shaped easily.
Can be worked with hot water or with a heat gun.
Perfectly matches the patient's shapes.
Good weldability.
Lightweight and resistant.
Can be used on a model or directly on the patient who has been previously protected with Jersey.
> For finger and wrist splints
Register to see prices 0.0 USD
Turbocast, for finger and wrist splints, 2.4x600x900, beige
Can be shaped easily.
Can be worked with hot water or with a heat gun.
Perfectly matches the patient's shapes.
Good weldability.
Lightweight and resistant.
Can be used on a model or directly on the patient who has been previously protected with Jersey.
> For finger and wrist splints
Register to see prices 0.0 USD
Streifyflex®, "Deep Drawing Sheeting", 4mm, clear
- ethylene vinyl acetate (EVA)
- for shoe-insoles
- for water-resistant splints and supports
- for hand (metacarpus) splints and forerarm splints
- in arm prosthetics, for foot prostheses (e. g. according to Bellmann)
- for prostheses sockets
Register to see prices 0.0 USD
Polypropylene Copolymer sheet, 6mm, natural color
6x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
Register to see prices 0.0 USD
ThermoLyn soft, 15mm
400x400x15mm
Suitable for fabricating flexible inner prosthetic sockets,
especially in lower limb prosthetics
Product information:
• Ethylene vinyl acetate
• Also in antibacterial (616T253)
• High flexibility
• High surface quality
• Can be subsequently thermoformed
• Minor shrinkage: approx. 3%
• Comfortable to wear
• Washable
• Temperature recommendation: 160 °C/320 °F
(convection oven, infrared oven)
Register to see prices 0.0 USD
Register to see prices 0.0 USD
PE sheet, 5mm, flesh
5x2000x1000mm
Register to see prices 0.0 USD
Turbocast, for finger and wrist splints, 1.6x600x900, perforated, beige
Can be shaped easily.
Can be worked with hot water or with a heat gun.
Perfectly matches the patient's shapes.
Good weldability.
Lightweight and resistant.
Can be used on a model or directly on the patient who has been previously protected with Jersey.
> For finger and wrist splints
Register to see prices 0.0 USD
Streifyflex® sheet, 1115x900x2mm, white
permanently elastic thermoforming film, moulding temp: 120-135 °C / 248-275 °F
Register to see prices 0.0 USD
Turbocast, for finger and wrist splints, 1.6x600x900, beige
Can be shaped easily.
Can be worked with hot water or with a heat gun.
Perfectly matches the patient's shapes.
Good weldability.
Lightweight and resistant.
Can be used on a model or directly on the patient who has been previously protected with Jersey.
> For finger and wrist splints
Register to see prices 0.0 USD
Polypropylene Copolymer sheet, 5mm, natural color
5x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
Register to see prices 0.0 USD
Thermoformable 3D Fabric, 6x1000x1450mm, green
Its texture allows it to breathe and to drain perspiration.
Very comfortable and soft to the touch
Easy to clean, washable at 40°C / 100°F.
Good ageing
Glue-less, this fabric complies with sustainable development policies and limits risks of allergy
Thermoformable at 170°C / 340°F.
Register to see prices 0.0 USD
Thermoformable 3D Fabric, 6x1000x1450mm, blue
Its texture allows it to breathe and to drain perspiration.
Very comfortable and soft to the touch
Easy to clean, washable at 40°C / 100°F.
Good ageing
Glue-less, this fabric complies with sustainable development policies and limits risks of allergy
Thermoformable at 170°C / 340°F.
Register to see prices 0.0 USD
Agglomerated cork 1140x860x10mm
Material:
- EVA cork-scrap sheets

Application:
- for insoles and embeddings
- for shoe last modifications

Characteristics:
- light-weight
- thermoplastic (mouldable at approx. 130 °C)
- high density
- approx. 60 Shore A
- bonds well with contact glues
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Plastazote non-perforated, skin coloured, 25mm
1000x1000x25mm, 15-18 Shore A
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Turbocast, 2x600x430mm, mini perforated, beige
Can be shaped easily.
Can be worked with hot water or with a heat gun.
Perfectly matches the patient's shapes.
Good weldability.
Lightweight and resistant.
Can be used on a model or directly on the patient who has been previously protected with Jersey.
> For finger and wrist splints
Register to see prices 0.0 USD
EVA foam material, 10mm, black
thermo-moldable at approx. 90 - 130°C., approx. 35° Shore A, 1030x1035x10mm
Register to see prices 0.0 USD
EVA (PE) foam, 10mm, terra
10x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Polypropylen Copolymer sheet, 4mm, nature
4x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
Register to see prices 0.0 USD
Streifyflex®, 14mm, translucent
14x400x400 mm, ethylene vinyl acetate (EVA), moldable approx. 130-135 ° C, suitable for flexible internal sockets, in particular for sockets above the knee
Register to see prices 0.0 USD
EVA (PE) foam, 12mm, terra
12x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
EVA (PE) foam, 12mm, olive
12x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
EVA (PE) foam, 12mm, beige
12x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
Polypropylene homopolymer sheet, 6mm, natural color
6x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
Register to see prices 0.0 USD
Plastazote non-perforated, skin coloured, 20mm
1000x1000x20mm, 15-18 Shore A
Register to see prices 0.0 USD
EVA (PE) foam, 4mm, multicolor
4x1740x960mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD
Polypropylene Copolymer sheet, 3mm, natural color
3x2000x1000mm
Polypropylene copopolymer (PPC), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
Register to see prices 0.0 USD
Polypropylene homopolymer sheet, 5mm, natural color
5x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
Register to see prices 0.0 USD
Polypropylene homopolymer sheet, 5mm, terra
5x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
Register to see prices 0.0 USD
Polypropylene homopolymer sheet, 5mm, olive
5x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
Register to see prices 0.0 USD
Polypropylene homopolymer sheet, 5mm, beige
5x2000x1000mm
Polypropylene homopolymer (PPH), Excellent thermoforming, Chemical and corrosion resistant, thermo-moldable at approx. 165°C, approx. 75° Shore D
Register to see prices 0.0 USD
Streifyflex®, 12mm, translucent
12x400x400mm, ethylene vinyl acetate (EVA), moldable at approx. 130-135 °C, suitable for flexible inner sockets, especially for above-knee sockets
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Plastazote perforated 12mm, flesh colour, 1m x 1m
1000x1000x12mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A
Register to see prices 0.0 USD
EVA (PE) foam, 4mm, beige
4x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
Register to see prices 0.0 USD