- Adapter ring, holder for suction hose, for clamping in a vice
- Structure made of square and galvanized steel tubes
- Holder for SACH* foot adapter 743Y34 Cylindrical head screw 501T3=M10X60 SACH* foot adapter with threaded connection 2R8=M10 Single-channel suction hose 755R90, dimensions WxDxH 42 x 30 x 400 mm, connection Ø 13 mm Two-channel suction hose 755R100, dimensions W x D x H 42 x 30 x 520 mm, connection Ø 6 mm
- 260 x 1,020 x 300mm, 10kg

110–240 V / 50–60 Hz
During measurement, it is possible to check the effect of joint stabilization with ground reaction forces.
Thanks to the adjustment of plantar flexion under load, the precise adjustment of the medical device can be performed very quickly and in a targeted way:
- Easy transportation
- Modern and functional design
- Data logging of the exhaustive and automatic equipment
- Simplifies communication with caregivers
Tablet with help function:
- Synchronous measurement and representation of the line of force of the two legs with display of the distribution of the load
- Measurement of vertical forces just as in L.A.S.A.R. Posture
- Complete tutorials, help functions and integrated alignment recommendations
- Simplified transition to another view of the camera
- Representation of vertical and horizontal forces indicating actual load
- Screen capture function to quickly record and analyze the conditions of the measurement
- Complete patient database with instrumentation flow, comparison view and possibility of creating a PDF

1 straight and 1 angled point; nylon handle. Point hardness 48 - 55 HRC.
overall length: 230 mm
Type of product: Steel scriber

To be used for three-dimensional alignment of leg orthoses and positioning of knee and ankle joint points on a plaster negative or plaster positive.
Dimensions WxDxH: 270 x 380 x 770 mm

Robust, knurled body with interchangeable hardened tip and ergonomic tip for high user comfort. The punching power can be adjusted at will by rotating the tip.
Material (s): Special tool steel.
Total length: 110 mm
⌀ tail: 10 mm
Min impact force: 47 N
Max impact force: 78 N
Material: Special tool steel

To be used for functional plaster casting under weighted conditions
Dimensions WxDxH: 600 x 800 x 1.115 mm
Space requirements: 2,000 x 2,000 mm
Weight (net): 21 kg

for plaster casting under body load incl. base plate 145M21 and one casting ring set 145M22/S
mobile use with transport castors and -handle
space saving due to built-in folding mechanism
quick-adjustment lever provides even easier height settings of the casting apparatus in seconds
high quality, sturdy choice of material
exact adjustment options by means of crank handle

Technical data

space required: 2000 x 2000 mm
dimensions W x D x H: 900 x 600 x 1120 mm

Equipment 2x 743Y26 pressure blocks
Dimensions WxDxH 235 x 350 x 59 mm
Weight 2.8 kg
To be used for Plaster casting for hip/knee disarticulation patients

The casting table has been designed to meet the needs of all kind of prothetic patients, including lower extremity prostheses, hip and knee disarticulation prostheses.
The geared system and the ergonomic design enable the technician to adjust the height appropriately allowing the patient to comfortably stand upright while the measurements are taken.

Strong octagonal shank, bright finished point. Uniformly through hardened over the entire length. Head specially annealed to prevent splintering.
Safety tested to DIN 7255.
Material: Chrome vanadium air hardening steel, painted. Head annealed.
overall length: 120 mm
Shank ⌀: 10 mm
Type of striking head: annealed
Material: Chrome vanadium air hardening steel
Surface: painted

Sliding combination square, metric and imperial marking on ruler
Can mark 90° and 45°
Adjustable depth for repetition marking and scribing
Built in level bubble for approximate marking and a metal scriber contained in the end
Size: 300mm / 12"

Large backlit LCD display (digit height: 21 mm). Stainless steel weighing pan.
Very easy to use with 2 keys.
Taring function (accumulation of weighings) for easy reset of the display.
Battery operated, automatic shutdown after 3 minutes.
Connection of an AC adapter possible.
Maximum weighing range: 50,000 g
Reading: 20 g
Board dimensions: 320 × 260
Width: 320mm
Depth: 300mm
Height: 60mm
Power supply: Battery operated
Number of batteries included: 2
Code art. batteries included: LR6
Net weight: 2.6 kg

plastic, 6-part,
5 / 10 / 15 / 20 / 25 / 30 mm thick,
size 320 x 150 mm

Large high-contrast digital display. The measuring faces are precision-lapped.
Digital caliper with absolute scale, no zeroing required. Electronics switch off automatically after approx. 5 minutes. Simply move it to switch on.
Glass scale ensures very high accuracy.
The electronics are decoupled from the casing and incorporated directly in the sliding part. The gauging force is transmitted directly to the measurement jaws. This reduces the liability of the caliper to errors and increases the working life.
With sturdy metal casing.

Borematic quick blind hole micrometer for 3-point internal measurement. Large LCD display with 11 mm character height for clear and error-free reading. Display can be rotated 330°. The measuring probes centre the micrometer automatically in the bore and ensure easy handling. The measuring probes are adjusted without any error by a carbide cone.
Anvils of titanium-coated hardened steel.
Advantage:
Very quick measurement with high repetition accuracy due to pistol grip and constant measuring force.
Function:
Data storage button saves the measurement result (for instance in inaccessible measurement positions).
Zero point / absolute size enables zeroing at any position.
Good / Reject display for easy checking against tolerance values.
Quick adjustment for quick spanning of the distance to be measured.

Sturdy design with chamfered arms, tool steel, forged and precision ground. Riveted through joint hinge. Hardened and ground points.

Sturdy design with chamfered arms, tool steel, forged and precision ground. Riveted through joint hinge. Hardened and ground points.

Of special stainless clock spring steel with ground measuring edges. Wide version. Upper and lower edges both with mm graduations. Very easy to read due to matt surface and sharp graduation scale.
Graduations electrolytically etched. Matt non-reflective surface.

Of special stainless clock spring steel with ground measuring edges. Wide version. Upper and lower edges both with mm graduations. Very easy to read due to matt surface and sharp graduation scale.
Graduations electrolytically etched. Matt non-reflective surface.

Carbide measuring surfaces finely lapped.
Measuring pin hardened and ground.
Blocking by lever.
With friction clutch and insulation.
With graduation of quality.
Metrology: Analogue / Packaging: Robust box / Standard: DIN 863 / ⌀ Spindle: 6.5 mm / Reading: 0.01 mm / Calibration: B1 / Measuring range: 0 mm - 25 mm / Micrometer scale: 1/50 mm / ⌀ micrometer drum: 18 mm

For Range of Motion (ROM) measurements of metacarpal, phalangeal and interphalangeal joints. Linear inch and centimeter markings on both sides of protractor in opposite directions. Protractor measures 0 degree to 150 degree in 5 degree increments.

Of stainless spring steel strip.
Clean electrolytically applied black graduations and figures with a smooth surface. Easy to read. Rounded edges to prevent injuries.
Upper and lower edges both with 1 mm graduations.

Of stainless spring steel strip.
Clean electrolytically applied black graduations and figures with a smooth surface. Easy to read. Rounded edges to prevent injuries.
Upper and lower edges both with 1 mm graduations.

Of stainless spring steel strip.
Clean electrolytically applied black graduations and figures with a smooth surface. Easy to read. Rounded edges to prevent injuries.
Upper and lower edges both with 1 mm graduations.

Of stainless spring steel strip.
Clean electrolytically applied black graduations and figures with a smooth surface. Easy to read. Rounded edges to prevent injuries.
Upper and lower edges both with 1 mm graduations.

Of stainless spring steel strip.
Clean electrolytically applied black graduations and figures with a smooth surface. Easy to read. Rounded edges to prevent injuries.
Upper and lower edges both with 1 mm graduations.

335mm

To be used for creating a plaster negative of the foot with various heel heights and adjustable tip
lift in the forefoot area, especially appropriate for AFO, KAFO, inserts.

Scope of delivery: 1x base plate, 1x forefoot wedge, guide rods, 1/4 inch foot rest, 4x 3/4 inch height
adjustment plate, 1x 3/8 inch height adjustment plate, 1x 1/4 inch height
adjustment plate

Very soft foam suitable even for children’s feet, with the best reproduction of contours.
- No crumbling
- Special German quality with great shape retention upon plaster pour
- No dusting even after a long period

Professional-quality Goniometer feature clearly marked degree increments and easy-to-read inch and centimeter linear measurements.
Has two 180 degrees scales that read in opposite directions. 14" long. Scales marked in 10 increments. Non-locking friction arm.

Automatically levelling graticule laser with vertical and horizontal laser line. The laser lines can be switched individually and together form crossing lines. In addition, the laser is equipped with a laser spot. The laser beam is easily visible in daylight and can be mounted on a stand. In addition, the pendulum system can be locked for transportation.
Scope of delivery includes: 1 graticule laser, 1 tripod stand, 1 protective pouch and 3 5V LR06 Mignon (AA) batteries.
Specifications
Dimensions LxWxH: 110 x 60 x 95 mm
Power supply: 3 x Mignon (AA)
Wavelength: 635 (Laser class 2) nm
Output power: < 1 mW
Leveling speed: < 5 sec.
Automatic leveling range: 5 degrees
Connection thread: W 1/4"
Laser light color: Red
Projection range of laser light: max. 10 m

The heel height measuring device comes with an integrated database for storing user data and orders, a multilingual display (DE, EN, NL, FR) with backlight, colour touchscreen with measurements in cm, mm or inches as well as a sturdy and easy-to-clean lower plate with crosshairs to help you position measuring objects precisely. Straightforward zero point calibration (alternative: using the lower plate(s) as the reference point).
Dimensions WxDxH: 500 x 400 x 600 mm
Electrical connection in V/Hz/kW: 1 x 230 / 50–60 / 0.1
Colour: light grey [RAL 7035]
Material: Steel, stainless steel, aluminium
Type of Planning and Equipment: Orthopedic Shoe Technology and Leather Processing

Equipment:
Quick-action clamping device, two inflatable clamping devices for attaching sockets, holder for knee joint adapter inserts, integrated measuring accessories, e.g. mm rulers, goniometers, height-adjustable footplate, TT and TF alignment pads. To be used for bench alignment of Ottobock modular lower limb prostheses (TF and TT) according to Ottobock alignment recommendations
Dimensions:
WxDxH 800 x 900 x 2,100 mm
31 1/2 x 35 3/8 x 82 5/8 inch
Scope of delivery:
Includes one right and one left adapter insert for Ottobock knee joints (adapter insert article numbers: 743Y579, 743Y580, 743Y581, 743Y582, 743Y583, 743Y584, 743Y608, 743Y629, 743Y681)

The compromise center of rotation for accurate location of orthosis joints based on Nietert can be marked directly on the leg. The a-p knee width is divided by the proportion 60:40 at a distance of 25 mm above the gap between tibia and femur.

Bosch Quigo, working area : 10 m

Boîtier en plastique avec clip-ceinture amovible. Rembobinage automatique amorti et blocage du ruban. Crochet terminal mobile, CRM 391

Automatic blocking of the ribbon during stretching.
Rewinding the ribbon by pressing the button.
Mobile terminal hook.
Yellow tape measure, printed black / red, acrylic coating for better resistance to abrasion.
Case dimensions: 52x49x22mm
Ribbon length: 2m
Band width: 13mm

Voltage tester, Cap square 150X100mm, Straight carbide tracing point, Steel rulers 300mm, Calipers 150mm, Measuring tapes: 2,5 meters, Laser meter, Bubble levels, Plastic folding rule, Lid tray , Plastic transport box

fixing of round and angular one- and two-way suction tubes and of diverse
plaster model rods possible up to 35 mm
fixing of the prosthetic socket can be done either with the tude adapter or
with the S.A.C.H.-Foot Adapter
horizontal shifting of the upper and lower fixing by 50 mm each is possible
in order to transfer extreme socket positions
firmly integrated, easily readable height scale (900 mm)
high quality, durable materials
stepplessly rotatable by 360° degrees via wing screw
For video of user's manual : https://www.youtube.com/watch?v=hVbUbQwMsiY

Equipment:
Quick-action clamping device, two inflatable clamping devices for attaching sockets, holder for knee joint adapter inserts, integrated measuring accessories, e.g. mm rulers, goniometers, height-adjustable footplate, TT and TF alignment pads. To be used for bench alignment of Ottobock modular lower limb prostheses (TF and TT) according to Ottobock alignment recommendations
Dimensions:
WxDxH 800 x 900 x 2,100 mm
31 1/2 x 35 3/8 x 82 5/8 inch
Scope of delivery:
Includes one right and one left adapter insert for Ottobock knee joints (adapter insert article numbers: 743Y579, 743Y580, 743Y581, 743Y582, 743Y583, 743Y584, 743Y608, 743Y629, 743Y681)

aluminium, to determine pelvic alignment