• Hammers
  • Abrasive
  • Knives
  • Orthopedic tools
  • Scissors
  • Scewdrivers
  • Pliers
  • Wrenches
  • Files, Rasps
  • Saws
  • Drill bit
  • Measuring tools
Socket set 1/2 inch square drive 23 pieces
Presentation in: Steel case
Length: 445 mm
Width: 187mm
Height: 51 mm
Number of rooms: 23
Hex key openings range: 10-34 mm
Drive profile: Hex socket wrench
Drive square: 1/2 inch
Register to see prices 0.0 USD
Combination spanner set 16pc
Drop forged. With close tolerance jaw width.
With oval shaft. Chrome vanadium steel, chrome-plated.
Register to see prices 0.0 USD
Hexagon screwdriver set with T-handle, 8pcs
Comfortable multi-component plastic T-handle. Blade made of chrome vanadium steel, chrome-plated.
Register to see prices 0.0 USD
Swivel end socket spanner 17 mm
The slideable T-handle is fitted with an end-stop to ensure it does not slide out.
With swivel jointed head (torsion drive 50°, swing drive up to 90°). The swivel angle is secured by an integral spring.
Material: Chrome vanadium steel, chrome-plated.
Drive profile: Hexagon socket
Wrench length: 450 mm
Width across flats: 17 mm
Length of sliding handle: 200 mm
Register to see prices 0.0 USD
Open ended spanner set 6-32mm, 12pc
Execution:
Forged. With tight tolerance openings.
With oval body.
Standard:
DIN 3110 / ISO 3318.
Material (s):
Chrome vanadium steel, chrome plated.
Delivery:
1 open-end wrench each: Ref. 6 × 7; 8 × 9; 10 × 11; 12 × 13; 14 × 15; 16 × 17; 18 × 19; 20 × 22; 21 × 23; 24 × 26; 27 × 32; 30 × 34
Register to see prices 0.0 USD
Hexagon key L-wrench spherical set 8pc
L-form shaft; ball point can be applied up to an angle of 30°.
PB Swiss Tools special steel combining maximum hardness with exceptional toughness. Surface nickel-plated and chrome-plated, edges slightly chamfered.
Content:
1 each L-wrench: Size 1.5; 2; 2.5; 3; 4; 5; 6; 8
Presented in: Plastic clip
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Torx® key L-wrench set, with retainer function 9pcs
The tapered Torx® HF profile reliably retains all Torx® screws. L-shank; through hardened (hard and tough).
Ideal for starting and tightening Torx® screws where access is difficult.
Material: Chrome vanadium steel, manganese phosphated.
Supplied with table use:
1 each L-wrench in a plastic clip: TX8; TX9; TX10; TX15; TX20; TX25; TX27; TX30; TX40
Register to see prices 0.0 USD
Adjustable wrench 300mm
Narrow shape with profiled body in double T (chrome). 22 ° jaw position. Forged and hardened. With graduation on the jaws.
Maximum opening: 34mm
Total length: 300mm
Register to see prices 0.0 USD
Hexagonal screwdriver, extra long, with cross handle SET
Comfortable multi-material cross handle made of plastic. Chrome-vanadium steel blade, chrome-plated.
SET of : 6, 8, 10mm
Blade length: 350mm
Total length: 385mm
Register to see prices 0.0 USD
Extension, 3/8 inch extra long, 305mm
Square drive: 3/8 in
Total length: 305mm
Register to see prices 0.0 USD
Hexagon key L-wrench spherical set 9pc
Chrome vanadium steel, through hardened (toughened), surface manganese phosphated.
L-form shaft; ball point can be applied up to an angle of 30°.
Stored in: Plastic clip
1 each L-wrench: Size 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm
Register to see prices 0.0 USD
Adjustable wrench 200mm
Narrow shape with profiled body in double T (chrome). 22 ° jaw position. Forged and hardened. With graduation on the jaws.
Maximum opening: 30mm
Total length: 250mm
Register to see prices 0.0 USD
Hexagon screwdriver set with T-handle, 6 pcs
Comfortable multi-component plastic T-handle. Blade made of chrome vanadium steel, chrome-plated.
Register to see prices 0.0 USD
Hexagon screwdriver with T-handle 10 mm
Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.
Register to see prices 0.0 USD
Adjustable wrench 200mm
Narrow shape with profiled body in double T (chrome). 22 ° jaw position. Forged and hardened. With graduation on the jaws.
Maximum opening: 24mm
Total length: 200mm
Register to see prices 0.0 USD
Hexagon key L-wrench set in foldable holder, 7pcs
Handy holder in fiber-reinforced plastic with release button.
Contents:
1 spanner each: 2; 2.5; 3; 4; 5; 6; 8 mm
Register to see prices 0.0 USD
Nut spinner with T-handle, blade length 125 mm 17 mm
Ergonomically shaped T-handle with easy-grip Santoprene® surface and an impact resistant plastic core. Blade of chrome vanadium special steel. Surface chrome-plated.
Impact resistant plastic T-handle. Blade of special vanadium steel, surface matt chrome-plated.
Register to see prices 0.0 USD
Adjustable wrench 150mm
Narrow shape with profiled body in double T (chrome). 22 ° jaw position. Forged and hardened. With graduation on the jaws.
Maximum opening: 19mm
Total length: 150mm
Register to see prices 0.0 USD
Hexagon screwdriver with T-handle 8 mm
Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.
Register to see prices 0.0 USD
Adjustable wrench 100mm
Narrow shape with profiled body in double T (chrome). 22 ° jaw position. Forged and hardened. With graduation on the jaws.
Maximum opening: 13mm
Total length: 100mm
Register to see prices 0.0 USD
Hexagon key L-wrench set 9pc
L-form shaft to DIN ISO 2936 L, end faces squared and chamfered. Chrome vanadium steel, through hardened (toughened).
Surface manganese phosphated.
1 each L-wrench No. 626125: Size 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10
Storage in: Plastic clip
Register to see prices 0.0 USD
Hexagon screwdriver with T-handle 6 mm
Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.
Register to see prices 0.0 USD
T-handle, 3/8 inch 200 mm
Square drive: 3/8 in
Total length: 200mm
Register to see prices 0.0 USD
Hexagonal screwdriver, extra long, with cross handle 10mm
Comfortable multi-material cross handle made of plastic. Chrome-vanadium steel blade, chrome-plated.
Hexagonal: 10mm
Blade length: 350mm
Total length: 385mm

Register to see prices 0.0 USD
Nut spinner with T-handle, blade length 125 mm 11 mm
Ergonomically shaped T-handle with easy-grip Santoprene® surface and an impact resistant plastic core. Blade of chrome vanadium special steel. Surface chrome-plated.
Impact resistant plastic T-handle. Blade of special vanadium steel, surface matt chrome-plated.
Register to see prices 0.0 USD
Hexagon screwdriver with T-handle 5 mm
Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.
Register to see prices 0.0 USD
Adjustable caliper pin wrench flat 3mm
Special steel drive head ground, hardened and burnished; with fixed pins.
Application: For twin hole nuts.
Note: Pin ⌀ = pin nominal ⌀ - 0.1 mm; tolerance field h12.
Pin spacing adjustable: 11mm - 60mm
overall length: 160mm
Register to see prices 0.0 USD
Adjustable caliper pin wrench flat 2mm
Special steel drive head ground, hardened and burnished; with fixed pins.
Application: For twin hole nuts.
Note: Pin ⌀ = pin nominal ⌀ - 0.1 mm; tolerance field h12.
Pin spacing adjustable: 7 mm - 40 mm
overall length: 115 mm
Register to see prices 0.0 USD
Nut spinner with T-handle, blade length 125 mm 10 mm
Ergonomically shaped T-handle with easy-grip Santoprene® surface and an impact resistant plastic core. Blade of chrome vanadium special steel. Surface chrome-plated.
Impact resistant plastic T-handle. Blade of special vanadium steel, surface matt chrome-plated.
Register to see prices 0.0 USD
Hexagon key L-wrench set nickel-plated 7pcs
In plastic clip.
L-form shaft to DIN 911/DIN ISO 2936, chromium-vanadium steel, end faces squared and milled.
Content table use: 1 pc. each screwdriver Size 2; 2.5; 3; 4; 5; 6; 8
Register to see prices 0.0 USD
Nut driver, for hexagonal nut, 10mm
Multi-material handle with optimized grip area in terms of torque and comfort. Chrome-vanadium steel blade, chrome-plated
Register to see prices 0.0 USD
Hexagon screwdriver with T-handle 4 mm
Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.
Register to see prices 0.0 USD
Hexagonal screwdriver, extra long, with cross handle 8mm
Comfortable multi-material cross handle made of plastic. Chrome-vanadium steel blade, chrome-plated.
Hexagonal: 8mm
Blade length: 350 mm
Total length: 382 mm

Register to see prices 0.0 USD
Nut spinner with T-handle, blade length 125 mm, 6mm
Ergonomically shaped T-handle with easy-grip Santoprene® surface and an impact resistant plastic core. Blade of chrome vanadium special steel. Surface chrome-plated.
Impact resistant plastic T-handle. Blade of special vanadium steel, surface matt chrome-plated.
Register to see prices 0.0 USD
Hexagonal screwdriver, extra long, with cross handle 6mm
Comfortable multi-material cross handle made of plastic. Chrome-vanadium steel blade, chrome-plated.
Hexagonal: 6mm
Blade length: 350 mm
Total length: 382 mm

Register to see prices 0.0 USD
Offset screwdriver for Phillips 1-2
Two cross-head profiles of different sizes, with 90° offset blades. Vanadium-molybdenum steel. Handle made of high quality impact resistant plastic.
Register to see prices 0.0 USD
Nut spinner with precision screw grip Kraftform Micro 4 mm
Multi-component power handle with grip zone optimised for torque and comfort. Blade made of chrome vanadium steel, chrome-plated.
With Kraftform Micro multi-element precision screw grip and revolving centre cap.
Width across flats: 3 mm
overall length: 157 mm
Blade length: 60 mm
Register to see prices 0.0 USD
Nut driver, for hexagonal nut, 6mm
Multi-material handle with optimized grip area in terms of torque and comfort. Chrome-vanadium steel blade, chrome-plated
Register to see prices 0.0 USD
Nut driver, for hexagonal nut, 5,5mm
Multi-material handle with optimized grip area in terms of torque and comfort. Chrome-vanadium steel blade, chrome-plated
Register to see prices 0.0 USD
Nut spinner with precision screw grip Kraftform Micro 3 mm
Multi-component power handle with grip zone optimised for torque and comfort. Blade made of chrome vanadium steel, chrome-plated.
With Kraftform Micro multi-element precision screw grip and revolving centre cap.
Width across flats: 3 mm
overall length: 157 mm
Blade length: 60 mm
Register to see prices 0.0 USD
Nut driver, for hexagonal nut, 4mm
Multi-material handle with optimized grip area in terms of torque and comfort. Chrome-vanadium steel blade, chrome-plated
Register to see prices 0.0 USD
Hexagon screwdriver with T-handle 3 mm
Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.
Register to see prices 0.0 USD
Hexagon screwdriver with T-handle 2.5 mm
Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.
Register to see prices 0.0 USD
Combination spanner 17 mm
Forged by stamping. With opening to tight tolerances
Register to see prices 0.0 USD
Hexagon screwdriver with T-handle 2 mm
Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.
Register to see prices 0.0 USD
Hexagon key L-wrench spherical, 6mm
Elbow body; optimized lengths. Maximum hardness while being particularly tenacious thanks to the special PB Swiss Tools alloy.
With ball head that can be used obliquely up to an inclination of 30 °. Chrome-plated surface on nickel.
Register to see prices 0.0 USD
Hexagon key L-wrench spherical, 5mm
Elbow body; optimized lengths. Maximum hardness while being particularly tenacious thanks to the special PB Swiss Tools alloy.
With ball head that can be used obliquely up to an inclination of 30 °. Chrome-plated surface on nickel.
Register to see prices 0.0 USD
Hexagon key L-wrench spherical, 4mm
Elbow body; optimized lengths. Maximum hardness while being particularly tenacious thanks to the special PB Swiss Tools alloy.
With ball head that can be used obliquely up to an inclination of 30 °. Chrome-plated surface on nickel.
Register to see prices 0.0 USD
Hexagon key L-wrench spherical, 3mm
Elbow body; optimized lengths. Maximum hardness while being particularly tenacious thanks to the special PB Swiss Tools alloy.
With ball head that can be used obliquely up to an inclination of 30 °. Chrome-plated surface on nickel.
Register to see prices 0.0 USD