• Hammers
  • Abrasive
  • Knives
  • Orthopedic tools
  • Scissors
  • Scewdrivers
  • Pliers
  • Wrenches
  • Files, Rasps
  • Saws
  • Drill bit
  • Measuring tools
Rivet snap setter 3mm
Octagonal body, uncoated head
Register to see prices 0.0 USD
Rivet snap setter 4 mm
Octagonal body, uncoated head
Register to see prices 0.0 USD
Spatula, 30mm, wooden handle
Elastic paddle in stainless steel strip, flat ovoid wooden handle.
Register to see prices 0.0 USD
Rivet snap closer 3mm
Octagonal body, uncoated head
Register to see prices 0.0 USD
Rivet snap closer 4mm
Octagonal body, uncoated head
Register to see prices 0.0 USD
Plaster mixing bowl
diam. 125mm, 0.5l
Register to see prices 0.0 USD
Flat cold chisel 18x125mm
Made of flat-oval steel, hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering.
Register to see prices 0.0 USD
Plaster spatula, 16mm
made of premium steel, with round, curved and plastic-coated shank, flexible blades, polished
Register to see prices 0.0 USD
Plaster spatula, 20mm
made of premium steel, with round, curved and plastic-coated shank, flexible blades, polished
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Flat cold chisel 21x175mm
Made of flat-oval steel, hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering.
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Plaster bucket, plastic, 20l
Plastic bucket, sturdy model. With graduation and heavy metal handle.
Register to see prices 0.0 USD
Cross-cut cold chisel special quality, 4x120mm
Fully hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering. Special quality, i.e. highest possible tip hardness (approx. 59 HRC) with exceptional toughness.
Chrome vanadium special alloy. Surface chrome-plated.
Register to see prices 0.0 USD
Flat cold chisel 25x250mm
Made of flat-oval steel, hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering.
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Plaster mixer ⌀100X600mm
Mixer for paints and coatings. Mixer with hexagon profile for clamping in a mandrel.
Up to 20 kg, 10 mm hexagon
Register to see prices 0.0 USD
Cross-cut cold chisel special quality, 5x130mm
Fully hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering. Special quality, i.e. highest possible tip hardness (approx. 59 HRC) with exceptional toughness.
Chrome vanadium special alloy. Surface chrome-plated.
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Plasticine clay
For preparing models
For forming temporary dummies when there is no direct resin contact
Easily formable
Easy to apply, even on larger surfaces
Register to see prices 0.0 USD
Rivet snap setter set in a plastic clip 5pc
Octagonal shank, bright finished head. Head specially annealed to prevent splintering.
Chrome vanadium air hardened steel, painted surface.
1 each rivet snap setter: Size 2; 3; 4; 5; 6
Register to see prices 0.0 USD
Pin punch set
Sturdy octagonal shank with cylindrical shaft. Uniformly through hardened over the entire length. Head specially annealed to prevent splintering. Actual ⌀ 0.05 - 0.5 mm less than nominal ⌀, prevents the pin punch jamming in the hole.
Standard quality of chrome vanadium air hardening steel, painted.
1 each pin punch: 2; 3; 4; 5; 6; 8 mm
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Rivet header set in a plastic clip 5pc
Octagonal body, uncoated head. The special treatment of the head prevents splinters
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Chisel and taper pin punch, 6pc
Flat cold chisel: 1 pc. each 125; 150 mm
Cross-cut cold chisel: 1 pc. 125 mm
Taper pin punch: 1 pc. each size 120×2; 150×3 mm
Centre punch: 1 pc. 120×4 mm
Register to see prices 0.0 USD
Set of measuring jugs, 3pcs
Measuring jug set of transparent polypropylene, resistant to oil and acid. Scale with ml divisions, ergonomic handle, stackable.
Supplied with:
1 measuring jug 0.5 litre, scale division 10 ml.
1 measuring jug 1.0 litre, scale division 10 ml.
1 measuring jug 2.0litre, scale division 20 ml.
Register to see prices 0.0 USD
Whisk, 500mm
Wire thickness: 2.4mm, 8 wires
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Firmer Gouge 16 mm
with flattened whitish booklet, tungsten-vanadium steel
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Contouring instrument 6-8mm
with straight jaws
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Contouring instrument 6-8mm
with round jaws
Register to see prices 0.0 USD
Contouring instrument 4-6mm
with round jaws
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Contouring instrument 7-9mm
with round jaws
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Set of 3 anvils for riveting bar
1 flat, 1 concave, 1 convex
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Wad punch set complete in a case 3-20 mm
2-component holder (up to size 3-20) with pistol handle with exchangeable precision ground punch cutters. For the production of gaskets two punch cutters of different ⌀ are inserted together in the holder.
For punching or manufacturing discs / rings in one operation. For rubber, leather, felt, plastic, cork, fabric or similar materials.
1× each punching tool ⌀: 10 pcs.
size 3; 4; 6; 8; 10; 12; 14; 16; 18; 20
Available combinations of punches inner : outer (mm): 3−10 inner with 12−20 outer
Container length×width×height (mm): Plastic 140×100×40
Use an underlay of wood, leather etc. when punching to avoid damage.
The following combinations are not possible: 20 (inner) with 22 (outer); 30 (inner) with 32 (outer); 40 (inner) with 42 (outer); 50 (inner) with 52 (outer).
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Wad punch set complete in a case 3-30 mm
2-component holder (up to size 3-20) with pistol handle with exchangeable precision ground punch cutters. For the production of gaskets two punch cutters of different ⌀ are inserted together in the holder.
For punching or manufacturing discs / rings in one operation. For rubber, leather, felt, plastic, cork, fabric or similar materials.
1 each circle cutter ⌀: 55−330 mm
Centring point No. 832140: 1 pc.
1× each punching tool ⌀ No. 832110: 15 pcs.
size 3; 4; 6; 8; 10; 12; 14; 16; 18; 20; 22; 24; 26; 28; 30
Available combinations of punches inner : outer (mm): 3−10 inner with 12−30 outer 12−20 inner with 22−30 outer
Container length×width×height (mm): Plastic 275×205×50
Use an underlay of wood, leather etc. when punching to avoid damage.
The following combinations are not possible: 20 (inner) with 22 (outer); 30 (inner) with 32 (outer); 40 (inner) with 42 (outer); 50 (inner) with 52 (outer).
Register to see prices 0.0 USD