• Prosthetics and Orthotics
  • Socks for stump, stockinettes and immobilization accessories
  • Walking aids devices
  • Wheelchairs
  • Equipments and consumables for workshop
Power Generator, ESE 60 IW/MS, 66kW
Automatic control panel with digital control
Terminal board (Omission with socket combination 3)
Diesel filter with water trap
Crane loading lug
The main battery switch
Hot engine parts protection
Connection for a 230 V / 16 A battery charge (only in conjunction with a socket combination)
Manual oil scavenger pump
Register to see prices 0.0 USD
Orthopaedic high-speed press, Hardo-SUPER CLASSIC
solid sheet steel construction, safety switch with timer, separate sole press with air cushion filling and toothed rack locking, separate heel press, swivel V-pressure arm, hook back-wall for holding the inner-pressure plates, separate compressed air connection with pressure reducer and pressure gauge, fully automatic compressor system, quick release for press cushion, adjustable bars on fixture device, inflation/deflation valve with reset function. Two side-mounted orthopaedics press stations, without cushion. Left: clear width 450 mm, right: clear width 300 mm, 1 set (12 pairs) inside-pressure plates

Dimensions LxPxH: 1250 x 740 x 1780 mm
Exigences d'alimentation: 400 V / 50 Hz / 0,55 kW

Weight: 250 kg
Register to see prices 0.0 USD
Hydraulic injection machine & Tools kit & spare parts
400V/3500W/9.2Amps

also referenced under: OOMAOPRECR75, CRM 71
Register to see prices 0.0 USD
Belt grinding machine HARDO Caravelle Ortho Solo 115
- Orthopaedic sanding machine
- Enlarged work-space left, without trimmers
- Integrated extraction system with cotton filter
- Suction wall placed back widely
- Removable suction nozzles n Heel breaster on bajonet
- Sanding belts 1× 40×Ø175 + 1×100×Ø100 mm
- Separate belt control
- Suction flap activation controlled by each respective drive
- Sanding wheel on bajonet
- Pneumatic sanding belt tensioning
- Fully automatic filter cleaning
- Additional fine dust filter incl.
- Naumkeag multi-adjustable
- Operation by double push buttons
- Ergonomic HARDO Design
- Colour: light grey RAL 7035
- Electr. specifications: 400V/3Ph/50Hz/3,2kW
- Dimensions: 1150×780×1855 mm (w×d×h)
- Weight: 280 kg
Register to see prices 0.0 USD
3D L.A.S.A.R. Posture
110–240 V / 50–60 Hz
During measurement, it is possible to check the effect of joint stabilization with ground reaction forces.
Thanks to the adjustment of plantar flexion under load, the precise adjustment of the medical device can be performed very quickly and in a targeted way:
- Easy transportation
- Modern and functional design
- Data logging of the exhaustive and automatic equipment
- Simplifies communication with caregivers
Tablet with help function:
- Synchronous measurement and representation of the line of force of the two legs with display of the distribution of the load
- Measurement of vertical forces just as in L.A.S.A.R. Posture
- Complete tutorials, help functions and integrated alignment recommendations
- Simplified transition to another view of the camera
- Representation of vertical and horizontal forces indicating actual load
- Screen capture function to quickly record and analyze the conditions of the measurement
- Complete patient database with instrumentation flow, comparison view and possibility of creating a PDF
Register to see prices 0.0 USD
Pre-Preg Convection oven, 1000x620x1790mm
Type: PO1800 - Convection Oven for the O&P field
Special unit, otimized for Pre-Preg processingt
Footprint: ~ 1,2 m²
Dimensions: Outisde: W 1230mm - D 920mm - H 1950mm
Inside: W 1000mm - D 620mm - H 1790mm
Housing: Moveable on 4 casters with stop, double doors with double-pane viewing
window
Three zone heating cabinet segmentation by intermediate shelf
Electr. Connection: 400V / 50Hz / 3 Phase / (16 Amp. CEE) / total capacity 10,2 kW
other voltages on request
Heating: 3x 3300W, 3x fan motor with reversing rotation diretion
Temperature sensor: either by oven or mould/material temperature
Temperature control: Microprocessor controlled, User interface with touch-panel, PID-controller
feature, Temperature infinitely adjustable 30°C to 250°C, Temperature unit
adjustable °C/°F , Timer- and Ramp-feature individually programable, graphic
trend indicator, multi-lingual user interface (DE,EN,FR,IT)
Illumination: 2 x 25 watts
Colour: Inside stainless steel, outside structural effect paint RAL 7035 light-grey,
other RAL colours available on request (surcharge)
Weight: net: 395 kgs
gross: 550 kgs (incl. crate)
Accessories: • Universal-crate for Blister-Forming frame
(width adjustable) (Art. No. 07-131)
• Blister-Forming frame D=360mm (Art. No. 07-132)
• Baumeister Pre-Preg Set for PO ovens
Register to see prices 0.0 USD
Belt sander
Effective sanding height of 450 mm, pneumatic belt tension, light strip on sanding belt, integrated floor extraction, extraction on sanding belt, continuous speed control, incl. 649G60=2175X320 sanding belt
Electrical connection in V/Hz/kW 1x 230/ 50-60 / 2,2
Dimensions WxDxH 712 x 875 x 1.787 mm
Belt width 320 mm
Belt speed 6 - 16 m/s
Exhaust nozzle Ø 125 mm
Register to see prices 0.0 USD
Lamination workstation, 1750mm
The lamination bench consists of a frame with a storage surface (grid tray), a work surface for gluing work, a vacuum control box, vacuum points and clamping devices for exhaust tubes. The bench-top cabinet firmly connected to the lamination bench includes a storage surface (grid tray), a roll holder for stockinette materials, suction slots on both sides and a connection for an external fan to extract vapours.

Dimensions WxDxH: 1,750 x 650 x 750/1,750mm
Version: 3 pc. 704G11 clamping device
Diameter of exhaust nozzle for vapour extraction: 180mm
Weight: 135,1kg
Vapour extraction volume flow: Recommended 850 m³/h
Register to see prices 0.0 USD
Oven infrared IR1303 XTR
including Rollabout Tray with integrated Blister Forming frame cradle
Heating with 24 Infrared-Quartz-Tubes, Dual-Zone switching (6/24), Temp.
measurement of the Material surface by opto-electr. IR-sensor, infinitely adjustable
from 30°C to 250°C by SPS controller with PID feature, Software build 3.0 with
maintenance info, programmable Ramp- and Timer-feature with an option to store
slowly raising heat processes, monitoring of the heating process by graphical trend,
tefloncoated (replaceable) Rollabout Tray, 4 casters with stop, height adjustable by
gas-shock (min. 820mm, max. 1050 mm), integrated Blister forming cradle, width
adjustable, retractable when not in use, vertical Frontdoor with double pane Window,
double gas-shock supported, Illum. by two 25W bulbs, colour: colour: RAL7035
(light-grey) / RAL7031 (blue-grey), net weight 360kg
Electr. Conn.: 380-400V / 50-60Hz / 3Ph+N+PE. / 11,1 kW (3 x 32A CEE)
Dim..: outside WxDxH: 1595x1770x1400 mm
inside WxDxH : 1300x1590x500 mm
Register to see prices 0.0 USD
Pre-Preg Convection oven, 1000x620x1200mm
Type: PO1200 - Convection Oven for the O&P field
Special unit, otimized for Pre-Preg processingt
Footprint: ~ 1,2 m²
Dimensions: Outisde: W 1230mm - D 920mm - H 1570mm
Inside: W 1000mm - D 620mm - H 1200mm
Housing: Moveable on 4 casters with stop, double doors with double-pane viewing
window
Three zone heating cabinet segmentation by intermediate shelf
Electr. Connection: 400V / 50Hz / 3 Phase / (16 Amp. CEE) / total capacity 10,2 kW
other voltages on request
Heating: 3x 3300W, 3x fan motor with reversing rotation diretion
Temperature sensor: either by oven or mould/material temperature
Temperature control: Microprocessor controlled, User interface with touch-panel, PID-controller
feature, Temperature infinitely adjustable 30°C to 250°C, Temperature unit
adjustable °C/°F , Timer- and Ramp-feature individually programable, graphic
trend indicator, multi-lingual user interface (DE,EN,FR,IT)
Illumination: 2 x 25 watts
Colour: Inside stainless steel, outside structural effect paint RAL 7035 light grey,
other RAL colours available on request (surcharge)
Weight: net: 283 kgs
gross: 418 kgs (incl. crate)
Accessories: • Universal-crate for Blister-Forming frame
(width adjustable) (Art. No. 07-131)
• Blister-Forming frame D=360mm (Art. No. 07-132)
• Baumeister Pre-Preg Set for PO ovens
Register to see prices 0.0 USD
Complete finishing with 6 independent motors Model ZETA
MACHINE FEATURES

Milling shaft for soles with adjustable fixed guide
Milling shaft for soles with bayonet coupling
Abrasive shaft with 2 independent belts 1650 x 40 mm
Dual-speed abrasive shaft for the three-phase model
Sandpaper advance in canvas
Low-speed waxing shaft with rotating brushes and pads, 3 colors
Adjustable polishing wheel motor
Internal wheels for easy movement
Automatic suction opening only at the used workstation. OPEN SYSTEM
Integrated LED light on abrasive belts
MACHINE DIMENSIONS

Width: 1350 mm - Depth: 770 mm - Height: 1700 mm - Weight: 450 Kg
Register to see prices 0.0 USD
Oven infrared IR1303
including Rollabout Tray with integrated Blister Forming frame cradle
Heating with 18 Infraredt-Quartz-Tubes, Dual-Zone switching (6/18), Temp.
measurement of the Material surface by opto-electr. IR-sensor, infinitely adjustable
from 30 C to 250 C by SPS controller with PID feature, Software build 3.x with
maintenance info, programmable Ramp- and Timer-feature with an option to store
slowly raising heat processes, monitoring of the heating process by graphical trend,
tefloncoated (replaceable) Rollabout Tray, 4 casters with stop, height adjustable by
gas-shock (min. 820mm, max. 1050 mm), integrated Blister forming cradle, width
adjustable, retractable when not in use, vertical Frontdoor with double pane Window,
double gas-shock supported, Illum. by two 25W bulbs, integrated Pre-Preg hose duct
at the left side,
colour: RAL7035 (light-grey) / RAL7031 (blue-grey), net weight 290kg
Electr. Conn.: 380-400V / 50-60Hz / 3Ph. / 8,5kW (CEE 3x 16Amp.)
Dim.: outside HxWxD: 1400x1595x1270 mm
inside HxWxD : 500x1300x1090 mm
Register to see prices 0.0 USD
Belt grinding machine Caravelle Ortho Solo 75
With integrated extraction system and pumice motor.
Heel front cone with bayonet lock, front cone Ø 90mm.
One sanding belt 40 mm, contact wheel Ø 175 mm,
belt length 1650 mm, one sanding belt 100 mm,
contact wheel Ø 100 mm, belt length 1480 mm,
suction wall diagonally recessed (orthopaedics version),
extraction capacity 1300 cubic meter /h.
Coarse and fine dust boxes removable from the front.

Dimensions WxDxH: 720 x 780 x 1550 mm
Power requirements: 400 V / 50 Hz / 2,1 kW

with cam switch and thermo-protected drive motors,
2 m power cord with CEE plug
Register to see prices 0.0 USD
PROS.A. Assembly
Equipment:
Quick-action clamping device, two inflatable clamping devices for attaching sockets, holder for knee joint adapter inserts, integrated measuring accessories, e.g. mm rulers, goniometers, height-adjustable footplate, TT and TF alignment pads. To be used for bench alignment of Ottobock modular lower limb prostheses (TF and TT) according to Ottobock alignment recommendations
Dimensions:
WxDxH 800 x 900 x 2,100 mm
31 1/2 x 35 3/8 x 82 5/8 inch
Scope of delivery:
Includes one right and one left adapter insert for Ottobock knee joints (adapter insert article numbers: 743Y579, 743Y580, 743Y581, 743Y582, 743Y583, 743Y584, 743Y608, 743Y629, 743Y681)
Register to see prices 0.0 USD
Silicone rolling device
1280x650x(h)1250mm
2x 1500W / 220V
Register to see prices 0.0 USD
JUMBO heating resistance oven
With roll-about tray, 220V-380V / 20kW / 50Hz, working height: 1800x1600x400mm
External dimensions: 2000x1700x500mm
Register to see prices 0.0 USD
Lamination workstation for decentralised vacuum system
Dimensions WxDxH: 1.500 x 700 x 970/1.970 mm
Volume flow: Recommended: 550 m³/h
Weight: 235,5 kg
Material: Steel/wood
Exhaust nozzle Ø: 180 mm
Scope of delivery: Connection to a vacuum system, e.g. 755E600=* vacuum system, workbench with cabinet and shelves, bench-top cabinet with roll storage and suction slots, 758Z145=10 cutting and gluing worktop with edge suction, 2 x 704G11 clamping fixture for suction pipes "Orthofix"
Register to see prices 0.0 USD
Heating oven
Suitable for deep-drawing technology with outer rings and to dry plaster models, with 2 ventilators for uniform warming of plastic sheets, with steel support frame and a storage shelf for plastic sheets, with viewing window and space-saving opening mechanism, with interior illumination and electronic heat regulation. Complete heating cabinet, inside and outside made of stainless steel with an alu sliding shelf, covered in Teflon foils blanks, on ball-bearing mounted rollers.
Delivered with spare parts for 2 years

Technical data:
Exterior dimensions W x D x H: 1450 x 1480 x 1500mm
Interior dimensions W x D x H: 1200 x 1270 x 500mm
Working surface W x D: 1100 x 1030mm
Temperature range: 30° C - 200°C
Power requirements: 400 V / 50 Hz / 4,5 kW
Weight: 280kg

also referenced under: OOMAOVENCR50G, CR5000G
Register to see prices 0.0 USD
Therapy device to apply the apply the Resistive Capacitive Diathermia
The new TRC HT is an innovative device for performing Therapeutic Resistive Capacitive Diathermy.
TRC is the new and more effective approach in diathermy for all the professional operators who are looking for something more than a traditional diathermy unit (microwaves or shortwaves).
TRC is more selective than shortwave and microwave.
Resistive Diathermy generates a deep action over bone, ligaments, tendons and muscles. It could also be used for drainage and relaxing contractions. Heat effect is generally quite important.
Capacitive Diathermy produces biological stimulation, particularly over the treated area just where the electrode has been placed. It’s athermal or a comfortable minimal heat effect.
Further to the main massage application, Resistive and Capacitive Diathermy can be also performed by placing a static applicator over the area to be treated.
All the functions are visualized on a large color LCD. In addition to the usual and traditional keys and buttons, it is possible to adjust every parameter on the touchscreen.
The versatile Windows CE operating system ensures possible upgrading.
A wide range of preset protocols with body maps is available. After a pathology is chosen, the screen will show the body parts to be treated and the unit will suggest the parameter values to set.
Free memories for entering customized protocols.
Technical Features
- frequency: 485 kHz ± 10 Hz
- emission: continuous and pulsed
- power: adjustable from 20 to 180 W
- impedance: in real time
- temperature sensor
- color touchscreen 400 x 800 pixels
- power supply: 115-230 V~ 50/60 Hz
- consumed power: 750 VA
- dimensions: 40 x 30 x 23 cm
- safety class: class I type BF according to IEC 601-1
- Directive EEC 93/42: IIb
Register to see prices 0.0 USD
Oven infrared IR1003
including Rollabout Tray with integrated Blister Forming frame cradle
Heating with 12 Infraredt-Quartz-Tubes, Temp. measurement of the Material surface by
opto-electr. IR-sensor, infinitely adjustable from 30 C to 250 C by SPS controller with
PID feature, Software build 3.x with maintenance info, programmable Ramp- and
Timer-feature with an option to store slowly raising heat processes, monitoring of the
heating process by graphical trend, tefloncoated (replaceable) Rollabout Tray, 4
casters with stop, height adjustable by gas-shock (min. 820mm, max. 1050 mm),
integrated Blister forming cradle, width adjustable, retractable when not in use, vert.
Frontdoor with double pane Window, double gas-shock supported, Illum. by two 25W bulbs,
colour: RAL7035 (light-grey), net weight 230kgs
Electr. Conn.: 400V / 50-60Hz / 3Ph. / 5,9 kW (CEE 3x 16Amp.)
Dim.: outside HxWxD: 1420x1320x970 mm
inside HxWxD : 500x1000x800 mm
Register to see prices 0.0 USD
Mobile vacuum pump with tank, 40m3/h
400V, 1.2kW, volume 40m³ / h, 25L tank
Register to see prices 0.0 USD
Device for shock wave therapy
The new E-Shock HT is an innovative device for performing extra-corporeal shock-waves therapy.

The electropneumatic system requires almost no maintenance. Usually, a simple regeneration of the applicator and a general check of the instrument itself is necessary.

The "Large-Focus" shock-wave applicator is capable to generate and transmit mid and high energy shock-waves into the different cellular layers, respecting the patient’s comfort.

All the functions are visualized on a large color LCD. In addition to the usual and traditional keys and buttons, it is possible to adjust every parameter on the touchscreen.

The versatile Windows CE operating system ensures possible upgrading.

A wide range of preset protocols with body maps is available. After a pathology is chosen, the screen will show the body parts to be treated and the unit will suggest the parameter values to set.

Free memories for entering customized protocols.

Technical Features
max. pressure: 5 bar
frequency: 1 to 15 Hz
emission mode: Large Focus
max. penetration of focus: ± 55 mm
max. penetration of shock-wave: ± 70 mm
wheeled frame
color touchscreen 400x800 pixels
power supply: 115-230 V~ 50/60 Hz
consumed power: 1000 VA
dimensions: 40 x 30 x 90 cm
safety class: class I type BF according to IEC 601-1
Directive EEC 93/42: IIb
Register to see prices 0.0 USD
Infrared oven for orthopedic technology, IR801 XTR
Stainless steel housing inside, textured paint RAL 5017 (traffic blue) contrasting color
RAL7035 (light gray) outside, surface heating with 16 infrared quartz tubes,
Temperature measurement of the material surface using an opto-electronic IR measuring head,
Programming steplessly from 30 ° C to 250 ° C via PID controller, 2-line display with
Display of target and actual temperature, quick selection button to call up 4 free
selectable temperature values, double wing door with two double glass viewing windows,
Interior lighting 4x25W, 1 insert plate with Teflon coating,
Electrical connection: 400V / 50-60Hz / 3Ph. / 7.4 kW (CEE 16 Amp.)
Dimensions: outside WxDxH: 900x1300x890 mm
Inside WxDxH: 810x1160x540 mm
Net weight: approx. 230 kg

Register to see prices 0.0 USD
Deep drawing frame, 4x
4 vacuum forming workstations with connection to a vacuum system, e.g. 755E80=* Mobile vacuum pump with tank, tank integrated in the frame, water trap, 1x shelf with grate, 1x replaceable HPME shelf for cutting and gluing, vacuum pipe holder tilts 90°, foot pedals to control the vacuum, vacuum pipes, recommended vacuum forming output 10m³ per workstation
2500x750x750mm
Register to see prices 0.0 USD
Vacupress 620S3 - UNILOCK
Type: VACUPRESS 620 S3 UNILOCK - COOL-TEC - Vacuum-Press for the orthopaedic
shoe technique / O&P field
Footprint: approx. . 0,34 qm / Bench-top version
Dimensions: H: 1050mm - W: 750mm - D: 590mm
Power supply: 400V / 50Hz / 3 Phase / other available
Capacity: 5,9 KW
Heating: 5400 W Infrared Quartz, reflector, 9 elements
Heating-time: Adjustable from 30-199 sec.,
2 LED Displays / Set-time + Remaining-time
Vacuum-pump 0,45 Kw 12 m³/h, two-stage - oil- and maintenance-free / motor protectionswitch
Airfilter: cartridge-type, high capacity
Frame dimensions: 450mm x 600 mm / vertical lift, working area raised on material level
Frame guide: 16 ball bearing, running in steel rails
Vacuum cavity: W: 140mm L: 190mm D: 190mm / integrated in working area,
standard
Frame locking: Main handle, located on the right hand side
UNILOCK mechanism: patented one handle material clamping system, self-adjusting from 0,5 up to 8,0 mm material thickness.
Activation grill: lateral moveable, ball bearing guided, additionally rotateable to th etop
(180°), vertical adjustable.
Illumination: 2 x 35W / 12V Halogen spotlight
Vacuum automatic: Standard - vacuum pump starts automatically when working frame is closed, shuts off when vacuum is reached Vacuum pressure is controlled during moulding process.
Heating automatic: Standard - The Infrared-Heating elements are controlled by an electronic
timer and shut off automatically when pre-set heating time is reached.
COOL-TEC Cooling System: Standard - Integrated cooling-system to decrease cooling period of vacuummoulded materials by use of special air jets. External compressed air supply required. Pressure is internally reduced to 1,5 bar.
Colour: structural effect paint, blue / light grey RAL 5017/7035
Register to see prices 0.0 USD
Pro-Fit 2000 socket router
The Pro-Fit 2000 features a solid steel body for smooth operation, a suction arm with fireproof suction tubing, a suction hood with a quick-change system as well as fastening materials and a safety package. The colour of the tool holder can be individually selected if desired. The standard accent colour is anthracite grey.
Electrical equipment Main safety switch, on/off button for router motor, emergency stop foot switch, 2.5 m power cord with 5x 16 A CEE plug and 5x 16 A CEE socket
Dimensions WxDxH 1,220 x 800 x 1,560 mm
Exhaust nozzle diameter 125 mm
Power cord Power cord with 5x 16 A CEE plug and 5x 16 A CEE socket
Working height 1,000 mm
Space requirements WxD 1,100 x 1,300 mm
Equipment Steel machine body, 5/8" milling shaft thread, adapter from 5/8" to M16 thread, suction hood, short and long shaft protector, exhaust nozzle for external suction system, tool set for changing the socket router cutters, tool holder
RPM milling motor one speed 3,000 rpm
Electrical connection in V/Hz/kW 3 x 400 / 50–60 / 2.2
Colour light grey [RAL 7035]
Accent colour anthracite grey [RAL 7016]
Router shaft length 395 mm
Weight 115  kg
Height adjustment No
Sound intensity level 68 dB[A]
Chip suction Connection to a central chip extraction system with a minimum air velocity of 20 m/s [exhaust nozzle diameter 125 mm]
Register to see prices 0.0 USD
Pro-Fit 1000 vario socket router
Dimensions: 865x670x1125-1525mm
Power: 0.75 kW
Voltage: 230V
Amperage: 7A
Register to see prices 0.0 USD
ADLIB 2, Pneumatic 5-bar Microprocessor Controlled Knee
More intelligent
Integrates the information of the Multi-axes G sensor and a Magnetic sensor to estimate the 3D posture of the prosthesis and the gait cadence up to a rate of 200 times per second.

Microprocessor
Microprocessor accumulates and analyzes information from the G sensor and then evaluates the user's gait pattern.

Best Control
After receiving the signals from the microprocessor, the pneumatic cylinder provides optimal resistance for recreating natural gait patterns.

5-Bar design
Provides shock absorption of the knee, and enhancing stability of the joint dramatically without knee buckling by shifts the ICR posteriorly.

More easily way for setting (New!)
Provides the Auto and Manual modes for adjusting the joint resistance. In the Auto mode, custom set the resistance patterns only by the remote controller.
Register to see prices 0.0 USD
Oven infrared
With pneumatic door
Temperature: 60° to 250°
50-60Hz, 850W
Dimensions outside: 1640x1134x1756mm
Working area: 1828x1828mm
Register to see prices 0.0 USD
Vacuum forming workstation with integrated pump
The vacuum forming workstation with integrated pump combines several functions: The system can be used for the vacuum forming and draping of plastics around the plaster model. Thanks to the compact design of the vacuum pump, which is already integrated, this workstation is particularly suitable for smaller workshops.

Dimensions WxDxH: 1000x450x1100mm
Version: Single version (vacuum pipe top and on the side)
Register to see prices 0.0 USD
YAG HT Laser Device
HEALTH: High Energy Advanced Laser THerapy

HEALTH technology represents the new and most advanced approach into the field of modern laser therapy. We are referring to special laser devices capable to transfer the delivered energy through different cellular layers into the affected areas.

The new HEALTH devices generate continuous, pulsed and super pulsed laser light to obtain bio-stimulation and heat effects, which could be non-thermal or step by step warmer.

All the functions are visualized on a large color LCD. In addition to the usual and traditional keys and buttons, it is possible to adjust every parameter on the touchscreen.

The versatile Windows CE operating system ensures possible upgrading.

A wide range of preset protocols with body maps is available for setting most important therapies into the fields of physical therapy, sports medicine, orthopedics, vascular and aesthetic medicine.

Free memories for entering customized protocols.

Technical Features
laser wavelength: 1064 nm, visible 650 nm
max. power at the source: 6 W
adjustable power from 1,5 W to 5 W
emission: continuous, pulsed and super pulsed
working modalities: manual or static diffusion
automatic calculation of energy density and application time
color touchscreen 400 x 800 pixels
laser operated by foot pedal
power supply: 115-230 V~ 50/60 Hz
consumed power: 150 VA
dimensions: 40 x 30 x 23 cm
safety class: class I type BF according to IEC 601-1
Directive EEC 93/42: IIb
Register to see prices 0.0 USD
Vapo cabine with Downflow system 1200
Equipment Connection to an external fan, air curtain, explosion-protected lighting, cabinet
Dimensions WxDxH 1,200 x 750 x 2,200 mm
Air exhaust nozzle Ø 160 mm
Electrical connection in V/Hz/kW 1x 230/ 50/ 0.071
Weight 170 kg
Colour Light grey (RAL 7035)
To be used for Mixing lamination resin, the 758F21 Security storage cabinet can be placed in the cabinet
Register to see prices 0.0 USD
Infrared-Oven IR1001 COMPACT
The new IR1001 COMPACT is of course equipped with the innovative optical temperature sensor and a con- troller of the next generation. Same as the larger Infrared-ovens the two-line PID-Controller keeps the user constantly updated of the preset and actual temperature values. The preselect feature allows the user to store four temperature settings which can be easily called up by use of a single button. A signal light informs the user when the set temperature is reached, even if he is not standing right in front of the control panel.

Technical Data: IR1001 COMPACT
Type: IR1001 COMPACT - Infrared Oven for the O&P field, Bench-top design
Footprint: approx. 1m²
Dimensions: Outside: W 1270 mm - D 920 mm - H 455 mm / Inside: W 1000 mm - D 800 mm - H 140 mm
Tray: tray movable full size on ball bearing guides, easy to remove without tools for fast teflon replacement, effective heating area: W 950 x D 750 mm
Power supply: 400V / 50/60Hz / 3 Phase / (16 Amp. CEE) / total capacity 7,7 kW, (other voltages available)
Heating: 12 Infrared-Quartz-tubes with reflector, Stand-by switch
Temperature control: opto-electronic IR-measuring unit, Measuring of the material´s surface temperature!
Temperature control: PID-Controller, infinitely variable from 30°C to 250°C
Register to see prices 0.0 USD
Socket router machine
380V, 1.25kW / 1.7kW
with dust collector
Register to see prices 0.0 USD
Infrared oven for orthopedic technology, IR803
Stainless steel housing inside, spray paint outside, Heating with 8
Infrared-Quartz-Tubes, Temperature measurement of the Material surface by
opto-electr. IR-sensor, infinitely adjustable from 30 C to 250 C by SPS controller with
PID feature, Software build 3.0 with maintenance info, programmable Ramp- and
Timer-feature with an option to store slowly raising heat processes, monitoring of the
heating process by graphical trend, Double-Frontdoor with double pane Window, 2x
25W Illum. bulb, 1x tray with teflon
colour: RAL7035 (light-grey) / RAL 7031 (blue-grey)
Electr. Conn.: 380-400V / 50-60Hz / 3Ph. / 3,7 kW (16 Amp. CEE)
Dim.: outside: WxDxH: 900x700x920 mm
inside: WxDxH : 810x580x540 mm
net weight: 133 kgs
Register to see prices 0.0 USD
Hexagonal workbench for collective work
Sheet steel drawer units. Central closure by cylinder lock. Drawers with large aluminum handle bar and label holder, extendable up to 90%. Interior with notched walls for compartmentalization of drawers.
Established load capacity / table - Maximum load per compartment distributed over the surface (on the wood): 2,000 kg
Worktop thickness: 50 mm
Established height: 850 mm
Worktop material: Beech plywood
Usable width of drawers: 490 mm
Drawer cabinet depth: 630 mm
Usable depth of drawers: 520 mm
Width of drawer unit: 600 mm

Register to see prices 0.0 USD
Pfaff post-bed high-speed sewing machine
High-speed post-bed sewing machine with post right of the needle, single needle double-stick, with needle and wheel feed and driven presser foot, curved needle plate Version B = medium
Equipped with electromagnetic thread trimmer 900/81, presser foot lift, automatic start and end lock.
Table base 106 × 50 cm with slanted base, machine tilted forwards, stable, sturdy support frame made of square steel tubing 230 V servomotor and control panel
Dimensions W x D x H: 1060 x 500 x 1300 mm
Max. stitch length: 4,5 mm
Clearance under presser foot: 7 mm
Sewing speed: 3000 Stitch/min.
Needle system: 134 R
Power requirements 230 Volt, 50 Hz., 0,370 kW
Weight 100,000 kg
Register to see prices 0.0 USD
Assembling Aid for Orthoses
To be used for three-dimensional alignment of leg orthoses and positioning of knee and ankle joint points on a plaster negative or plaster positive.
Dimensions WxDxH: 270 x 380 x 770 mm
Register to see prices 0.0 USD
Socket router machine ORTHO 22, 220V
220V, 2.5kW
2800 tr/min
110x60x150cm, 140kg

- Horizontal motor with 75x200mm abrasive pad
- M16 thread and T22 abrasive pinecone at the top of the shaft
- Foot switch operation
- Predisposition for connection to a centralized suction system
- diameter 150mm on the side
- Suction mouth behind the adjustable pad
Register to see prices 0.0 USD
Sewing machine ADLER zig zag and straight
DURKOPP ADLER class 525i zigzag machines, lockstitch, have been designed with interchangeable control cams. They are specially made for the production of decorative stitches (outlines) on made-up clothes and ladies' underwear in textile materials. These machines can be used for sewing light and medium textiles and leathers.
230V / 50/60 Hz
Delivered with:
- Table 105,110 or 120cm south 55 or 60cm
- Fixed frame
- Electronic motor
- Oil
- Accessories
Register to see prices 0.0 USD
Passive shoulder mobilization device
Fisiotek LT is a CPM used for the passive rehabilitation of the shoulder, by means of elevation and rotation movements, with the patient in sitting and lying position.

Fisiotek LT is used when whenever joint movement needs to be restored passively in both surgical and non-surgical pathologies.

The structure of the device provides great stability and precision of the movement to ensure effective recovery. The programmation of the range of motion is done electromechanically. The graphic scale on the central disc makes programming easy and intuitive.

It is possible to adjust the height of the unit. The movement can be supervised by remote control with Start & Stop. Quality mechanical parts ensure the correctness of the movement over time.

Movements carried out
elevation in flexion range: 0° - 180°
elevation in abduction: complete physiological range
internal-external rotation range: 90° - 0° - 90°
Programmable Functions
speed: min. 2°/sec. - max. 4,5°/sec
range of movement: adjustable by electromechanical limit switch
Technical Specifications
input: 12 V DC - 50/60 Hz - 4,8 W
electric safety: Class II B - standard EN 60601-1
EMC: group I Class B - standard EN 60601-1-2
CE Directive 93/42 - Class II a
weight: 35 kg
External Power Supply
input: 100 - 240 V AC - 50/60Hz - 400 mA
output: 12 V DC - 1,25 A
Register to see prices 0.0 USD
Sewing machine "Adler" 30-70, arm 470 mm, foot control
Dimensions WxDxH: 850 x 500 x 1140mm
Weight: 83,000kg
Max. stitch length: 5mm
Sewing speed: max. 300 stitches
Needle system: 332 L LG, 332 LG
Footprint: 1000 x 750mm
max. presser foot stroke: 12mm
Register to see prices 0.0 USD
Pneumatic SIT-Cast Plaster Ca. Apparatus
For attachment to the Ottobock 743A11 casting apparatus. Provides functional casting of ischial containment sockets while bearing weight. Has pneumatic pressure adjustment and a short-stroke cylinder. Pressure regulator provides individual pressure adjustment of the femoral pad. The pneumatic unit of the SIT* cast casting apparatus can be directly connected to the compressed air supply system (connecting hose and service unit with pressure regulator are not included in the delivery).
Scope of Delivery:
ncludes 8 SIT-casting forms: 743Y50=L1, =R1, =L2, =R2, =L3, =R3, =L4, =R4
Register to see prices 0.0 USD
Granulator for polypropylene
Granulator for polypropylene, 400V/15kW, 280 à 330kg/h
Blades made of high-resistant steel ensuring longest usage times
Hopper, cutting chamber, and discharging base are separable for convenient cleaning, parts replacement, and maintenance
Double sound-insulation device in the cutting chamber reducing noise to the minimum
Motor over-load protection and interlocking device well protecting machine itself and ensuring operator safety
Blades can be sharpened for several times after getting blunt to extend blades’ lifespan and save cost

also referenced under: OOMAGRAN300, CRM 78
Register to see prices 0.0 USD
Hot plate with support, 220V / 9.9kW
Dimensions WxDxH: 1390 x 980 x 850 mm
Power requirements: 220V / 50 Hz / 9,9 kW
Temperature range: 50 °C - 200 °C
Working surface W x D: 1250 x 1050 x 860mm
Register to see prices 0.0 USD
Hot plate with support, 400V / 9.9kW
Dimensions WxDxH: 1390 x 980 x 850 mm
Power requirements: 380V / 50 Hz / 9,9 kW
Temperature range: 50 °C - 200 °C
Working surface W x D: 1250 x 1050 x 860mm
Register to see prices 0.0 USD
Heel height measuring device, with printer label
The heel height measuring device comes with an integrated database for storing user data and orders, a multilingual display (DE, EN, NL, FR) with backlight, colour touchscreen with measurements in cm, mm or inches as well as a sturdy and easy-to-clean lower plate with crosshairs to help you position measuring objects precisely. Straightforward zero point calibration (alternative: using the lower plate(s) as the reference point).
Dimensions WxDxH: 500 x 400 x 600 mm
Electrical connection in V/Hz/kW: 1 x 230 / 50–60 / 0.1
Colour: light grey [RAL 7035]
Material: Steel, stainless steel, aluminium
Type of Planning and Equipment: Orthopedic Shoe Technology and Leather Processing
Register to see prices 0.0 USD
Security storage cabinets A1200
The security storage cabinets can also be operated without a connection to a technical exhaust system (exhaust fan) if the compensating measures for explosion protection according to item 4.2, paragraph 3 of the Technical Rules for Flammable Liquids (TRbF) 22 can be implemented. If the compensating measures cannot be taken, the cabinets must be connected to a separate exhaust fan (we recommend the 760E11 air circulation filter attachment, 245) or coupled to an available lamination resin workstation with exhaust fan.

Version: Fire-resistant security storage cabinet 90 minutes according to European standard EN 14470-1, CE-compliant according to EN 45014, GS-tested
Equipment: Exhaust nozzle (nominal size 80 mm) for connection to building-side exhaust air or 760E11 Air circulation filter attachment , 3x shelves, height-adjustable feet
Dimensions WxDxH: 1200x600x2065mm
Interior dimensions WxDxH: 1095x450x1825mm
Bottom drip pan:1 piece (37.6 litres)
Shelf as storage surface:3 shelves
Load capacity: 75 kg per shelf
Weight: 375 kg
Colour: Light grey (RAL 7035)
To be used for: For storage of flammable, liquid and solid hazardous materials in work spaces according to regulations
Register to see prices 0.0 USD
Crutches injection mould child
for elbow child L = 17cm

also referenced under: OOMAMOULEC17, CRM 80
Register to see prices 0.0 USD
Crutches injection mould medium
for elbow adult L = 23 cm

also referenced under: OOMAMOULEC23, CRM 81
Register to see prices 0.0 USD