• Oven, Heating plate
  • Drilling, Milling, Sawing
  • Abrasive
  • Vacuum technology
  • Injection technology
  • Pressurized air system
  • Spare parts for machinery
  • Electric hand machine
Orthopaedic high-speed press, Hardo-SUPER CLASSIC
solid sheet steel construction, safety switch with timer, separate sole press with air cushion filling and toothed rack locking, separate heel press, swivel V-pressure arm, hook back-wall for holding the inner-pressure plates, separate compressed air connection with pressure reducer and pressure gauge, fully automatic compressor system, quick release for press cushion, adjustable bars on fixture device, inflation/deflation valve with reset function. Two side-mounted orthopaedics press stations, without cushion. Left: clear width 450 mm, right: clear width 300 mm, 1 set (12 pairs) inside-pressure plates

Dimensions LxPxH: 1250 x 740 x 1780 mm
Exigences d'alimentation: 400 V / 50 Hz / 0,55 kW

Weight: 250 kg
Register to see prices 0.0 USD
Hydraulic injection machine & Tools kit & spare parts
400V/3500W/9.2Amps

also referenced under: OOMAOPRECR75, CRM 71
Register to see prices 0.0 USD
Belt grinding machine HARDO Caravelle Ortho Solo 115
- Orthopaedic sanding machine
- Enlarged work-space left, without trimmers
- Integrated extraction system with cotton filter
- Suction wall placed back widely
- Removable suction nozzles n Heel breaster on bajonet
- Sanding belts 1× 40×Ø175 + 1×100×Ø100 mm
- Separate belt control
- Suction flap activation controlled by each respective drive
- Sanding wheel on bajonet
- Pneumatic sanding belt tensioning
- Fully automatic filter cleaning
- Additional fine dust filter incl.
- Naumkeag multi-adjustable
- Operation by double push buttons
- Ergonomic HARDO Design
- Colour: light grey RAL 7035
- Electr. specifications: 400V/3Ph/50Hz/3,2kW
- Dimensions: 1150×780×1855 mm (w×d×h)
- Weight: 280 kg
Register to see prices 0.0 USD
Pre-Preg Convection oven, 1000x620x1790mm
Type: PO1800 - Convection Oven for the O&P field
Special unit, otimized for Pre-Preg processingt
Footprint: ~ 1,2 m²
Dimensions: Outisde: W 1230mm - D 920mm - H 1950mm
Inside: W 1000mm - D 620mm - H 1790mm
Housing: Moveable on 4 casters with stop, double doors with double-pane viewing
window
Three zone heating cabinet segmentation by intermediate shelf
Electr. Connection: 400V / 50Hz / 3 Phase / (16 Amp. CEE) / total capacity 10,2 kW
other voltages on request
Heating: 3x 3300W, 3x fan motor with reversing rotation diretion
Temperature sensor: either by oven or mould/material temperature
Temperature control: Microprocessor controlled, User interface with touch-panel, PID-controller
feature, Temperature infinitely adjustable 30°C to 250°C, Temperature unit
adjustable °C/°F , Timer- and Ramp-feature individually programable, graphic
trend indicator, multi-lingual user interface (DE,EN,FR,IT)
Illumination: 2 x 25 watts
Colour: Inside stainless steel, outside structural effect paint RAL 7035 light-grey,
other RAL colours available on request (surcharge)
Weight: net: 395 kgs
gross: 550 kgs (incl. crate)
Accessories: • Universal-crate for Blister-Forming frame
(width adjustable) (Art. No. 07-131)
• Blister-Forming frame D=360mm (Art. No. 07-132)
• Baumeister Pre-Preg Set for PO ovens
Register to see prices 0.0 USD
Belt sander
Effective sanding height of 450 mm, pneumatic belt tension, light strip on sanding belt, integrated floor extraction, extraction on sanding belt, continuous speed control, incl. 649G60=2175X320 sanding belt
Electrical connection in V/Hz/kW 1x 230/ 50-60 / 2,2
Dimensions WxDxH 712 x 875 x 1.787 mm
Belt width 320 mm
Belt speed 6 - 16 m/s
Exhaust nozzle Ø 125 mm
Register to see prices 0.0 USD
Lamination workstation, 1750mm
The lamination bench consists of a frame with a storage surface (grid tray), a work surface for gluing work, a vacuum control box, vacuum points and clamping devices for exhaust tubes. The bench-top cabinet firmly connected to the lamination bench includes a storage surface (grid tray), a roll holder for stockinette materials, suction slots on both sides and a connection for an external fan to extract vapours.

Dimensions WxDxH: 1,750 x 650 x 750/1,750mm
Version: 3 pc. 704G11 clamping device
Diameter of exhaust nozzle for vapour extraction: 180mm
Weight: 135,1kg
Vapour extraction volume flow: Recommended 850 m³/h
Register to see prices 0.0 USD
Oven infrared IR1303 XTR
including Rollabout Tray with integrated Blister Forming frame cradle
Heating with 24 Infrared-Quartz-Tubes, Dual-Zone switching (6/24), Temp.
measurement of the Material surface by opto-electr. IR-sensor, infinitely adjustable
from 30°C to 250°C by SPS controller with PID feature, Software build 3.0 with
maintenance info, programmable Ramp- and Timer-feature with an option to store
slowly raising heat processes, monitoring of the heating process by graphical trend,
tefloncoated (replaceable) Rollabout Tray, 4 casters with stop, height adjustable by
gas-shock (min. 820mm, max. 1050 mm), integrated Blister forming cradle, width
adjustable, retractable when not in use, vertical Frontdoor with double pane Window,
double gas-shock supported, Illum. by two 25W bulbs, colour: colour: RAL7035
(light-grey) / RAL7031 (blue-grey), net weight 360kg
Electr. Conn.: 380-400V / 50-60Hz / 3Ph+N+PE. / 11,1 kW (3 x 32A CEE)
Dim..: outside WxDxH: 1595x1770x1400 mm
inside WxDxH : 1300x1590x500 mm
Register to see prices 0.0 USD
Pre-Preg Convection oven, 1000x620x1200mm
Type: PO1200 - Convection Oven for the O&P field
Special unit, otimized for Pre-Preg processingt
Footprint: ~ 1,2 m²
Dimensions: Outisde: W 1230mm - D 920mm - H 1570mm
Inside: W 1000mm - D 620mm - H 1200mm
Housing: Moveable on 4 casters with stop, double doors with double-pane viewing
window
Three zone heating cabinet segmentation by intermediate shelf
Electr. Connection: 400V / 50Hz / 3 Phase / (16 Amp. CEE) / total capacity 10,2 kW
other voltages on request
Heating: 3x 3300W, 3x fan motor with reversing rotation diretion
Temperature sensor: either by oven or mould/material temperature
Temperature control: Microprocessor controlled, User interface with touch-panel, PID-controller
feature, Temperature infinitely adjustable 30°C to 250°C, Temperature unit
adjustable °C/°F , Timer- and Ramp-feature individually programable, graphic
trend indicator, multi-lingual user interface (DE,EN,FR,IT)
Illumination: 2 x 25 watts
Colour: Inside stainless steel, outside structural effect paint RAL 7035 light grey,
other RAL colours available on request (surcharge)
Weight: net: 283 kgs
gross: 418 kgs (incl. crate)
Accessories: • Universal-crate for Blister-Forming frame
(width adjustable) (Art. No. 07-131)
• Blister-Forming frame D=360mm (Art. No. 07-132)
• Baumeister Pre-Preg Set for PO ovens
Register to see prices 0.0 USD
Complete finishing with 6 independent motors Model ZETA
MACHINE FEATURES

Milling shaft for soles with adjustable fixed guide
Milling shaft for soles with bayonet coupling
Abrasive shaft with 2 independent belts 1650 x 40 mm
Dual-speed abrasive shaft for the three-phase model
Sandpaper advance in canvas
Low-speed waxing shaft with rotating brushes and pads, 3 colors
Adjustable polishing wheel motor
Internal wheels for easy movement
Automatic suction opening only at the used workstation. OPEN SYSTEM
Integrated LED light on abrasive belts
MACHINE DIMENSIONS

Width: 1350 mm - Depth: 770 mm - Height: 1700 mm - Weight: 450 Kg
Register to see prices 0.0 USD
Oven infrared IR1303
including Rollabout Tray with integrated Blister Forming frame cradle
Heating with 18 Infraredt-Quartz-Tubes, Dual-Zone switching (6/18), Temp.
measurement of the Material surface by opto-electr. IR-sensor, infinitely adjustable
from 30 C to 250 C by SPS controller with PID feature, Software build 3.x with
maintenance info, programmable Ramp- and Timer-feature with an option to store
slowly raising heat processes, monitoring of the heating process by graphical trend,
tefloncoated (replaceable) Rollabout Tray, 4 casters with stop, height adjustable by
gas-shock (min. 820mm, max. 1050 mm), integrated Blister forming cradle, width
adjustable, retractable when not in use, vertical Frontdoor with double pane Window,
double gas-shock supported, Illum. by two 25W bulbs, integrated Pre-Preg hose duct
at the left side,
colour: RAL7035 (light-grey) / RAL7031 (blue-grey), net weight 290kg
Electr. Conn.: 380-400V / 50-60Hz / 3Ph. / 8,5kW (CEE 3x 16Amp.)
Dim.: outside HxWxD: 1400x1595x1270 mm
inside HxWxD : 500x1300x1090 mm
Register to see prices 0.0 USD
Belt grinding machine Caravelle Ortho Solo 75
With integrated extraction system and pumice motor.
Heel front cone with bayonet lock, front cone Ø 90mm.
One sanding belt 40 mm, contact wheel Ø 175 mm,
belt length 1650 mm, one sanding belt 100 mm,
contact wheel Ø 100 mm, belt length 1480 mm,
suction wall diagonally recessed (orthopaedics version),
extraction capacity 1300 cubic meter /h.
Coarse and fine dust boxes removable from the front.

Dimensions WxDxH: 720 x 780 x 1550 mm
Power requirements: 400 V / 50 Hz / 2,1 kW

with cam switch and thermo-protected drive motors,
2 m power cord with CEE plug
Register to see prices 0.0 USD
Silicone rolling device
1280x650x(h)1250mm
2x 1500W / 220V
Register to see prices 0.0 USD
JUMBO heating resistance oven
With roll-about tray, 220V-380V / 20kW / 50Hz, working height: 1800x1600x400mm
External dimensions: 2000x1700x500mm
Register to see prices 0.0 USD
Lamination workstation for decentralised vacuum system
Dimensions WxDxH: 1.500 x 700 x 970/1.970 mm
Volume flow: Recommended: 550 m³/h
Weight: 235,5 kg
Material: Steel/wood
Exhaust nozzle Ø: 180 mm
Scope of delivery: Connection to a vacuum system, e.g. 755E600=* vacuum system, workbench with cabinet and shelves, bench-top cabinet with roll storage and suction slots, 758Z145=10 cutting and gluing worktop with edge suction, 2 x 704G11 clamping fixture for suction pipes "Orthofix"
Register to see prices 0.0 USD
Heating oven
Suitable for deep-drawing technology with outer rings and to dry plaster models, with 2 ventilators for uniform warming of plastic sheets, with steel support frame and a storage shelf for plastic sheets, with viewing window and space-saving opening mechanism, with interior illumination and electronic heat regulation. Complete heating cabinet, inside and outside made of stainless steel with an alu sliding shelf, covered in Teflon foils blanks, on ball-bearing mounted rollers.
Delivered with spare parts for 2 years

Technical data:
Exterior dimensions W x D x H: 1450 x 1480 x 1500mm
Interior dimensions W x D x H: 1200 x 1270 x 500mm
Working surface W x D: 1100 x 1030mm
Temperature range: 30° C - 200°C
Power requirements: 400 V / 50 Hz / 4,5 kW
Weight: 280kg

also referenced under: OOMAOVENCR50G, CR5000G
Register to see prices 0.0 USD
Oven infrared IR1003
including Rollabout Tray with integrated Blister Forming frame cradle
Heating with 12 Infraredt-Quartz-Tubes, Temp. measurement of the Material surface by
opto-electr. IR-sensor, infinitely adjustable from 30 C to 250 C by SPS controller with
PID feature, Software build 3.x with maintenance info, programmable Ramp- and
Timer-feature with an option to store slowly raising heat processes, monitoring of the
heating process by graphical trend, tefloncoated (replaceable) Rollabout Tray, 4
casters with stop, height adjustable by gas-shock (min. 820mm, max. 1050 mm),
integrated Blister forming cradle, width adjustable, retractable when not in use, vert.
Frontdoor with double pane Window, double gas-shock supported, Illum. by two 25W bulbs,
colour: RAL7035 (light-grey), net weight 230kgs
Electr. Conn.: 400V / 50-60Hz / 3Ph. / 5,9 kW (CEE 3x 16Amp.)
Dim.: outside HxWxD: 1420x1320x970 mm
inside HxWxD : 500x1000x800 mm
Register to see prices 0.0 USD
Mobile vacuum pump with tank, 40m3/h
400V, 1.2kW, volume 40m³ / h, 25L tank
Register to see prices 0.0 USD
Infrared oven for orthopedic technology, IR801 XTR
Stainless steel housing inside, textured paint RAL 5017 (traffic blue) contrasting color
RAL7035 (light gray) outside, surface heating with 16 infrared quartz tubes,
Temperature measurement of the material surface using an opto-electronic IR measuring head,
Programming steplessly from 30 ° C to 250 ° C via PID controller, 2-line display with
Display of target and actual temperature, quick selection button to call up 4 free
selectable temperature values, double wing door with two double glass viewing windows,
Interior lighting 4x25W, 1 insert plate with Teflon coating,
Electrical connection: 400V / 50-60Hz / 3Ph. / 7.4 kW (CEE 16 Amp.)
Dimensions: outside WxDxH: 900x1300x890 mm
Inside WxDxH: 810x1160x540 mm
Net weight: approx. 230 kg

Register to see prices 0.0 USD
Deep drawing frame, 4x
4 vacuum forming workstations with connection to a vacuum system, e.g. 755E80=* Mobile vacuum pump with tank, tank integrated in the frame, water trap, 1x shelf with grate, 1x replaceable HPME shelf for cutting and gluing, vacuum pipe holder tilts 90°, foot pedals to control the vacuum, vacuum pipes, recommended vacuum forming output 10m³ per workstation
2500x750x750mm
Register to see prices 0.0 USD
Vacupress 620S3 - UNILOCK
Type: VACUPRESS 620 S3 UNILOCK - COOL-TEC - Vacuum-Press for the orthopaedic
shoe technique / O&P field
Footprint: approx. . 0,34 qm / Bench-top version
Dimensions: H: 1050mm - W: 750mm - D: 590mm
Power supply: 400V / 50Hz / 3 Phase / other available
Capacity: 5,9 KW
Heating: 5400 W Infrared Quartz, reflector, 9 elements
Heating-time: Adjustable from 30-199 sec.,
2 LED Displays / Set-time + Remaining-time
Vacuum-pump 0,45 Kw 12 m³/h, two-stage - oil- and maintenance-free / motor protectionswitch
Airfilter: cartridge-type, high capacity
Frame dimensions: 450mm x 600 mm / vertical lift, working area raised on material level
Frame guide: 16 ball bearing, running in steel rails
Vacuum cavity: W: 140mm L: 190mm D: 190mm / integrated in working area,
standard
Frame locking: Main handle, located on the right hand side
UNILOCK mechanism: patented one handle material clamping system, self-adjusting from 0,5 up to 8,0 mm material thickness.
Activation grill: lateral moveable, ball bearing guided, additionally rotateable to th etop
(180°), vertical adjustable.
Illumination: 2 x 35W / 12V Halogen spotlight
Vacuum automatic: Standard - vacuum pump starts automatically when working frame is closed, shuts off when vacuum is reached Vacuum pressure is controlled during moulding process.
Heating automatic: Standard - The Infrared-Heating elements are controlled by an electronic
timer and shut off automatically when pre-set heating time is reached.
COOL-TEC Cooling System: Standard - Integrated cooling-system to decrease cooling period of vacuummoulded materials by use of special air jets. External compressed air supply required. Pressure is internally reduced to 1,5 bar.
Colour: structural effect paint, blue / light grey RAL 5017/7035
Register to see prices 0.0 USD
Pro-Fit 2000 socket router
The Pro-Fit 2000 features a solid steel body for smooth operation, a suction arm with fireproof suction tubing, a suction hood with a quick-change system as well as fastening materials and a safety package. The colour of the tool holder can be individually selected if desired. The standard accent colour is anthracite grey.
Electrical equipment Main safety switch, on/off button for router motor, emergency stop foot switch, 2.5 m power cord with 5x 16 A CEE plug and 5x 16 A CEE socket
Dimensions WxDxH 1,220 x 800 x 1,560 mm
Exhaust nozzle diameter 125 mm
Power cord Power cord with 5x 16 A CEE plug and 5x 16 A CEE socket
Working height 1,000 mm
Space requirements WxD 1,100 x 1,300 mm
Equipment Steel machine body, 5/8" milling shaft thread, adapter from 5/8" to M16 thread, suction hood, short and long shaft protector, exhaust nozzle for external suction system, tool set for changing the socket router cutters, tool holder
RPM milling motor one speed 3,000 rpm
Electrical connection in V/Hz/kW 3 x 400 / 50–60 / 2.2
Colour light grey [RAL 7035]
Accent colour anthracite grey [RAL 7016]
Router shaft length 395 mm
Weight 115  kg
Height adjustment No
Sound intensity level 68 dB[A]
Chip suction Connection to a central chip extraction system with a minimum air velocity of 20 m/s [exhaust nozzle diameter 125 mm]
Register to see prices 0.0 USD
Pro-Fit 1000 vario socket router
Dimensions: 865x670x1125-1525mm
Power: 0.75 kW
Voltage: 230V
Amperage: 7A
Register to see prices 0.0 USD
Oven infrared
With pneumatic door
Temperature: 60° to 250°
50-60Hz, 850W
Dimensions outside: 1640x1134x1756mm
Working area: 1828x1828mm
Register to see prices 0.0 USD
Vacuum forming workstation with integrated pump
The vacuum forming workstation with integrated pump combines several functions: The system can be used for the vacuum forming and draping of plastics around the plaster model. Thanks to the compact design of the vacuum pump, which is already integrated, this workstation is particularly suitable for smaller workshops.

Dimensions WxDxH: 1000x450x1100mm
Version: Single version (vacuum pipe top and on the side)
Register to see prices 0.0 USD
Infrared-Oven IR1001 COMPACT
The new IR1001 COMPACT is of course equipped with the innovative optical temperature sensor and a con- troller of the next generation. Same as the larger Infrared-ovens the two-line PID-Controller keeps the user constantly updated of the preset and actual temperature values. The preselect feature allows the user to store four temperature settings which can be easily called up by use of a single button. A signal light informs the user when the set temperature is reached, even if he is not standing right in front of the control panel.

Technical Data: IR1001 COMPACT
Type: IR1001 COMPACT - Infrared Oven for the O&P field, Bench-top design
Footprint: approx. 1m²
Dimensions: Outside: W 1270 mm - D 920 mm - H 455 mm / Inside: W 1000 mm - D 800 mm - H 140 mm
Tray: tray movable full size on ball bearing guides, easy to remove without tools for fast teflon replacement, effective heating area: W 950 x D 750 mm
Power supply: 400V / 50/60Hz / 3 Phase / (16 Amp. CEE) / total capacity 7,7 kW, (other voltages available)
Heating: 12 Infrared-Quartz-tubes with reflector, Stand-by switch
Temperature control: opto-electronic IR-measuring unit, Measuring of the material´s surface temperature!
Temperature control: PID-Controller, infinitely variable from 30°C to 250°C
Register to see prices 0.0 USD
Socket router machine
380V, 1.25kW / 1.7kW
with dust collector
Register to see prices 0.0 USD
Infrared oven for orthopedic technology, IR803
Stainless steel housing inside, spray paint outside, Heating with 8
Infrared-Quartz-Tubes, Temperature measurement of the Material surface by
opto-electr. IR-sensor, infinitely adjustable from 30 C to 250 C by SPS controller with
PID feature, Software build 3.0 with maintenance info, programmable Ramp- and
Timer-feature with an option to store slowly raising heat processes, monitoring of the
heating process by graphical trend, Double-Frontdoor with double pane Window, 2x
25W Illum. bulb, 1x tray with teflon
colour: RAL7035 (light-grey) / RAL 7031 (blue-grey)
Electr. Conn.: 380-400V / 50-60Hz / 3Ph. / 3,7 kW (16 Amp. CEE)
Dim.: outside: WxDxH: 900x700x920 mm
inside: WxDxH : 810x580x540 mm
net weight: 133 kgs
Register to see prices 0.0 USD
Pfaff post-bed high-speed sewing machine
High-speed post-bed sewing machine with post right of the needle, single needle double-stick, with needle and wheel feed and driven presser foot, curved needle plate Version B = medium
Equipped with electromagnetic thread trimmer 900/81, presser foot lift, automatic start and end lock.
Table base 106 × 50 cm with slanted base, machine tilted forwards, stable, sturdy support frame made of square steel tubing 230 V servomotor and control panel
Dimensions W x D x H: 1060 x 500 x 1300 mm
Max. stitch length: 4,5 mm
Clearance under presser foot: 7 mm
Sewing speed: 3000 Stitch/min.
Needle system: 134 R
Power requirements 230 Volt, 50 Hz., 0,370 kW
Weight 100,000 kg
Register to see prices 0.0 USD
Socket router machine ORTHO 22, 220V
220V, 2.5kW
2800 tr/min
110x60x150cm, 140kg

- Horizontal motor with 75x200mm abrasive pad
- M16 thread and T22 abrasive pinecone at the top of the shaft
- Foot switch operation
- Predisposition for connection to a centralized suction system
- diameter 150mm on the side
- Suction mouth behind the adjustable pad
Register to see prices 0.0 USD
Sewing machine ADLER zig zag and straight
DURKOPP ADLER class 525i zigzag machines, lockstitch, have been designed with interchangeable control cams. They are specially made for the production of decorative stitches (outlines) on made-up clothes and ladies' underwear in textile materials. These machines can be used for sewing light and medium textiles and leathers.
230V / 50/60 Hz
Delivered with:
- Table 105,110 or 120cm south 55 or 60cm
- Fixed frame
- Electronic motor
- Oil
- Accessories
Register to see prices 0.0 USD
Sewing machine "Adler" 30-70, arm 470 mm, foot control
Dimensions WxDxH: 850 x 500 x 1140mm
Weight: 83,000kg
Max. stitch length: 5mm
Sewing speed: max. 300 stitches
Needle system: 332 L LG, 332 LG
Footprint: 1000 x 750mm
max. presser foot stroke: 12mm
Register to see prices 0.0 USD
Granulator for polypropylene
Granulator for polypropylene, 400V/15kW, 280 à 330kg/h
Blades made of high-resistant steel ensuring longest usage times
Hopper, cutting chamber, and discharging base are separable for convenient cleaning, parts replacement, and maintenance
Double sound-insulation device in the cutting chamber reducing noise to the minimum
Motor over-load protection and interlocking device well protecting machine itself and ensuring operator safety
Blades can be sharpened for several times after getting blunt to extend blades’ lifespan and save cost

also referenced under: OOMAGRAN300, CRM 78
Register to see prices 0.0 USD
Hot plate with support, 220V / 9.9kW
Dimensions WxDxH: 1390 x 980 x 850 mm
Power requirements: 220V / 50 Hz / 9,9 kW
Temperature range: 50 °C - 200 °C
Working surface W x D: 1250 x 1050 x 860mm
Register to see prices 0.0 USD
Hot plate with support, 400V / 9.9kW
Dimensions WxDxH: 1390 x 980 x 850 mm
Power requirements: 380V / 50 Hz / 9,9 kW
Temperature range: 50 °C - 200 °C
Working surface W x D: 1250 x 1050 x 860mm
Register to see prices 0.0 USD
Crutches injection mould child
for elbow child L = 17cm

also referenced under: OOMAMOULEC17, CRM 80
Register to see prices 0.0 USD
Crutches injection mould medium
for elbow adult L = 23 cm

also referenced under: OOMAMOULEC23, CRM 81
Register to see prices 0.0 USD
Crutches injection mould big
for children's elbow L = 27cm

also referenced under: OOMAMOULEC27, CRM 82
Register to see prices 0.0 USD
Beltsander with 2 sanding belt, 2 speeds, 2500 x 50mm
Sander with two telescopic booms on rubber contact rollers.
Power supply: 400 Volt
Belt: 50 x 2500 mm
Weight: 140 kg
Headphones mandatory (according to DIN EN 352)

400W / 1.27kW

also referenced under: OOMAMARPDB01, CRM 91
Register to see prices 0.0 USD
Automatic screw compressor, 1000l
Effective delivery volume approx: 1000 l/min
Maximum Pressure: 10 bar
Pressure vessel capacity: 500 l
Air outlet: ¾ "
Length approx: 1980 mm
Width/depth approx: 700 mm
Height approx: 1630 mm
Weight approx: 307 kg
Absorbed power electric motor: 7.5 kW
Supply voltage: 400 V
Mains frequency: 50 Hz
Motor type: Electric
Sound pressure level Lp: 68 dB(A)
Register to see prices 0.0 USD
Vacuum pump
with connection kit 121 W 312 and 2 enveloping tubes (adult 121 W 001.L + child medium 121 W 001.M), 220 Volts/750W, 0.85 to -0.1 mbar

also referenced under: OOMAVAPUCR10, CRM 56, CR 1000
Register to see prices 0.0 USD
T2002 bench top milling machine
fixedly mounted on a trapezoidal steel plate,
for mounting on a workbench or the like,
multi-stage height adjustment of the milling axis,
powerful motor with 2 turning speeds,
electromagnetic motor brake,
removable axle guard
400V / 50Hz / 2,7-3,4 kW
Register to see prices 0.0 USD
Dust aspirator SRF K-10 without connecting kit
230V/1100W/7.5A, 570-890 m3/h, dimensions 1200/600/H1'380mm

also referenced under: OOMADUSTAS01, CRM 107
Register to see prices 0.0 USD
Swiveling disc sander combined with telescopic belt, 400V
Space requirements WxD: 1400 x 800 mm
Power requirements: 400 V / 50 Hz / 1,27 kW / 1,7 kW
Noise level: 75 dB(A)
Power cord length: 2 m
Weight: 134,000 kg
Calour: lichtgrau (RAL 7035)
Scope of delivery: with 1 Sanding belt (2500 x 50 mm), 1 round grinding plate, 2 m power cord with CEE plug
Sanding belt speed: 15/30 m/sec
Dimension upper part W x D x H: 1000 x 500 x 1622 mm
Description: left side: aluminium plane wheel 350 mm Ø, continuous, inclinable support table, folding down at the side for full use of the grinding surface, extraction connection piece 100 mm Ø to connect to a chip extraction system with a minimum air velocity of 20 m/s right side: belt tensioning arm with closed protection hood, extraction connection piece 100 mm Ø, belt length 2500 mm, belt width 50 mm with round plate, contact wheel, sanding belt
Register to see prices 0.0 USD
Vacuum-Pump TLV 40-HV II
400V, 1.2kW, volume 40m³ / h, 25L tank
Register to see prices 0.0 USD
Wide abrasive belt sander, without tool kit
380V / 2.2 - 3kW / 1400 - 2800 rpm

also referenced under: OOMAMARPLB25, CRM 84.2
Register to see prices 0.0 USD
Knee inserting press
for inserting the knee tube inside the concave cylindre

also referenced under: OOMAALIGMIM
Register to see prices 0.0 USD
"HOLZSTAR" band saw, for wood, plastic and metal
- Heavy design with high dead weight for maximum running smoothness
- Particularly quiet and pretorsionally stiff machine housing
- Cast flywheels with rubber coating and cleaning brush
- 3-roller precision saw band guide as standard at top and bottom
- Large cast iron saw table, swivels from 0° to +15° with ground and polished surface
- Large cast-iron parallel fence with round rod guide, easilyguide, easily movable
- Saw blade tension indicator
- Precise cutting height adjustment overover toothed rack with millimetre scale
- Self-braking motor

also referenced under: HBS 640 AS
Register to see prices 0.0 USD
Bench top socket router machine ORTHO 11S
MACHINE FEATURES
- Horizontal motor with bayonet connection
- T22 pine cone and pad supplied
- Foot switch operation
- Arrangement for connection to a centralized vacuum system
- 60 mm diameter on the side
- Suction channel adjacent to the pad

MACHINE DIMENSIONS
- Width 700mm - Depth 400mm - Height 400mm - Weight 50 Kg

POWER SUPPLY
- Single phase 230V - 1ph - 50Hz with inverter
Register to see prices 0.0 USD
Socket router machine
380V, 2200W, 3000rpm
with dust collector
Register to see prices 0.0 USD
Abrasive belt sander, 2 speeds, conical long shaft
Swinging honing machine with funnel-type milling machine
All models we offer-ensure the highest efficiency, versatility and safety
All the models can be fitted with suction device
Weight: 100 Kg
Headphones mandatory (according to DIN EN 352)

380V, 1.2 - 1.7kW / 1400 - 2800 rpm

also referenced under: OOMAMARP3000, CRM 85
Register to see prices 0.0 USD