Powerful forged shape, special wear-resistant varnish; uncoated edge. Slightly tapered interior to eliminate cutouts.
For drilling or making gaskets or sealing rings in rubber, leather, felt, plastic, cork, fabric or similar materials.
1 arch cookie cutter each: 19 pieces Ref. 2-20
Number of arch cutters: 19

- Adapter ring, holder for suction hose, for clamping in a vice
- Structure made of square and galvanized steel tubes
- Holder for SACH* foot adapter 743Y34 Cylindrical head screw 501T3=M10X60 SACH* foot adapter with threaded connection 2R8=M10 Single-channel suction hose 755R90, dimensions WxDxH 42 x 30 x 400 mm, connection Ø 13 mm Two-channel suction hose 755R100, dimensions W x D x H 42 x 30 x 520 mm, connection Ø 6 mm
- 260 x 1,020 x 300mm, 10kg

110–240 V / 50–60 Hz
During measurement, it is possible to check the effect of joint stabilization with ground reaction forces.
Thanks to the adjustment of plantar flexion under load, the precise adjustment of the medical device can be performed very quickly and in a targeted way:
- Easy transportation
- Modern and functional design
- Data logging of the exhaustive and automatic equipment
- Simplifies communication with caregivers
Tablet with help function:
- Synchronous measurement and representation of the line of force of the two legs with display of the distribution of the load
- Measurement of vertical forces just as in L.A.S.A.R. Posture
- Complete tutorials, help functions and integrated alignment recommendations
- Simplified transition to another view of the camera
- Representation of vertical and horizontal forces indicating actual load
- Screen capture function to quickly record and analyze the conditions of the measurement
- Complete patient database with instrumentation flow, comparison view and possibility of creating a PDF

M16

Densely woven cotton cloth evenly spread with synthetic resin bonded Aluminium Oxide (A). Very good grit bonding, high abrasion performance and long service life.
Type VSM KK 114 F: Brown fabric, for extremely demanding applications. This grade is particularly supple, resistant to oil and petroleum and can be torn in longitudinal direction to yield clean edges without fraying.
Packaging tape with integral tear-off cutter.
Application:
Predominantly for rubbing down metals by hand, but also suitable for all other materials.

Thick cotton pad with abrasive grain of normal corundum

Very strong and flexible latex paper evenly spread with Silicon Carbide (SiC). Good grit bonding, high abrasion force and long service life.
Sheet size 230×280 mm.
Primarily for rubbing down by hand in bodywork building, repair workshops, and paint shops, for fine rubbing down of varnished or filled areas.
Grinding media: Silicon carbide
Grinding medium code: SiC
Grit: 150
Grit designation: medium
Manufacturer's designation: 911 C

also referenced under: OOMAMARPOL3500A, OOMAMARPOL3500C CRM 90, CRM 90.1

Special steel drive head ground, hardened and burnished; with fixed pins.
Application: For twin hole nuts.
Note: Pin ⌀ = pin nominal ⌀ - 0.1 mm; tolerance field h12.
Pin spacing adjustable: 7 mm - 40 mm
overall length: 115 mm

Special steel drive head ground, hardened and burnished; with fixed pins.
Application: For twin hole nuts.
Note: Pin ⌀ = pin nominal ⌀ - 0.1 mm; tolerance field h12.
Pin spacing adjustable: 11mm - 60mm
overall length: 160mm

Narrow shape with profiled body in double T (chrome). 22 ° jaw position. Forged and hardened. With graduation on the jaws.
Maximum opening: 13mm
Total length: 100mm

Narrow shape with profiled body in double T (chrome). 22 ° jaw position. Forged and hardened. With graduation on the jaws.
Maximum opening: 19mm
Total length: 150mm

Narrow shape with profiled body in double T (chrome). 22 ° jaw position. Forged and hardened. With graduation on the jaws.
Maximum opening: 30mm
Total length: 250mm

Narrow shape with profiled body in double T (chrome). 22 ° jaw position. Forged and hardened. With graduation on the jaws.
Maximum opening: 24mm
Total length: 200mm

Narrow shape with profiled body in double T (chrome). 22 ° jaw position. Forged and hardened. With graduation on the jaws.
Maximum opening: 34mm
Total length: 300mm

1 straight and 1 angled point; nylon handle. Point hardness 48 - 55 HRC.
overall length: 230 mm
Type of product: Steel scriber

510 x 380 x 550 mm

To be used for three-dimensional alignment of leg orthoses and positioning of knee and ankle joint points on a plaster negative or plaster positive.
Dimensions WxDxH: 270 x 380 x 770 mm

Robust, knurled body with interchangeable hardened tip and ergonomic tip for high user comfort. The punching power can be adjusted at will by rotating the tip.
Material (s): Special tool steel.
Total length: 110 mm
⌀ tail: 10 mm
Min impact force: 47 N
Max impact force: 78 N
Material: Special tool steel

for attaching decorative fabrics, posters, labels, nonwovens, oiled papers and tar papers, PC8000

for attaching decorative fabrics, posters, labels, nonwovens, oiled papers and tar papers, PC8000

1335 x 13 x 0,65 mm, 6-10 teeth

150mm

Very compact Li-ion fast charger with practical cable reel, for 14.4 to 18 V batteries. The 4.0 Ah battery is ready for use after 25 minutes

for 701P250=* Belt sander
Length: 2,175 mm
Grit: 40
Width: 320 mm
Weight 0.82 kg
To be used for: Processing wood and plastics

Ceramic bonded combination oilstones, hardness O/ P. One side coarse for roughing, the other side fine for finishing.
Special Aluminium Oxide 100 grit (coarse) with long working life. Other side precision abrasive, 280/320 grit (fine), very free cutting, high surface quality.
Application:
For deburring, finish smoothing of irregularities, rounding of edges.

Ceramic bonded combination oilstones, hardness O/ P. One side coarse for roughing, the other side fine for finishing.
Special Aluminium Oxide 180 grit (medium) with long working life. Other side precision abrasive, 500 grit (very fine), very free cutting, high surface quality.
Application:
For deburring, finish smoothing of irregularities, rounding of edges.

Made entirely of forged steel − guaranteed unbreakable.
Opens forward. With forged pipe jaws underneath the normal jaws

For connecting screwdriver bits to drive attachments or screwdrivers with a 1/4, 3/8 or 1/2 inch square drive.
With quick-change coupling; for electric screwdrivers.
Square drive: 1/4 inch
overall length: 30 mm
Hexagon drive: C 6.3 (1/4 inch)

Description
Content:
Assorted bits blades C6.3 (1/4 inch); 1 coupling shank.
Content table use:
30 bits set 1/4 inch C6.3, length 25 mm: gs_profil_phillips 1 pc. each size 1; 2; 3
gs_profil_pozidriv 2 pcs. each size 1; 2; 3
gs_profil_schlitz 1 pc. each size 4; 5; 6.5
gs_profil_torx 2 pcs. each size TX10; TX20; TX40
gs_profil_torx 3 pcs. each size TX15; TX25; TX30
gs_profil_6kant 1 pc. each size 4; 5; 6
1 adapter: 1/4 inch gs_profil_4kant-einsatz – 1/4 inch gs_profil_6kant-einsatz
Adapter: 1 pc.

Made of tough rubber (90 Shore), non-rebound; with powerful impact. Worn faces can be reworked by turning on a lathe. With ash wood handle.
Head length: 90 mm
Head ⌀: 54 mm
Weight: 300 g
Handle length: 320 mm

Solid polishing pastes in homogeneous blocks, easy cleaning after use

also referenced under: OOMAMARP3000K, CRM 100