Workstations and storage

  • Machine
  • Physiotherapy
  • Tools
  • Orthopedic material
  • Diagnostic equipment
  • Teaching material
  • Workstations and storage
  • Personal protective equipment (PPE)
Register to see prices 0.0 USD
3M Chain Tram Reinforced Adhesive Tape 50mmx50m
The 8954 Tartan™ tape is a polypropylene tape reinforced with fiberglass and coated with a rubber resin adhesive. It provides good moisture resistance and has excellent initial adhesion.

- It is commonly used for general reinforcement of cardboard or light bundling and maintenance purposes.
- It adheres well to various surfaces.
- Strength: 135 N/cm.
Register to see prices 0.0 USD
Additional shelf, 1000x500mm
Allowable shelf load: 150 kg
Dimensions: 1000x500x25mm
Register to see prices 0.0 USD
Air circulation filter attachment with activated charcoal filter
for: 758F200/758F220 Safety storage cabinet
Version: According to directive 2006/95/EC (Low Voltage Directive), directive 2004/108/EC (EMC Directive), directive 94/9/EC (ATEX) labelling: EX II 3/- G Ex ic nA IIB T4 Gc
Equipment: 760E14 Active carbon filter for filtering solvent vapours (hydrocarbons), filtration up to 99.99% under normal operating conditions, VDE* tested filter monitoring, VDE* tested exhaust monitoring, connection cable, mains plug *VDE: Association for Electrical, Electronic and Information Technologies
Dimensions WxDxH: 305 x 555 x 210 mm
Volume flow: 25 m /h
Material: Powder-coated thin steel sheet
Speed: 2.450 min-1
Sound intensity level: 39 dB(A)
Electrical connection in V/Hz/kW: 1 x 230 N/PE / 50-60 / 0.03
Weight: 17 kg
Colour: Light grey (RAL 7035)
To be used for: Ventilating security storage cabinets without additional exhaust ducts
Current draw: 0.13 A
Consumables: 760E14 Active carbon filter
Optional accessories: To be installed on 758F200 or 758F220 Security storage cabinet (760E13 adapter for air circulation filter needed)
Register to see prices 0.0 USD
Anvil base
510 x 380 x 550 mm
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Bench vice 140mm
Made entirely of forged steel − guaranteed unbreakable.
Opens forward. With forged pipe jaws underneath the normal jaws
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Cable reel, 15m
Cable unwinders with automatic guided winding and extraction mechanism, multiple stops per revolution. Closed plastic case and very resistant to breakage. Thermal overload protection, robust neoprene H07RN-F cable with connector.
Easy to mount on a wall or ceiling with a swivel range of 150 °.
Better ergonomics thanks to effortless work, secure storage and prevention of the risk of accidents and injuries due to cables laid on the floor.
Shockproof and protection against splashing water: Category 2 (K2) according to BGI
Rated power unwound: 2000 (16 A) W
Nominal voltage: 250 V
Length: 325 mm
Width: 185mm
Height: 275 mm
Cable class: H07RN-F
Cable design: 3G1.5
Cable material: Neoprene
Cable length: 15m
Register to see prices 0.0 USD
Cable, 250V
Approved for use outdoors and in damp rooms (IP44).
Resistant to oil, gasoline and UV rays.
Neoprene rubber cable with rubber plug and socket protected against splashing water.
Operation:
IP44: Protection against splashing water from all directions and protection against the ingress of foreign bodies ⌀> 1 mm, but tools and wires must be kept away.

Register to see prices 0.0 USD
Cart for Plaster Bandages
Plastic coated enclosed unit, with two drawers and two swing doors, seamless table top, with three sided gallery with an adjustable plastic shelf, push handle and four wheels, Ø 125 mm, electrically conductive, with wall bumpers
Dimensions WxDxH: 630 x 580 x 930 mm
Working height: 860 mm
Weight: 62 kg
Colour: grey-white (RAL 9002)
Register to see prices 0.0 USD
Cloth Tape, 50mm x 50m, Black
On PE-coated fabric, universal repair tape suitable for rough surfaces, water-resistant, with strong adhesion.
Register to see prices 0.0 USD
Combinable cabinet with solid sheet hinged door
Housing for drawers, shelves, etc. possible in steps of 20 mm. The base and upper cabinets are provided with corresponding perforations for screwing together, equipment with castors (height 1200 mm max.) Or wall mounting.
Doors with safety edges, reinforced and rigid, hinged or sliding door available, solid sheet model or with polycarbonate manhole. The cabinet without doors can also be used as open shelving.
Cylinder locks with 2 keys each integrated in the sliding handle. On request, possibility of delivery of locks for installations with security card at an additional cost.
Colors: As standard, body in light gray RAL 7035, doors and drawers in signal blue RAL 5005, powder-coated.
Cabinets fitted directly or subsequently with drawers must be anchored to the floor or to the wall to avoid any risk of tipping and may under no circumstances be subsequently fitted with casters.
In the case of specific equipment, make sure that the sum of the mounting heights does not exceed the useful height of the cabinet.
Shelves and accessories for combinable cabinets, see art codes. 957000 - 957100.
Installation of drawers in the upper part of the cabinet for base cabinets and in the lower part of the cabinet for upper cabinets.
Material thickness: 0.9mm
Permissible load of drawers / extendable shelves: 60 kg
Permissible shelf load / Maximum load per rack distributed over the surface (on the metal): 100 kg
Allowable load internal cabinet body: 1000 kg
Drawer extraction (partial / total): 100%
Door opening angle: 225 degree
Height adjustment in steps: 20 mm
Cylinder lock: Modular cylinder
Available colors: RAL 9002, 7035, 7005, 7016, 6011, 5018, 5012, 5011, 5005, 3003
Safety certificate: GS TÜV Süd
Height: 800 mm
Width: 500mm
Depth: 550 mm
Useful height: 640 mm
Weight: 30 kg
Register to see prices 0.0 USD
Coroplast Adhesive Tape, 38mm
soft-PVC-adhesive tape
colour: transparent
e.g. for sealing damaged PVC-foil
Register to see prices 0.0 USD
Cross table with vice
Width of the jaws: 150mm
Opening of the vice: 130 mm
Height of the jaws: 40 mm
Between axis: 160 mm
Overall dimensions WxDxH: 450x450x160 mm
X axis, longitudinal stroke: 200 mm
Y axis, transverse stroke: 200 mm
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Double bucket trolley with press
Trolley with 2 buckets of 18 L each
Large capacity: 36 liters (2 x 18 l)
Gray trolley with handle for easy handling
Dimensions: L 67 x W 41 x H 50 cm
Weight: 9.1 kg
With press to wring out your tea towel
Register to see prices 0.0 USD
Double-sided adhesive tape 19mm, 100m
Coating of a modified acrylic adhesive, resistant to light and aging. The adhesive is highly resistant to plasticizers and features a high initial adhesive strength and good shear resistance. Applications include mounting signs, nameplates, reinforcing doors in the automotive industry, attaching plastic bags, continuous paper and poster mounting, and joining paper and film rolls.
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Double-sided tape 12mm, 50m
The 3M™ GPT-020F double-sided tape is characterized by high moisture resistance, very high immediate adhesion, excellent shear strength, even at high temperatures, as well as good UV resistance.
Register to see prices 0.0 USD
Electronic Table Scale
Simple, particularly lightweight compact scale.
Very simple operation by means of 2 keys.
- Taring function (accumulation of weights) for simple zeroing of the display.
- Battery operation, automatic shutdown after 3 minutes.
- Connection of an AC adapter possible.
Delivery:
With 1 battery
Technical data
Maximum weighing range: 0g - 6000g
Reading: 0.1g
Manufacturer Part Number: EMB
Tray dimensions: ⌀150
Width: 170mm
Depth: 244mm
Height: 39mm
Power supply: Battery operation
Number of batteries included: 2
Net weight: 0.55kg
Register to see prices 0.0 USD
Empty plastic tool box
Made of polypropylene - light, robust and shockproof. Resistant to most acids and bases. Padlock closure, 5 handle 5 mm
Volume: 20 l
239x474x190 mm
Weight: 1.9 kg
Number of variable lockers: 6
Register to see prices 0.0 USD
Film holder with bracket, 972 x 615mm
Dimensions DxH: 972 x 615mm
Necessary room height: In combination with the lamination workstations, a room height of 2.60 m is required
Register to see prices 0.0 USD
Galvanized steel grating, 1250x600mm
Permissible shelf load / Maximum load per rack distributed over the surface (on the metal): 400kg
Height: 30mm
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Hand sanitizer dispenser
Because bacteria hide everywhere. The wall dispenser ensures a particularly hygienic hand washing process. Trigger the pumping mechanism with your elbow or forearm and avoid direct contact with your hands. The dispenser can be filled with liquid soap or disinfectant in just a few steps. Its simple and functional design makes it a versatile tool for use at home or in catering as well as at work.

Main specifications
Height: 28cm
Material: Metal
Volume: 500ml
Register to see prices 0.0 USD
Heavy-duty trash bag roll, 110l
Garbage bag made of premium low density polyethylene with reinforced thickness.
Bellows bags with closing link, adaptable to all types of garbage cans and collectors.
Optimal resistance to falling and breaking of the closing link.
The tightness of the welds allows safe handling.

Film thickness: 100 µ.
Volume: 110 liters.
Color Black.
Register to see prices 0.0 USD
Hexagonal workbench for collective work
Sheet steel drawer units. Central closure by cylinder lock. Drawers with large aluminum handle bar and label holder, extendable up to 90%. Interior with notched walls for compartmentalization of drawers.
Established load capacity / table - Maximum load per compartment distributed over the surface (on the wood): 2,000 kg
Worktop thickness: 50 mm
Established height: 850 mm
Worktop material: Beech plywood
Usable width of drawers: 490 mm
Drawer cabinet depth: 630 mm
Usable depth of drawers: 520 mm
Width of drawer unit: 600 mm

Register to see prices 0.0 USD
Hinged glass door cabinet with shelves
Casings and doors made of 0.9 mm sheet steel, shelving possible in 40 mm steps. Doors reinforced internally and lockable by a sliding handle with cylinder lock.
With hinged doors with viewing window (polycarbonate lenses).
Permissible shelf load / Maximum load per rack distributed over the surface (on the metal): 60 kg
Allowable load internal cabinet body: 500 kg
Door opening angle: 225 degree
Height: 2000 mm
Width: 1000 mm
Depth: 400mm
Useful height: 1,840 mm
Number of shelves: 4
Register to see prices 0.0 USD
Hinged pipe vice 2 inch
Entirely made of steel, unbreakable. Foldable form with self-closing coupling hooks
Register to see prices 0.0 USD
Hydraulic tube bender 3/8-2"
Technical characteristics
Radius of curvature (middle tube): 45; 50; 65; 100; 130; 150; 200mm
Maximum thickness: 5.5 mm
Max bending angle: 90 degree
For nominal pipe sizes: 3/8 – 2 inch

Heavy-duty hydraulic tube bender with closed hydraulic system and return spring for better piston control. Cast iron pads and shapes, powerful piston delivering a pressure of 450 bars. High quality piston seals prevent leakage and increase service life. Skates with bending angle indication. Safe bending of tubes thanks to closed flange. The special design of the lever ensures protection against overloads. Delivery in a resealable wooden box.

Use:
For bending galvanized and black steel tubes as well as gas tubes (3/8 inch − 2 inch). Max. bending angle 90°, tubes max. 5.5 mm thick (2 inch tubes). Easy actuation thanks to the long piston stroke with each pump. Universal use in mechanical engineering, for work on pipeline systems, locksmithing, etc.

Content:
1 form of each: Ref. 3/8; 1/2; 3/4; 1; 1.1/4; 1.1/2; 2
Skate 2 pc.
Hydraulic tube bender: 1 pc.
Wheels: 3 pcs.
Register to see prices 0.0 USD
Insulating tape, black, 25mm
hardly flammable, without plasticizer, adhesion maintained also at low temperature
Register to see prices 0.0 USD
LED rechargeable battery torch 145 mm
Technical characteristics:
Flashlight Function: Focusing
ATEX zone: none
Luminous flux: 300 lm
Lighting duration: 3 h
Power supply: Battery operation
Number of batteries included: 1
Battery type: Li-ion
Battery capacity: 2.6 A h
Total length: 145mm
⌀ head: 35 mm
Weight: 188g
EAN/GTIN: 4045197727244
Description
Execution:
Focusable and very robust cordless LED flashlight made of anodized aluminium. One-handed focusing allows quick and easy adjustment of the light beam. Rotary switch with integrated battery charge indicator and micro-USB port.
Delivery:
With micro-USB charger, wrist strap and GARANT transport box
Register to see prices 0.0 USD
LR3 batteries, 4pcs
High quality branded alkaline manganese batteries last 2-3 times longer and can be stored twice as long as zinc and carbon batteries.
HOLEX batteries provide long-lasting and reliable power.
Number of batteries included: 4
Chemical composition: Alkaline-manganese
Battery designation: Micro, AAA
International format: LR3
Rated voltage: 1.5V
rechargeable: no

Register to see prices 0.0 USD
Large wheelie bin 120 l
Large wheelie bin in tapered plastic body shape. Stabilising ribs at the top edges. Cover with all-round sealing lip for condensate. The lid handles are easy to hold and are arranged obliquely. 4-piece hinges (size 80: 2-piece hinges) with hinge pin retainers. Reinforced base with patented arrangement of axles. Sturdy external chassis with robust reinforced axles and free-running wheels. Noise-suppressed cover opening satisfies the noise reduction regulations to the EU directive 2000/14.
Enhanced container stability due to special design of the base, with through axle contour.
Volume: 120 l
Height: 1,005 mm
Width: 480 mm
Depth: 555 mm
Wheel ⌀: 200 mm
Colour: blue
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Machine vice with jaw width 100mm
Width of the jaws: 100mm
Opening of the vice: 100 mm
Height of the jaws: 27 mm
Between axis: 130 mm
Overall dimensions WxDxH: 165x190x57 mm
Weight: 2.7kg
Register to see prices 0.0 USD
Machine vice with jaw width 120mm
Width of the jaws: 120mm
Opening of the vice: 110 mm
Height of the jaws: 30 mm
Weight: 6.5kg
Register to see prices 0.0 USD
Marker set for whiteboard 4pcs
Board writers with pigmented ink, no odour, wipe off dry. Magnetic cap with integral rubber. 4 pieces, assorted colours: red, black, green and blue. With anti-bacterial coating for a high degree of infection prevention. Line thickness:1 – 3 mm. 3 days cap-off time. Up to 30% of recycled material.
Register to see prices 0.0 USD
Metal shelf, 2000x1000mm
Ideal for storing plaster molds and models
Allowable shelf load: 150 kg
Number of shelves: 5
Dimensions: 1060x536x2000mm
Total maximum load: 1300 kg
Register to see prices 0.0 USD
Moment screw clamp 250mm
High quality malleable cast iron clamping arms; strong prismatic steel slide beam, knurled, electro-galvanised. Low friction steel spindle, burnished with trapezoidal thread and movable jaw. Instant (high speed) adjustment, reliable clamping. Up to size 400 with plastic protective cover on the clamping jaw, from size 500 onwards without protective cover.
Standard: DIN 5117
Cross section of the slide rail: 29x9mm
Throat: 120mm
Jaw capacity: 250mm
Register to see prices 0.0 USD
Moment screw clamp 500 mm
High quality malleable cast iron clamping arms; strong prismatic steel slide beam, knurled, electro-galvanised. Low friction steel spindle, burnished with trapezoidal thread and movable jaw. Instant (high speed) adjustment, reliable clamping. Up to size 400 with plastic protective cover on the clamping jaw, from size 500 onwards without protective cover.
Standard: DIN 5117
Cross section of the slide rail: 35×11 mm
Throat: 120 mm
Jaw capacity: 500 mm
Register to see prices 0.0 USD
Moment screw clamp 800 mm
High quality malleable cast iron clamping arms; strong prismatic steel slide beam, knurled, electro-galvanised. Low friction steel spindle, burnished with trapezoidal thread and movable jaw. Instant (high speed) adjustment, reliable clamping. Up to size 400 with plastic protective cover on the clamping jaw, from size 500 onwards without protective cover.
Standard: DIN 5117
Cross section of the slide rail: 35×11 mm
Throat: 120 mm
Jaw capacity: 800 mm
Register to see prices 0.0 USD
Mounting frame with three integrated lasers for the PROS.A. Assembly
The mounting frame with three lasers can be retrofitted easily for the PROS.A. Assembly. The mounting frame has three integrated lasers that are operated via a rechargeable power bank. This means there is no need to spend time setting up external lasers. The lasers can be flexibly mounted and easily positioned.

- Using an adjustment plate, the lasers can be returned to their home position at any time
- The lasers produce practical vertical lines, which you can use e.g. to precisely align transfemoral prostheses
- Detailed alignment recommendations and aids simplify the prosthetic alignment

Dimensions WxDxH: 707 x 521 x 464 mm
Weight: 14.8 kg
To be used for: 3 laser lines [1 frontal plumb line and 2 sagittal plumb lines]
Scope of delivery: Mounting frame with 3 lasers including holder, 1 power bank including USB cable, Schuko mains adapter and holder, main switch, 743Y689 gauge for laser alignment, mounting material, markings as mounting aid
For: Mounting frame for 743A220 PROS.A. Assembly and 743A200 PROS.A. Assembly [old model]
Type of Planning and Equipment: Laser Technology and Alignment Apparatuses
Register to see prices 0.0 USD
Mounting stool
Max. static bearing load: 100 kg
Seat height: 440 – 530 mm
Length approx: 380 mm
Height approx: 440 mm
Weight approx: 5.7 kg
Register to see prices 0.0 USD
Multimeter
Ergonomic dual-material housing with rubber coating. Large, easily readable digital display with switchable backlighting. Automatic range selection measuring devices. All devices with contact tip attachment on the back for one-handed use, with holder.
Operation:
IP67: Protection against temporary immersion in water and protection against the ingress of dust (dust tight), as well as complete protection against contact.
Standard: IEC / DIN EN 61010-1; GS TÜV Rheinland and CE marking.
Delivery: With batteries, measuring cables
Display range 4'000
Display with backlight: yes
Basic accuracy: 1%
IP protection index: IP 67
Audible continuity check: yes
Diode control: yes
Measuring method: TRUE RMS (AC)
Hold value key: yes
Lighting of measuring points: yes
Automatic shutdown: yes
AC alternating voltage: 1 mV - 600 V
DC voltage: 0.1 mV - 600 V
AC alternating current: 0.1 µA - 10 A
DC current: 0.1 µA - 10 A
Resistance: 0.1 Ω - 40 MΩ
Capacitance: 0.01 nF - 4000 µF
Frequency: 0.01 Hz - 10 kHz
Overvoltage category: CAT III 600 V; CAT II 1000 V
Power supply: 2x ref. LR3

Register to see prices 0.0 USD
PE adhesive tape, 25mm, 50m
is composed of an acrylic adhesive mass and a polyethylene support reinforced with a polyester canvas, this multi-purpose canvas tape tears easily by hand both vertically and horizontally, it unwinds regularly without winding effect. the adhesive, this outer tape is waterproof, withstands outdoor conditions for 8 weeks and no residue remains after removal, the canvas backing resists tool wear and allows the tape to remain intact, ensuring hassle-free removal , the color green is easy to spot on various surfaces, it offers a high immediate adhesion while being easily repositionable, the low thickness ensures maximum conformability, also on irregular surfaces, ideal for plastering and painting work. exterior (e.g. renovation of facades), temporary protection of window and door frames, window sills, facades, floor markings and other res sensitive surfaces, temperature resistant up to + 90 ° C, suitable for many other applications, eg. ex. for film fixing, cable assembly or marking
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD