also referenced under: OOMAOWELHJ02, 107.144

also referenced under: OOMAOWELPR02, CRM 3, 100.303

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

D100mm

also referenced under: OOMAVAPUCR10M, CRM 65

also referenced under: OOMAOVENCR50K, CRM 40

120 minutes

also referenced under: OOMAOVENCR50I, CRM 29

These sealants replace hemp, sealing tapes, and pastes, they are resistant to gases, liquids, air, water, oils, hydrocarbons and many chemical products. Complete surface contact ensures a 100% seal. Unscrewing, or correction of position during assembly can be performed using conventional tools at any time before the sealant hardens. No sealant residues to block filters and valves.
The stick with pasty sealant is economical in consumption, no drips after use.
Application:
Improved bonding of suckers.
Note:
Before applying sealant, clean the threads with general-purpose cleaner
Labelling of hazardous substances: GHS07 Caution
Content of stick: 19 g
Colour of sealant: orange
minimum break-away torque: 5.8 N·m
Temperature range: -55 °C - 150 °C
for thread size M to: M80
for imperial thread size: 3 inch
Strength for disassembly: low
fluorescent:no

also referred as: OOMAOPRECR75T, CRM 76

FUNCTION: Programmer, Controller
DIMENSIONS: 48 x 48 mm
DISPLAY: 1 display with 4 digit
POWER SUPPLY: 24 Vac/Vdc, 100… 240 Vac
INPUTS: 0/1… 5 V, 0/2… 10 V, 0/4… 20 mA, Pt100, PTC-NTC, Thermocouple
OUTPUTS: Relay and/or SSR control
DIGITAL INPUTS: 1, 2
INDEPENDENT TIMER: Yes
NUMBER OF PROGRAMS / SEGMENTS: 1 program with 8 segments
INTERFACE: TTL Modbus
SPECIAL FUNCTIONS: Digital retransmission, Hours/Days worked, Power on delay, Soft start, Transmitter power supply, User calibration, Wattmeter
CONTROL: ON/OFF and PID single or double action
EXTRACTABILITY: By the front
CERTIFICATIONS: CE, UL

Specially parameterized for CR5000G

also referenced under: OOMAOVENCR50RG, CRM 46, K48

also referenced under: OOMAOVENTHERDIG, CRM 53

also referenced under: OOMAOVENTERMO, CRM 47

ENP 220, spare part

also referenced under: OOMAOVENCR50FT, CRM 28

ENP 360°, spare part

also referenced under: OOMAOVENCR50O, CRM 43

D100, L260mm

3 positions

also referenced under: OOMAOVENCR50S, CRM 30

2 positions

also referenced under: OOMAOVENCR55003, CRM 30.1

D100mm

also referenced under: OOMADUSTAS04, CRM 107.2

Stainless Steel

Stainless Steel

Features and applications:
- GN 227.7 stamped steel handwheels have high mechanical strength and coating for increased corrosion resistance.
- They are also shock and impact resistant.
- The tapered square hole facilitates installation and proper positioning on a pin.
- Molded shape prevents injury from sharp edges when handling.
- Handwheels are stamped “SHUT” and “OPEN” for safe and correct valve handling.

Suitable for:
Wire cable cutter

230V / 1550W

also referenced under: OOMAOWELPR01, CRM 2, 142.717

Wire cross section: 16 mm²
Coupling plug wire cross section: 25 mm²
Coupling plug arbor: 9 mm
Earth clamp: 200 A
Length cable approx: 4 m

also referenced under: EMACWELDWMCG, CRM 21

260 A- 35% ED / electrodes max. 3.2 mm
Insulated according to EN 60974-11 with break-proof insulating shells made of glass-braided material for Allen cable lug connection

also referenced under: EMACWELDWMEH, CRM 22

DIN 894, size 36mm

for aspirator hose

3 positions

for 2 years maintenance

also referenced under: OOMAVAPUCR11, CRM 56.1

W=19mm / L=33m

optional oven equipment

also referenced under: OOMAOVENCR50T, CRM 39

D 60 mm, 0-250 bars

1m x 10m

also referenced under: OOMAOVENTEFLON, CRM 55

resistant to almost all chemicals, non-combustible, embrittled, will not crack, become crumbly or sticky, quick and clean application, for trouble-free sealing of fine threads up to 3/8 inch for almost all fluids, application range from -240 ° C to +260°C

also referenced under: OOMAVAPUCR10T, CRM 68

⌀53mm

also referenced under: OOMAOPRECR75D1, CRM 71.9