• Hammers
  • Abrasive
  • Knives
  • Orthopedic tools
  • Scissors
  • Scewdrivers
  • Pliers
  • Wrenches
  • Files, Rasps
  • Saws
  • Drill bit
  • Measuring tools
Wire hand brush
3 lines

also referenced under: EMACWELDWMBR, CRM 20
Register to see prices 0.0 USD
Threaded holder, for edge cutter, M16
also referenced under: OOMAMARP3000F, CRM 95
Register to see prices 0.0 USD
Strawberry rasp, medium, diameter 45mm, length 110mm
also referenced under: ETOORASP4511, CRM 94.51
Register to see prices 0.0 USD
Spiral milling cutter, HSS, 27/70mm, M16
also referenced under: OOMAMARP3000E, CRM 94
Register to see prices 0.0 USD
Silicone grinding tools, 5pcs
For the final finishing of prosthetic components
1 piece silicone sanding cone 5/8", conical
1 piece silicone sanding cone 5/8", conical, narrow
1 piece silicone sanding cone 5/8", cylindrical round with grooves
1 piece silicone sanding cone 5/8", cylindrical round
1 piece silicone sanding cone 5/8", double cone
1 stand
Register to see prices 0.0 USD
Silicone grinding tools, 5/8" cylindrical round with grooves
For the final finishing of prosthetic components
Register to see prices 0.0 USD
Silicone grinding tools, 5/8" conical
For the final finishing of prosthetic components
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Sanding drum, rubber surface, Ø90mm
also referenced under: OOMAMARP3000H, CRM 97
Register to see prices 0.0 USD
Sanding drum, rubber surface, Ø60mm
also referenced under: OOMAMARP3000I, CRM 98
Register to see prices 0.0 USD
Sanding drum with conical hole
Ø72.5 x 200mm

also referenced under: EHDWSANQD072, CRM 483
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Sanding cap, ∅65, grit 40
also referenced under: OOMAMARP749Y145, 749Y10=A65
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Sanding Drum, conical, Ø22/36 mm, M16, length 60mm
also referenced under: EHDWSANQCA05, CRM 480
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Rough grinding disc “2 in 1” 230X8 mm
The grain, the binder, the abrasion-enhancing additives and the trimming disk reinforcement offer optimal abrasion performance and their service life depends on the different areas of use.
Disc to be deburred for steel and stainless steel with long service life and high abrasion capacity.
Maximum rotation speed: 80 m / s
⌀ bore: 22,23 mm
Max rotation speed: 6 600 min-1
Thickness of disc: 8 mm
⌀ disc: 230 mm
Register to see prices 0.0 USD
Rasp milling tool, medium, Ø35x55mm, M16
for wood and foam

also referenced under: ETOORASP3505, CRM 94.5
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Rasp milling tool, fine, Ø35x55mm, M16
for wood and foam

also referenced under: ETOORASP3505, CRM 94.5
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Rasp milling tool, fine, Ø30x105mm, M16
for wood and foam

also referenced under: ETOORASP3010
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Rasp head, Ø50x100mm, M16, medium cut
for wood, hard foam and soft foam works, medium cut
Register to see prices 0.0 USD
Rasp head, Ø50x100mm, 5/8", medium cut
for wood, hard foam and soft foam works, medium cut
Register to see prices 0.0 USD
Register to see prices 0.0 USD
Rasp Head Ø30x85 mm, M16, fine cut
for wood, hard foam and soft foam works
Register to see prices 0.0 USD
Polishing wheel, Ø200mm
also referenced under: OOMAMARP3000J, CRM 99
Register to see prices 0.0 USD