2x1100x1100mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

12x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
OPLAEVAFLIV12
74-00830

6x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
OPLAEVAFLIV06
74-00829

3x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
OPLAEVAFLIV03
74-00828

12x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
OPLAEVAFERA12
74-00833

10x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

6x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
OPLAEVAFERA06
74-00832

4x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

3x950x950mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A
OPLAEVAFERA03
74-00831

2x1000x1000mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

1000x1000x10mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

1000x1000x6mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

1000x1000x5mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

1000x1000x4mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

1000x1000x3mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

1000x1000x2mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

100pc

100pc

100pc

25m

Small model for 15mm and 25mm straps dim : 140m x 50 mm
Large model for 25mm and 38mm straps dim. 140m x 62mm
XXL Model for 38 mm and 49 mm straps dim: 140 x 74 mm

25m

50m

OSBOVSBO29

OSBOVSBO28

25m

Comprising : 1 blower, 120W, 1 electrical relay, housing, 2m electrical cable, pipe D 75mm/2m, 1 pipe collar D 75mm, 1 blowing nozzle, 1 nozzle holding bar L 880mm, 1 sheet metal collector, 1 flange D 100mm for aspirator connection

also referenced under: OOMADUSTAS01A, CRM 84.5

Swinging honing machine with funnel-type milling machine
All models we offer-ensure the highest efficiency, versatility and safety
All the models can be fitted with suction device
Weight: 100 Kg
Headphones mandatory (according to DIN EN 352)

380V, 1.2 - 1.7kW / 1400 - 2800 rpm

also referenced under: OOMAMARP3000, CRM 85

380V / 2.2 - 3kW / 1400 - 2800 rpm

also referenced under: OOMAMARPLB25, CRM 84.2

Sander with two telescopic booms on rubber contact rollers.
Power supply: 400 Volt
Belt: 50 x 2500 mm
Weight: 140 kg
Headphones mandatory (according to DIN EN 352)

400W / 1.27kW

also referenced under: OOMAMARPDB01, CRM 91

380V, 1.25kW / 1.7kW
with dust collector

380V, 1.27 - 1.7kW

also referenced under: OOMAMARPOL3500, CRM 89

- 100% Swiss made quality
- 60 years of expertise in making hot-air tools – brought together in the new SOLANO AT
- The sturdy, professional hot-air tool that weighs less than 1 kg/2.18 lbs
- Functional design: two-component handle grip and optimum center of gravity ensure ergonomic working
- Quick clean air filters
- Automatic carbon stop (collector protection) and heating element protection
Voltage V ~: 230
Power W: 2300
Temperature ° C: 500–650
Air quantity (20 ° C) l / min: 240
Dimensions (L × ∅) mm: 270 x 270 x 75 (45)
Weight: 750gr

- Closed-loop controlled temperature
- Open loop controlled air volume
- Intelligent «e-Drive» operating unit
- Ergonomic handling
- Modern design/ Swiss made
Power W: 1600
Voltage V~: 230
Temperature °C: 45 - 620
Air volume (20°C) l/min: 160 - 240
Size (L x ∅) mm: 335 × 90
Handle ∅ mm: 56
Weight kg: 1

The TRIAC ST from Leister is a handy heat gun, primarily used as a profiling tool for welding and processing plastic membranes. Additionally, it is used for professional welding, shrinking and molding various thermoplastics. The two-sided air filters of the TRIAC ST can be easily removed and cleaned. This ensures an optimal air supply and maximum performance. As a successor of the TRIAC S, the ST combines a new, highly robust engine with current technology and modern design in a handy heat gun.

Compared to the design of other heat guns, the proven bar-style heat gun enables welding above the head, on the floor and in narrow areas. The ergonomic, two-component handle and its optimized center of gravity provide an ideal grip, even for longer periods of use and under difficult conditions. When in use, the actively cooled, protective tube ensures continuous safety by protecting against burns. The carbon brake also protects the heat gun from overloading. The extensive range of accessories with over 80 attachment nozzles practically make this heat gun a universal device. The TRIAC ST is already the seventh generation of Leister’s revolutionary line of TRIAC hot air tools. Decades of experience packaged in a modern design, manufactured with Swiss quality: The TRIAC ST is a robust and reliable tool.

VOLTAGE: 100 - 230 V
FREQUENCY: 60 Hz; 50/60 Hz
POWER: 1500 - 1600 W
TEMPERATURE: 40 - 700 °C
AIR FLOW (20°C): 240 l/min
TEMPERATURE SETTING STEPLESS: Yes
STATIC PRESSURE: 3000 Pa
NOISE EMISSION LEVEL: 67 dB (A)
OUTDOOR USE: Yes
DISPLAY: No
ECO MODE: No
E-DRIVE: No
NOZZLE CONNECTION Ø: 31.5 mm / 1.25 in; M14
LENGTH: 338.0 mm
DEVICE DIAMETER: 90 mm
HANDLE DIAMETER: 56 mm
WEIGHT: 0.99 kg
PLUG: KR, 2 poles, 16A; CN, 2 poles, 10A; EU, 2 poles, 16A; JP, 3 poles, 20A; CEE yellow, 3 poles, 16A; JP, 2 poles, 15A; AU, 3 poles, 10A; UK, 3 poles, 13A; US, 2 poles, 15A, polarized; CH T11, 2 poles, 10A
POWER CABLE LENGTH: 3.0 m
CONFORMITY MARK: CE
SAFETY MARK: KCC; S+; UL
PROTECTION CLASS: II

also referenced under: OOMAOWELAIRT, CRM 1, 141.311

• 100% Swiss made quality
• Leister's smallest manual device
• Continuous electronic temperature control
• Continuous electronic adjustment of the air flow
• Quiet
• Integrated flexible foot
Voltage V ~: 230
Power W: 460
Temperature ° C: 40-600
Air flow (20 ° C) l / min: 40/110
Dimensions (L × ∅) mm: 235 x 70
Weight: 400gr

also referenced under: OOMAOWELHJ01, CRM 1.0, 100.688

230V/500W
High-end quality made in Switzerland

Welding mirror with Teflon coating and automatic temperature control. Suitable for indoor and outdoor use.

Diameter: 280mm
Weight: 3.0kg
Power consumption: 900 Watts / 230 Volts 50 Hz
Design: straight
Includes device stand.

also referenced under: OOMAOWELPR28, CRM 7, BARY A-2

Tough industrial soldering irons with Ersadur long−life soldering tips (30 times the working life of conventional copper soldering tips). Warm−up time 3 min. (for size 300, approx. 5 min.). Power cable 1.5 m rubber cable (PVC for size 30). With support stand (not size 30).
Powerful soldering iron for copper cables up to 6 mm2 cross section.
Soldering tip width: 5.3 mm
Heating power: 150 W
Soldering tip temperature after 3 minutes: 450 °C
suitable for copper cross sections up to: 6 mm2

also referenced under: OOMAOWELIE15, CRM 10, 0155JD

The most efficient oscillating machines, available in three power categories (SuperCut, MultiMaster, MultiTalent); new model with Starlock tool carrier (optimized power transmission for up to 35% faster working speed).
Almost unlimited applications (sawing, grinding, scraping, cutting, grating) thanks to the oscillating movement (low dust emission).
Electronic progressive adjustment of the rotation speed for optimal use.
Maximum quality and stability thanks to the metal gear case and the combined use of ball and needle bearings.
Optimal maneuverability thanks to the ergonomic design and the Softgrip coating, reduced weight.
Powerful MultiTool for rapid progress (for interior design and renovation) with more than 30 accessories for sawing in wood and metal, sanding, cutting tiles, etc.
Delivery:
Set of 30 accessories, 1 × suction device, 1 × plastic tool case.
Set of 30 accessories: 1 × E-Cut Long-Life saw blade - (10 mm), 2 × E-Cut Long-Life saw blades (35 mm), 2 × E-Cut Long-Life saw blades ( 65 mm), 1 × E-Cut Carbide Pro saw blade (32 mm), 1 × carbide saw blade (⌀ 75), 1 × carbide rasp (triangular), 1 × spatula, 1 × perforated backing pad , 1 × perforated sanding sheet each (grit 60, 80, 120, 180).
With 1 × ALG 80 rapid charger, 2 × Li-Ion batteries (18 V / 3 Ah).
1 “Akku” case with charger, 1 backing pad, 3 sanding sheets each (grain 60, 80, 120, 180), 1 fixed spatula, 1 HSS segment saw blade, 1 Long-Life E- saw blade Cut (65 mm), 1 E-Cut universal saw blade (44 mm).
Manufacturer no .: AFMM 18 QSL
Number of batteries included: 2
Battery type: Lithium-ion
Battery capacity: 3 A h
Battery voltage: 18V
Tool holders: StarlockPlus, Starlock
Number of oscillations: 11'000 min-¹ - 18'500 min-¹
Oscillation angle: 3.4 °
Angle approach of the support plate: 80 mm
Weight: 1.8 kg

Market-leading oscillating tools in three different performance classes (SuperCut, MultiMaster, MultiTalent) in a new version with Starlock tool arbor (improved torque transmission of up to 35 % greater rate of progression of the work).
Virtually unlimited application possibilities (sawing, grinding, scraping, cutting, rasping) due to the oscillating mode of movement (low generation of dust).
Stepless electronic speed control for optimum working.
Very high quality and stability thanks to the metal gearbox and use of ball bearings and needle bearings throughout.
Optimum handling due to ergonomic design with soft-grip inlays and low weight.
Supplied with:
1 toolbox set “QuickStart” containing:1 abrasive plate, 3 each abrasive discs (80, 120, 180 grit), 1 E-Cut universal saw blade (44 mm).
Packaging: Carrying case
Manufacturer's designation: MM 300 Plus Start
Power consumption: 250 W
Toolholder: StarlockPlus, Starlock
Speed of oscillation: 11,000 min-1 - 20,000 min-1
Amplitude (oscillation movement): 2 × 1.6 degrees
Weight: 1.4 kg
Cable length: 5 m
OOMAOSAWOS01

Effective delivery volume approx: 1000 l/min
Maximum Pressure: 10 bar
Pressure vessel capacity: 500 l
Air outlet: ¾ "
Length approx: 1980 mm
Width/depth approx: 700 mm
Height approx: 1630 mm
Weight approx: 307 kg
Absorbed power electric motor: 7.5 kW
Supply voltage: 400 V
Mains frequency: 50 Hz
Motor type: Electric
Sound pressure level Lp: 68 dB(A)

- Designed for demanding continuous use when oil-free and clean compressed air is required
- Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
- Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
- Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
- The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon
High-quality maximum equipment
- Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous dirt, oil and condensate separation
- One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
- Two comfort safety quick couplings
- High-quality CONDOR pressure switch
- One pressure gauge each for container and working pressure
- Simple condensate drain via ball valve
Compressed air lines and reservoirs with long service life
- Flexible armored hose line with heat protection prevents vibration fractures
- Inside and outside hot-dip galvanized, corrosion-protected compressed air tank with 15-year guarantee against rusting through
Comfort safety quick couplings
- One-hand safety couplings according to DIN EN 983 used as standard by AIRCRAFT as first manufacturer
- Two separate locking systems for maximum working safety
- No whipping of the hose line during uncoupling
Convenient transport
- Transport back-friendly in upright position and without lifting
- Additional transport handle directly on the container
- Puncture-proof PU foam wheels
- Stable steering chassis with parking brake
TÜV-free
- Type-tested by an approved monitoring body
- Recurring container inspections also possible by a competent person
Immediately ready for use
- Fully automatic on-off operation
- With all safety devices
- Completely ready for connection

also referenced under: AIRPROFI 440/100 OF PRO, EMACAIRCO380, CRM 178

- Designed for demanding continuous use when oil-free and clean compressed air is required
- Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
- Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
- Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
- The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon
High-quality maximum equipment
- Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous separation of dirt, oil and condensate
- One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
- Two comfort safety quick couplings
- High-quality CONDOR pressure switch
- One pressure gauge each for tank and working pressure
- Simple condensate drain via ball valve
Compressed air lines and reservoirs with long service life
- Flexible armored hose line with heat protection prevents vibration fractures
- Inside and outside hot-dip galvanized, corrosion-protected compressed air reservoir with 15-year warranty against rusting through
Comfort safety quick couplings
- One-hand safety couplings according to DIN EN 983 used by AIRCRAFT as the first manufacturer in series production
- Two separate locking systems for maximum working safety
- No whipping of the hose line during uncoupling
Convenient transport
- Transport back-friendly in upright position and without lifting
- Additional transport handle directly on the container
- Puncture-proof PU foam wheels
- Stable steering chassis with parking brake
Immediately ready for use
- Fully automatic on-off operation
- With all safety devices
- Completely ready for connection

also referenced under: AIRPROFI 220/50 OF PRO, CRM 178.3

This oil-free piston compressor is designed to provide clean and reliable compressed air for prosthetic and orthotic laboratories. The oil-free system eliminates the risk of oil contamination, ensuring safe use with thermoplastic materials, laminating processes and pneumatic equipment commonly used in P&O workshops.

The compressor provides stable air supply for daily workshop operations such as vacuum forming, thermoforming of plastics and operation of pneumatic tools.

Typical applications in P&O workshops
- Vacuum forming and thermoforming
- Operation of pneumatic tools
- Lamination processes
- General compressed air supply for orthopaedic workshops

Key features
- Oil-free piston compressor (clean compressed air)
- 2-cylinder compressor system
- Maximum pressure: 10 bar
- Air suction capacity: 240 l/min
- Filling capacity: 120 l/min (at 6 bar)
- Air tank capacity: 24 L

Electrical specifications
- Supply voltage: 230 V / 50 Hz
- Motor input power: 1.4 kW
- Motor power: 1 kW
- Duty cycle: 70 %

Noise level
- Sound pressure level: 62 dB(A) (measured at 1 m)

Dimensions & weight
- Length: 600 mm
- Width: 280 mm
- Height: 600 mm
- Net weight: 24 kg

Equipment
- Pressure regulator with automatic pressure switch
- Direct-coupled drive transmission
- Quick coupling air outlet
- Flexible armored compressed air line with heat protection
- Two transport wheels with solid rubber tyres

Sheet steel drawer units. Central closure by cylinder lock. Drawers with large aluminum handle bar and label holder, extendable up to 90%. Interior with notched walls for compartmentalization of drawers.
Established load capacity / table - Maximum load per compartment distributed over the surface (on the wood): 2,000 kg
Worktop thickness: 50 mm
Established height: 850 mm
Worktop material: Beech plywood
Usable width of drawers: 490 mm
Drawer cabinet depth: 630 mm
Usable depth of drawers: 520 mm
Width of drawer unit: 600 mm

Worktop 50 mm thick. Holes are provided for fixing drawers and legs.
Base in sturdy U-shaped steel profile. Drawer unit with 720 mm useful height and central closure. Equipped with 5 drawers (partial extraction).
Worktop in beech plywood, glued, waterproof. With colorless UV varnish.
Drawer units 600 mm wide in sheet steel with cylinder lock with 2 keys and central locking. Sheet steel drawer with large aluminum handle bar, extendable up to 90%. Designed for compartmentalization. The drawer units can be mounted on the right, left or in the center of the worktop. For a plan length of 1500 mm, possibility of mounting 2 - 3 boxes, for a plan length of 2000 mm, possibility of mounting 3 - 4 boxes (depending on the width of the boxes).
Legs in folded sheet steel (80 mm wide), with reinforcements.
Drawer units to be mounted on the right or on the left.
Front height of drawers: 60; 100; 140; 180; 240 mm
Colors: RAL 7035 light gray body and feet, RAL 5005 signal blue drawers, powder-coated. For other paintings, price on request.
Note (s): Delivery by separate elements, more economical. Delivery without assembly.
Established height: 850 mm
Allowable load of drawers / extendable shelves: 100 kg
Established load capacity / table - Maximum load per compartment distributed over the surface (on the wood): 1,000 kg
Worktop thickness: 50 mm
Drawer extraction (partial / total): 90%
Cylinder lock: Modular cylinder
Safety certificate: GS TÜV Süd
Worktop length: 1,500 mm
Worktop depth: 700 mm
Worktop thickness: 50 mm
Drawer cabinet height: 800 mm
Drawer cabinet width: 600 mm
Drawer cabinet depth: 630 mm
Usable width of drawers: 490 mm
Usable depth of drawers: 520 mm
Number of drawers: 5
Worktop material: Multiply beech
Worktop surface: colorless varnish