M16

Upholstery made of steel wires

Upholstery made of steel wires
ETOOFILEWIRB
74-00718

3 lines

also referenced under: EMACWELDWMBR, CRM 20, 74-01552

for wood and foam

for wood and foam

for wood, hard foam and soft foam works, medium cut

for wood and foam

for wood and foam

for wood, hard foam and soft foam works

for wood, hard foam and soft foam works, medium cut

for wood and foam

also referenced under: ETOORASP3010

also referenced under: ETOORASP4511, CRM 94.51

for wood and foam

also referenced under: ETOORASP3505, CRM 94.5

for wood and foam

also referenced under: ETOORASP3505, CRM 94.5

also referenced under: OOMAMARP3000E, CRM 94

also referenced under: OOMAMARP3000D, CRM 93

also referenced under: OOMAMARP3000I, CRM 98

also referenced under: OOMAMARP3000H, CRM 97

Thick cotton pad with abrasive grain of normal corundum

For the final finishing of prosthetic components

For the final finishing of prosthetic components

For the final finishing of prosthetic components
1 piece silicone sanding cone 5/8", conical
1 piece silicone sanding cone 5/8", conical, narrow
1 piece silicone sanding cone 5/8", cylindrical round with grooves
1 piece silicone sanding cone 5/8", cylindrical round
1 piece silicone sanding cone 5/8", double cone
1 stand

also referenced under: OOMAMARP3000F, CRM 95

also referenced under: OOMAMARP3000J, CRM 99

made of premium steel, forged, hardened and sharpened, concave ground cutting edge, PVC blade guard, blade length 240mm, blade width 30mm, weight 400g
74-00711, 718H12

74-01204

The black blade ‑ Lutz® multisharp, premium hardened blades with ultra-sharp ground edges.
Extra-fine and ultra-sharp ground blade.
Blade length: 100 mm
Blade width: 18 mm
Blade thickness: 0.5 mm
Number of snap-off points: 8
Number of blades: 10

Mango de madera

Multimatized handle with grip zone optimized for torque and comfort
74-01212

ETOOFILEYRBL

for widening holes, shaping or planing concave surfaces, very ideal for turner work, yellow plastic handle, black hand rest (can be disassembled)
74-01755

ETOOFILEYSHB

for hardwood, softwood, vinyl, nylon, plaster, chalk, chipboard, linoleum, rubber, thermalite, fiberglass

ETOOFILEYSSB, 716Y1

ideal tool for file work, black metal body, sturdy yellow plastic handle
74-00888

With sharp drill point, pre-drilling not necessary. Conically increasing cutting edges and radially relief ground circumference for a paring cut. With scale in the flutes. Three drive flats on the shank.
Set of 3 conical sheet and tube drills and 1 cutting compound No. 118160 in a case.
Leaves no burr or chatter marks.
Sheet metal 0.1 − 2 mm, stainless steel 0.1 − 1 mm, non-ferrous metals: 0.1 − 5 mm, plastics up to 10 mm.
1x each taper sheet and tube drill: Size 3 -14; 8 − 20; 16 − 30.5

Countersink sets, in a case.
Practical set for assembly and workshop use.
Content table use:
1× each countersink: Size 6; 8; 10; 11.5; 15; 19
Number of countersinks: 6
Countersink tip angle: 90 degrees
Tool material: HSS
Number of cutting edges Z: 3

HSS, 19 pieces, D 1 to 10mm by step of 0.5mm

HSS, 25 pieces, D 1 to 13mm by step of 0.5mm

Strong head, laid-on joint. Jaws chemically blacked, polished head, plastic coated handles. Cutting edges induction hardened (approx. 61 HRC).
Standard: DIN ISO 5748
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 180 mm
Cutting capacity soft wire up to ⌀4 mm
Cutting capacity hard wire up to ⌀2.5 mm
ETOOPLIEDAC180

Strong head, laid-on joint. Jaws chemically blacked, polished head, plastic coated handles. Cutting edges induction hardened (approx. 61 HRC).
Standard: DIN ISO 5748
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 200 mm
Cutting capacity soft wire up to ⌀4 mm
Cutting capacity hard wire up to ⌀2.8 mm

Serrated jaws. Cutting edges additionally induction hardened (approx. 64 HRC); suitable even for piano wire.
Jaws bright finished, plastic coated handles.
Standard: DIN ISO 5746
Material: Chrome vanadium steel, drop forged.
overall length: 160 mm
Cutting capacity hard wire up to ⌀: 2 mm
Cutting capacity piano wire up to ⌀: 1.5 mm
Jaw characteristics: inner face serrated
Handle: plastic coated
Manufacturing process: Cutting edges induction hardened (approx. 64 HRC), pliers body drop forged
Material: Chrome vanadium steel
ETOOPLIEUN160EC
74-00871