Polycentric Knee Joint 6H09А is intended for patients with low or moderate level activity. The joint is used in hip prosthesis for transfemoral amputation, including transfemoral disarticulation.
Maintenance-free needle bearings used on all axes of joint ensure high reliability and increasing resource of knee joint.
The kinematics of the joint allows functional shortening of prosthesis up to 15 mm during swing phase. Knee Joint 6H09А has adjustable extension assist.
Activity level: М1, М2
Maximum flexion angle: 135°
Maximum weight of patient: 100kg
Material: Aluminium alloy
Weight: 460g

Single Axis Friction Knee Joint 6H02 is intended for patients with low and moderate activity, unilateral and bilateral amputations or disorder of support function of retained lower limb.
At angles of flexion up to 15 ° the further flexion of joint is blocked under the load that provides a secure stance phase.
The joint is fully released when unloaded, wherein the joint becomes movable again.
There is an adjustable extension assist with weight 60g.
Friction bearings of modern polymer material used in the knee joint provide the smoothness and compensate side play.
Activity level: М1, М2
Maximum flexion angle: 120°
Material: Stainless steel/Titanium
Maximum weight of patient: 125kg/150kg
Weight: 680g/480g

Blister-forming Set for BK and AK prostetic socket production. The set includes a Blister-forming tray with two plates (D=320mm and D=265mm) and a vacuum-table with fitting silicone-rings and assembly material.

Polycentric Knee Joint 6H01 is intended for patients with low and moderate activity.
The joint is used in hip prostheses for patients with above the knee amputations, including transfemoral disarticulation.
The kinematics of joint allows to achieve a functional shortening of the prosthesis in the swing phase.
Adjustable flexion — extension assist improves control of swing phase.
Ball bearings used in the knee joint do not require maintenance and ensure high reliability and increasing resource of knee joint.
Activity level: М1,М2, М3
Maximum flexion angle: 135°
Maximum Weight of patient: 125kg/150kg
Material: Stainless steel/Titanium
Weight: 673g/470g

Ständer zur Förderung der Feinmotorik, der Hand-Auge-Koordination und der kognitiven Fähigkeiten.
Dieses Werkzeug besteht aus einer kleinen, praktischen Holzkiste, die leicht zu verstauen ist. Einzelne Teile wie Schraubendreher, Gabelschlüssel, Inbusschlüssel oder Schrauben können in den dafür vorgesehenen Fächern aufbewahrt werden. Dieser Ständer und sein Zubehör entsprechen den aktuellen europäischen Normen EN71/CE (Sicherheitsspielzeug).

Abmessungen:
L x B x H: ca. 19,0 cm x 8,5 cm x 3,5 cm
Gewicht: ca. 488 g

Ziele:

Feinmotorik
Pinzettenaktivität
Distale Beugung
Inhalt:

2x Inbusschlüssel in zwei verschiedenen Größen
1x Gabelschlüssel
1x Schraubendreher mit Kreuz- und Schlitzaufsatz
1x Rändelschraube mit Sternenknauf
1x Ringschraube
1x Flügelmutter
1x Kreuzschlitzschraube
2x Sechskant CAN-Schrauben
1x Schlitzschraube
1x Gewindestift
1x Mutter
1x Hutmutter