FEATURES
- Complete drive shaft with bayonet connection
- Abrasive ring diameter 100x90mm length 283mm
- Integrated vacuum cleaner and external fabric filter

MACHINE DIMENSIONS
- Width 540mm - Depth 410mm - Height 440mm - Weight 34 Kg

POWER SOURCE
- Single phase 230V - 1ph - 50Hz

D 325/L 600mm

Equipment Pair of feet that can be driven in, with levelling feet, adjustable head section, lying surface made of 70 mm thick padding, chrome-plated square tubing
Dimensions WxDxH 650 x 1,950 x 650 mm
Material Synthetic leather cover
Weight 34 kg
Cover colour Classic silver-grey

Version Mirror, mobiler
Equipment With rear panel, chrome plated frame, tilting
Dimensions WxH 52 x 144 cm
Overall height 165 cm

Bars length: 300 cm
Very thin 1.5 cm base
Base width: 60 cm
Ramps and telescopic supports in epoxy steel.
Characteristics:
Weight: 49 kg

mechanical column scale with eye-level beam
the construction of steel and cast iron makes it extremely stable
high capacity of 220 kg
fine graduation of 100 g
reset-to-zero function
transport castors

5 steps of 9,5 cm - tilt: 18° - long flight for modular stairs type "Standard"

The single elements of these modular stairs can be coupled in order to meet the requirements of various difficulties of exercise and space availability. Closed steps and non-slip footboard inserts increase safety.

With the long and short flights, combined with a platform or a support for two flights, you can create several bridge-like structures.

width steps: 57 cm - height of the handlebars: 93 cm

- Designed for demanding continuous use when oil-free and clean compressed air is required
- Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
- Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
- Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
- The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon
High-quality maximum equipment
- Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous separation of dirt, oil and condensate
- One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
- Two comfort safety quick couplings
- High-quality CONDOR pressure switch
- One pressure gauge each for tank and working pressure
- Simple condensate drain via ball valve
Compressed air lines and reservoirs with long service life
- Flexible armored hose line with heat protection prevents vibration fractures
- Inside and outside hot-dip galvanized, corrosion-protected compressed air reservoir with 15-year warranty against rusting through
Comfort safety quick couplings
- One-hand safety couplings according to DIN EN 983 used by AIRCRAFT as the first manufacturer in series production
- Two separate locking systems for maximum working safety
- No whipping of the hose line during uncoupling
Convenient transport
- Transport back-friendly in upright position and without lifting
- Additional transport handle directly on the container
- Puncture-proof PU foam wheels
- Stable steering chassis with parking brake
Immediately ready for use
- Fully automatic on-off operation
- With all safety devices
- Completely ready for connection

also referenced under: AIRPROFI 220/50 OF PRO, CRM 178.3

Equipment: Double doors, centrally locking, security lock, 4 height-adjustable slotted shelf inserts
Dimensions WxDxH: 950 x 400 x 1,950 mm
Material: Steel sheet
Depth: 400 mm
Weight: 75 kg
Colour: Light grey (RAL 7035)

220V power supply. Dimensions: 45 x 40.5 x 16 cm
Based on the prince of light transmission for optical fiber, the assembly of the platform was developed by the equal and sees the image reflected on the interior mirror support. The quality of the bending and contact rendering allows you to obtain precise diagnoses. Very robust (15 mm thick acrylic glass), this podoscope also has a modern and elegant design

230V, Volume 6, m³/h, Vacuum 60mbar

Workbench in sturdy steel construction. 50 mm wide base with reinforcement. Feet with non-marking plastic glides. With 1 pair of gussets to ensure rigidity. 16G drawer unit with central locking by cylinder lock. Full extension drawers with differential slides and load capacity of 75 kg.
Workbench height: 850 mm
Permissible load of drawers / extendable shelves: 75 kg
Permissible work bench / table load - Maximum load per rack distributed over the surface (on the wood): 400 kg
Worktop thickness: 50 mm
Drawer extraction (partial / total): 100%
Usable drawer surface in G: 12 × 20
Worktop length: 1,500 mm
Worktop depth: 750 mm
Height of drawer unit: 300 mm
Width of drawer unit: 400 mm
Depth of drawer unit: 650 mm
Useful height of drawer unit: 225 mm
Useful width of drawers: 300 mm
Useful depth of drawers: 500 mm
Number of drawers: 2
Weight: 82 kg

on rolling stand in white epoxy
Very strong, the mirror and expanded agglomerate form a single block, thus guaranteeing the maximum solidity.
U-shaped frame, with a minimum weight
Even in case of holes, mirror fragments adhere to the agglomerate backing for increased safety.
dimensions: 100 x 170 cm

electronically controlled heating bath for preparation of paraffin and fango

Features:
- capacity of 28 litres
- works according to the "in a double saucepan" principle
- stainless body with control panel in front
- thermostat - pilot lamps - indication of temperature
- sterilisation is possible at 90°C
- operating temperature: 50 - 65°C
- dimensions: 60 x 37 x 29 cm
- 230V~ 50/60Hz - consumption: 800 W - CE

• steel structure, galvanized finish

Its sturdy metal frame and the thick material used, combined with the weighted baseplate, make this highly stable.
The baseplates have been designed to be as close to the floor as possible to make it easy for the user to access the walking area.
Height is adjustable (45-66 cm) via pins concealed in the upper columns. Folds away easily.
Chrome and polyester finishing.
Length: 250cm Width: 50cm

• SOFT FOAM: Child-friendly materials provide you with peace of mind and your child with a soft, low-impact surface to toddle, tumble, and play.
• EASY MAINTENANCE: Lightweight blocks resist stains and wear, thanks to an easy-to-clean vinyl surface that wipes clean with a damp cloth.
• CERTIFIED & SAFE: Enjoy quality play with low-emission, child-friendly materials in accordance with federal safety standards.
• CHILD DEVELOPMENT: Bright, multi-colored surface and shapes stimulate your child's attention and promote the development of their gross motor skills, coordination, and color recognition.
• 5-PIECE SET: Watch as your child stacks and swaps five different shapes to create a tiny track to climb and crawl across for hours of fun.
• PRODUCT DIMENSIONS: Cylinder: 8" (Dia) x 17" (H) Small Rectangle: 8.5" (L) x 8.5" (W) x 16.25" (H) Triangle: 24" (L) x 16.25" (W) x 1.5"-8.5" (H) Large Rectangle: 16.25" (L) x 16.25" (W) x 8.5" (H) Half Moon: 16.25" (L) x 16.25" (W) x 8.25" (H)

• handrail in highly sturdy tulipwood.
• 140kg (2x70) safe workload
• 15mm stand thickness
• 53 kgs weight
• no decking required
• Ideal for limited available space
• Length: 300 x 65 x 75 Δ 108 h cm

for corner construction with two flights - for short or long flights - type Standard or Plus

for warming up fango or paraffin

Features:
- entirely made in stainless steel 18/8
- the contents of the heater is warmed up and kept at temperature by a liquid or oil in the double wall
the “in a double saucepan” principle ensures a homogeneous and stable temperature - no overheating or destruction of the product
the rectangular form provides an excellent stability
- capacity for 12 kg of fango or paraffin
- operating temperature: 50 - 65°C
- dimensions: 39 x 41 x 23 cm
- 230V~ 50/60Hz - 1170W - CE

3/8" - DN10, kit of 7 pieces

also referenced under: OOMAOPRECR75B, CRM 76.1

3 steps of 16 cm - tilt: 29° - short flight for modular stairs type "Standard"

The single elements of these modular stairs can be coupled in order to meet the requirements of various difficulties of exercise and space availability. Closed steps and non-slip footboard inserts increase safety.

With the long and short flights, combined with a platform or a support for two flights, you can create several bridge-like structures.

width steps: 57 cm - height of the handlebars: 93 cm

Casings and doors made of 0.9 mm sheet steel, shelves can be accommodated in steps of 40 mm. Reinforced doors internally and lockable by a sliding handle with cylinder lock. Complete with 4 shelves in galvanized sheet metal.
RAL 7035 light gray body, RAL 7016 anthracite doors, powder coated.
Cylinder lock
Allowable load interior cabinet body: 500 kg
Permissible shelf load / Maximum load per rack distributed over the surface (on the metal): 80 kg
Width: 950mm
Depth: 430mm
Height: 1950 mm

This new 4-section pressure therapy unit for daily well-being is especially suitable for solving circulation problems and the imperfections caused by cellulite and water retention in the most difficult areas. It is supplied with 2 leg garments and 1 belly garment. The applications of Farma Press Digital are numerous: anti-cellulite, lymphatic drainage, venous drainage, swelling of the extremities, post-surgical edema, lymphoedema, reduces fluid retention, venous insufficiency.
Technical Features
· Pressure: adjustable from 30 to 250 mmHg
· Output channels: 4
· Timer: 10, 20 or 30 minutes
· 3 compression modes: alternative, compressive and sequential
· Remote control
· Dimensions: L 110 x W 250 x H 180 mm
· Total weight (instrument + accessories): 4 kg
· IP rating: IP20
· Safety class: class II type BF
· Mains supply: 230V~ 50Hz

- Industrial engine
- Easy to use safety switch according to IP 54
- Digital drilling depth and speed indicator integrated in the housing
- Separate emergency stop impact switch
- Precision Spindle bore
- Safety electronics in 24 V DC
- Guaranteed concentricity measured less than 0.02 mm in the drill quill
- Drill spindle with precision ball bearings
- High quality keyless chuck
- Depth stop
- Precision machined, stable drill table with diagonal T-slots and circumferential cooling water channel
- V-belt cover with safety switch
- One piece cast aluminum die-cast quill lever with softgrip handles
- Large, height-adjustable protective screen with safety switch
- Heavy version of the entire machine

also referenced under:: OPTIdrill D 23Pro (230 V), EMACDRILC150, CRM 158

• Bobath therapy treatment table
• Fire-retardant padding and covering class 1IM,
washable
• Safe working load 160 kg
• dimensions 200 x 100 x 50 h cm

wall model
equipped with 4 arms of 130 cm and 4 arms of 110 cm
non-slip grip
adjustable height and variable resistance
dimensions: 132 x 25 x 200 cm

Accessories for 758Z116=1750 Lamination workstation
2x roll holder for subsequent installation in bench-top cabinet

strong and stable 2-section fixed height massage couch
headpiece is movable to 75°
adjustable foot for uneven surfaces
color: dark blue
height: 75 cm
dimensions: 65 x 195 cm

The stable sheet metal construction of the roller cabinet includes an ABS tray and push handle. Drawer unlocked by lifting the drawer.
Placement:
Drawer front height: 60; 60; 60; 120; 120; 120; 180 mm
Supplied with:
Dividing material. 12 divider partitions 410 mm.
Colour:
Two-tone powder-coated. RAL 7035 light grey combined with RAL 7016 anthracite grey.
Drawer/pull-out shelf load capacity: 15 kg
Drawer runner extension (partial/full extension): 75 %
Hoffmann perforated panel grid interval: 9×9 mm
Cylinder lock: modular lock barrel
Height: 1,005 mm
Width: 720 mm
Depth: 450 mm
Drawer usable width: 530 mm
Drawer usable depth: 410 mm
Number of drawers: 7
Weight: 50.3 kg

synthetic material
covered with vinyl upholstery
exercises in standing and lying position
dimensions: 175 x 75 x 15 cm

Length approx: 280 mm
Width/depth approx: 125 mm
Height approx: 140 mm
Weight approx: 2.3 kg
Supply voltage: 230 V
Mains frequency: 50/60 Hz
Electrode: 4.2 kVA
Electrode: 5 – 150 A
TIG DC: 5 – 150 A

also referenced under: OOMAOWELMA01, CRM 11, PRO-STICK 161

Ergometer: 350W - Monitor: 5.5" backlit color LCD - Brake: Servomotor-controlled magnet - Rotating mass: 11 kg
Almost all Tunturi trainers can be connected to your tablet or smartphone. Check your social media, read your emails, or watch your favorite show during your workout.
Even better, use the many available applications. Cycling in Paris, Amsterdam, or the routes of the Tour de France (including the ascent of Alpe d'Huez!), you can do it at home, in the gym, or in a sports or rehabilitation center. Realistic, fun, and challenging. You even have the opportunity to explore your next vacation. Plus, you can track your training results in real-time.

Features:
- Monitor: 5.5" backlit color LCD
- Programs: 1 manual - 4 novice - 4 advanced - 4 athletic - 4 pulse - 1 watt - 1 recovery - 1 body fat
- Resistance levels: 32
- Languages: English
- Watt program: 10-350 in 5 steps
- Braking system: Servomotor-controlled magnet
- Rotating mass: 11 kg
- Resistance: 350W
- Pedals: Comfort
- Power supply: 9V / 1A adapter
- Maximum user weight: 135 kg
- Dimensions: 99 x 60 x 158 cm
- Weight: 38.7 kg
- Adjustable monitor
- Handlebar: Multigrip, adjustable angle
- Saddle type: Comfort
- Saddle adjustment: Height - horizontal
- Manual heart rate sensor
- Telemetric heart rate receiver
- 5 kHz chest strap: optional
- Bottle holder
- Transport wheels
- Bluetooth
- Apps for smart devices (Android & iOS): i-Console+, Fit HiWay, Kinemap
- Tablet holder

Casings and doors made of 0.9 mm sheet steel, shelving possible in 40 mm steps. Doors reinforced internally and lockable by a sliding handle with cylinder lock.
With hinged doors with viewing window (polycarbonate lenses).
Permissible shelf load / Maximum load per rack distributed over the surface (on the metal): 60 kg
Allowable load internal cabinet body: 500 kg
Door opening angle: 225 degree
Height: 2000 mm
Width: 1000 mm
Depth: 400mm
Useful height: 1,840 mm
Number of shelves: 4

220V / 50Hz / 0,2 kW
Teflon coated as protection, range of regulation: 100-180°C
with stand and 1,40m cable

Oscillating plaster saw. Power : 500 W.
From 6.500 to 24.000 oscillations/minute.
Weight : 1.528 kg.
Supplied with 2 blades : Ø 50 and Ø 65 mm for natural plaster.

Including; 10m aspirator flexible hose, 1x reduction, 20x clamp, 3x T-connector, 5x straight connector, 9x wall clamp, 3x butterfly valve, 1x silicone sealant cartridge, 1x silicone gun, 1x rubber tape

Integral stainless steel worktop with wooden reinforcement
Integral chrome steel design
Height adjustable feet
Item delivered in spare parts to assemble yourself
Working height 850 mm
Large load capacity
Particularly high stability
Square feet profile
Easy cleaning
Dimensions (W x D x H): 1800 x 700 x 850 mm

also referenced under: OOMAMARP3000M, CRM 88

Ø360mm

Heating: 1x 2400W, 1x fan motor, heating active light
Thermostat: infinitely up to 250°C
Timer: infinitely 0 - 120 minutes, On/Off active light
Housing: Stainless steel, inside and outside, door with large viewing window, opens down to the front, double side bouncy supports
Accessories: 1 grill, 1 tray, standard
Power supply: 230V / 50Hz / 2,5 kW
Dimensions: outside: W 527 x D 450 x H 316 mm / inside : W 404 x D 308 x H 254 mm
Weight: 20 kgs

For medical examination, therapy and massages
Manual rack-and-pinion adjustment of head section
• Foam in bidensity: T35/PK40
• Safe working load: 140 kg
• Dimensions: 202 x 82 x 68 h cm

The most efficient oscillating machines, available in three power categories (SuperCut, MultiMaster, MultiTalent); new model with Starlock tool carrier (optimized power transmission for up to 35% faster working speed).
Almost unlimited applications (sawing, grinding, scraping, cutting, grating) thanks to the oscillating movement (low dust emission).
Electronic progressive adjustment of the rotation speed for optimal use.
Maximum quality and stability thanks to the metal gear case and the combined use of ball and needle bearings.
Optimal maneuverability thanks to the ergonomic design and the Softgrip coating, reduced weight.
Powerful MultiTool for rapid progress (for interior design and renovation) with more than 30 accessories for sawing in wood and metal, sanding, cutting tiles, etc.
Delivery:
Set of 30 accessories, 1 × suction device, 1 × plastic tool case.
Set of 30 accessories: 1 × E-Cut Long-Life saw blade - (10 mm), 2 × E-Cut Long-Life saw blades (35 mm), 2 × E-Cut Long-Life saw blades ( 65 mm), 1 × E-Cut Carbide Pro saw blade (32 mm), 1 × carbide saw blade (⌀ 75), 1 × carbide rasp (triangular), 1 × spatula, 1 × perforated backing pad , 1 × perforated sanding sheet each (grit 60, 80, 120, 180).
With 1 × ALG 80 rapid charger, 2 × Li-Ion batteries (18 V / 3 Ah).
1 “Akku” case with charger, 1 backing pad, 3 sanding sheets each (grain 60, 80, 120, 180), 1 fixed spatula, 1 HSS segment saw blade, 1 Long-Life E- saw blade Cut (65 mm), 1 E-Cut universal saw blade (44 mm).
Manufacturer no .: AFMM 18 QSL
Number of batteries included: 2
Battery type: Lithium-ion
Battery capacity: 3 A h
Battery voltage: 18V
Tool holders: StarlockPlus, Starlock
Number of oscillations: 11'000 min-¹ - 18'500 min-¹
Oscillation angle: 3.4 °
Angle approach of the support plate: 80 mm
Weight: 1.8 kg

color: blue - Ø 50 cm - length: 90 cm

the ideal exercise help for proprioception by children

composed of a hard foam-rubber core skin coated
soft, innocuous and integrated upholstery
urine resistant - easy to clean

• 100% Swiss made quality
• Leister's smallest manual device
• Continuous electronic temperature control
• Continuous electronic adjustment of the air flow
• Quiet
• Integrated flexible foot
Voltage V ~: 230
Power W: 460
Temperature ° C: 40-600
Air flow (20 ° C) l / min: 40/110
Dimensions (L × ∅) mm: 235 x 70
Weight: 400gr

also referenced under: OOMAOWELHJ01, CRM 1.0, 100.688

Welding mirror with Teflon coating and automatic temperature control. Suitable for indoor and outdoor use.

Diameter: 280mm
Weight: 3.0kg
Power consumption: 900 Watts / 230 Volts 50 Hz
Design: straight
Includes device stand.

also referenced under: OOMAOWELPR28, CRM 7, BARY A-2