Square drive: 3/8 in
Total length: 200mm

Hacksaw frame with all-steel back. Alternative blade setting at 90° for flush cutting. Plastic handle. Overall length 520 mm.
The bow saw with its prominent bow frame is characterised by the u-shaped bow which tensions the saw blades. The limitation in depth of cut of hand bow saws is presented by the distance from the blade to the bow. This frame shape permits the use of particularly slim saw blades, which in other frame shapes would be liable to buckle when subjected to cutting movements with the force in alternate senses or other than in the pulling sense. Thanks to the thin hacksaw blades the metal cutting effort required is reduced, because of the small cutting width. Thus this type of saw is the classic standard for hacksaw work in metalworking.

With hickory handle ergonomic shape, varnished.
Hammer head drop forged and ground to size. Carefully hardened and tempered. Head painted, face and peen bright finished.
With nylon handle protection sleeve. Size 200−1000 additionally with forged-on handle protection collar.

With short strong jaws (round). Smooth jaws.
Jaws chemically blacked, polished head, plastic coated handles.
Standard: DIN ISO 5745
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 140 mm
Jaw length: 28 mm

thermo-moldable at approx. 90 - 130°C., approx. 35° Shore A, 1030x1035x2mm

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Two-jaw ratchet tool holder for clamping drive squares. Sliding handle with groove at each end for locking the stop ball. Chromed carrier block. Reversible left / right or fixed ratchet. All-steel model for high dynamometric load. Tool holders with exact concentricity and tight tolerances. Milled and induction hardened clamping jaws for high toughness and optimum surface hardness.
Suitable for tapping in difficult places.
For other sizes of taps and reamers, see the tables for the corresponding product groups.
Material: All steel
□ capacity: 2.6 mm - 5.5 mm
For hand taps DIN 352: M3 - M10
Total length: 85 mm

The lightweight welder's glove, material: premium cowhide / split leather 1.2 mm, resistant split leather cuff, controlled absence of harmful substances, length 35 cm, neutral pH for the skin, finger mobility: level performance 5, water vapor permeability: 13.1 m² / h, protection according to category 2, EN 388

also referenced under: EMACWELDWEGL, CRM 19

Straight hexagonal shank with ball point.
Kraftform handle made of impact-resistant plastic with integral soft zones. Blade of high quality tool steel, surface matt chrome-plated, black tips.

Light-weight headgear to allow use of a face protection visor in areas where head protection is not required. With foam padding and rotary lock for size adjustment. Angular adjustment of the visor

1000x1000x3mm, 15-18 Shore A

Chemical protective aprons GUNOVA.
Sturdy and resistant PVC apron. High tear resistance, very flexible and lightweight. Welded plastic eyelets for neck and waist tie bands made of polyester. Approved as a chemical protective garment according to EN 14605. Dimensions: 90×120 cm. Thickness: 0.3 mm.

-weights for wrists and ankles
-delivered by pair
-suitable for fitness exercises and endurance training at home
-made of neoprene
-reinforced with cotton ribbon
-adjustable velcro strap

Strengthened core taper.
With point geometry shape C.

The 3M™ GPT-020F double-sided tape is characterized by high moisture resistance, very high immediate adhesion, excellent shear strength, even at high temperatures, as well as good UV resistance.

4 stone drill Ø 5/6/7/8 mm
3 x screwdriver bits L = 25 mm PZ 2/2/2
75 x 3.5 x 30 screws: 25 pieces, 20 pieces 4.0 x 35, 20 pieces 4.0 x40, 10 pieces 5.0 x 50
90 plugs: 30 pieces ø 5 mm, 25 pieces ø 6 mm, 20 pieces ø 7 mm, 15 pieces ø 8 mm
Universal holder, magnetic.

Strong head, laid-on joint. Jaws chemically blacked, polished head, plastic coated handles. Cutting edges induction hardened (approx. 61 HRC).
Standard: DIN ISO 5748
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 180 mm
Cutting capacity soft wire up to ⌀4 mm
Cutting capacity hard wire up to ⌀2.5 mm

1335 x 13 x 0,65 mm, 6-10 teeth

Swiss precision needle files satisfy the highest demands for accuracy of shape, precision cut, removal rate and tool life. Cut length = 1/2 file length. Manufactured from special steel for precision files with high wear resistance (65-66 HRC). Precisely determined shapes, special cut angle and large selection of different cuts. High metal removal rate.
Overall length: 200 mm
Cross section: 6.5×2.0 mm

Small and handy, good cutting performance.
With adjustable natural varnished wooden handle. Can be clamped at any point on the frame. Frame solid nickel-plated steel square bar.
Supplied with: Including general-purpose saw blade for metal, aluminium, wood and plastic. Blade length 150 mm.
Blade length: 150 mm
Overall length: 310 mm

Sturdy design with long arms, made of tool steel. Points and measuring faces ground and hardened. Solid spindle with adjusting nut for quick and fine adjustment. Annular spring provides constant spring tension.
With replaceable tips.

Dimensions WxDxH: 850 x 500 x 1140mm
Weight: 83,000kg
Max. stitch length: 5mm
Sewing speed: max. 300 stitches
Needle system: 332 L LG, 332 LG
Footprint: 1000 x 750mm
max. presser foot stroke: 12mm

E14 / 25W / 300°C / 230V

also referenced under: OOMAOVENCR50BC, CRM 34

With hickory handle ergonomic shape, varnished.
Hammer head drop forged and ground to size. Carefully hardened and tempered. Head painted, face and peen bright finished.
With nylon handle protection sleeve. Size 200−1000 additionally with forged-on handle protection collar.

Made of stainless steel, with return spring.
Offset jaws, plastic coated handles.
Widely applicable. Ideal for thin sheet metal, plastics, leather, cardboard, paper, cord, fabrics etc.
overall length: 190 mm
Length cutter: 40 mm

For preparing models
For forming temporary dummies when there is no direct resin contact
Easily formable
Easy to apply, even on larger surfaces

Sturdy design with chamfered arms, tool steel, forged and precision ground. Riveted through joint hinge. Hardened and ground points.

Very long snipe nose jaws. Cutting edges induction hardened (approx. 61 HRC), suitable for hard and soft wire. Serrated inside jaws.
Pliers bright finished, plastic coated handles.
Standard: DIN ISO 5745
Material: Chrome vanadium steel, drop-forged and oil-hardened.
overall length: 200 mm
Jaw length: 73 mm
Jaw design: snipe-nosed, straight
Jaw characteristics: Cutting edges induction hardened (approx. 60 HRC)
Type of jaws: inner face roughened
Handle: plastic coated
Material: Chrome vanadium steel, drop-forged and oil hardened
Surface: bright finish

Material:
- cork-compact sheets

Application:
- for insoles and embeddings
- for height adjustments, shoe last modifications and volume adjustments of prosthetic sockets

Characteristics:
- light-weight
- bendable
- well grindable
- bonds well with contact glues

Strong pressed steel shanks with rotating wheel and lock. With 6 different hollow punches (⌀ 2.0; 2.5; 3.0; 3.5; 4.0 and 4.5 mm).
Use a soft material, e.g. leather, as an underlay to avoid damage when a lot of pressure is applied.

also referenced under: OOMADUSTAS03, CRM 107.1

1000x1000x4mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

With hickory handle ergonomic shape, varnished.
Hammer head drop forged and ground to size. Carefully hardened and tempered. Head painted, face and peen bright finished.
With nylon handle protection sleeve. Size 200−1000 additionally with forged-on handle protection collar.

1000x1000x3mm, 15-18 Shore A

Stainless Steel

Replacement wheel with needle bearing and quick-change axle.
Technical data
⌀ wheel 20 mm
Wheel width 6.2 mm
Roll bore 7.8 mm

With short strong jaws (flat). Serrated inside jaws.
Jaws chemically blacked, polished head, plastic coated handles.
Standard: DIN ISO 5745
Material: Special tool steel, drop-forged, and oil-hardened.
Type of jaws: inner face roughened
Jaw design: flat
Jaw length: 30 mm
overall length: 160 mm

L-form shaft to DIN ISO 2936 L, end faces squared and chamfered. Chrome vanadium steel, through hardened (toughened).
Surface manganese phosphated.
1 each L-wrench No. 626125: Size 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10
Storage in: Plastic clip

Ceramic bonded combination oilstones, hardness O/ P. One side coarse for roughing, the other side fine for finishing.
Special Aluminium Oxide 180 grit (medium) with long working life. Other side precision abrasive, 500 grit (very fine), very free cutting, high surface quality.
Application:
For deburring, finish smoothing of irregularities, rounding of edges.