Ideally equipped to handle virtually any task: High-performance DIY enthusiast set for precise, clean drilling in metal, masonry and wood, as well as high-grade screwdriver bits and nut setters for the most commonly used screw head types. Comes with a universal carpet knife.
Features & Benefits
11 metal drill bits, Ø 1.5-6.5 mm, with titanium nitride coating that excel through their fast drilling progress and particularly long service life (not suitable for use in aluminium).
6 robust carbide-tipped masonry drill bits, Ø 4-10 mm, that impress with their long service life, fast stock removal, low heat development and precision.
5 sharp wood drill bits, Ø 4-10 mm, with centring tip and shoulder cutter for precise, tear-free hole drilling, as well as 2 spade bits diameter 16/22 mm with titanium nitride coating.

11 HSS-TiN metal drill bits, Ø 1.5-6.5 mm
6 masonry drill bits, Ø 4-10 mm
5 wood drill bits, Ø 4-10 mm
2 spade bits, Titanium, Ø 16/22 mm
18 screwdriver bits, L=25 mm
PH 1/2/2/3
PZ 1/2/2/3
S 4/6/7
HEX 3/4/5/6
T 15/20/25
3 nutsetters, Ø 7/8/10 mm
1 diameter gauge
1 knife
1 adapter for nut setters
1 universal holder, magnetic
1 countersink

Bow made of oval, varnished steel tube with clamping lever. Saw blade made of original Swedish steel. With hardened tooth tips. Precision ground and exactly set.
Rip-toothed (HZ) 4 teeth before the raker − always sharp. For all types of wood, particularly green wood.
Tooth profile: Rip-toothed
Blade length: 760 mm
Blade height: 18 mm

Strong design, fully drop forged from steel. With screw joint and opening spring. Cutter edge hardness 64 HRC. Handles with light PVC coating.
For cutting wire ropes, multi-core cables etc.
Chrome vanadium special steel, oil-hardened.
overall length: 190 mm
for wire ropes/round mild steel bar: ⌀8 mm
for wire ropes (maximum 1600 N/mm2): ⌀5 mm
for round steel bar (maximum 1200 N/mm2): ⌀4 mm

Version:
Multi-purpose drill with especially sharp carbide insert for precise holes in different materials. Large-volume helical flute for quick removal of dust and chips. Shank of annealed special steel.
Application:
For drilling various materials, including in a single operation:
Bricks, porous concrete, lightweight materials, plastics.
Tiles, ceramics, marble, glass.
Metal and material combinations in a single operation, such as when fitting windows or when reinforcing concrete.
Content:
1 each drill Size. (⌀) 4; 5; 6; 6; 8; 8; 10
Note:
Caution: only for rotary use (without hammer action!)
Faster drilling and more holes per battery charge than with hammer drill bits.

with nail puller and countersunk tip, painted black, with nail holder, with tubular steel handle and steel ring for better protection of the handle, with plastic handle

240mm

To be used for functional plaster casting under weighted conditions
Dimensions WxDxH: 600 x 800 x 1.115 mm
Space requirements: 2,000 x 2,000 mm
Weight (net): 21 kg

for plaster casting under body load incl. base plate 145M21 and one casting ring set 145M22/S
mobile use with transport castors and -handle
space saving due to built-in folding mechanism
quick-adjustment lever provides even easier height settings of the casting apparatus in seconds
high quality, sturdy choice of material
exact adjustment options by means of crank handle

Technical data

space required: 2000 x 2000 mm
dimensions W x D x H: 900 x 600 x 1120 mm

Equipment 2x 743Y26 pressure blocks
Dimensions WxDxH 235 x 350 x 59 mm
Weight 2.8 kg
To be used for Plaster casting for hip/knee disarticulation patients

The casting table has been designed to meet the needs of all kind of prothetic patients, including lower extremity prostheses, hip and knee disarticulation prostheses.
The geared system and the ergonomic design enable the technician to adjust the height appropriately allowing the patient to comfortably stand upright while the measurements are taken.

OOMAALIGORTH

Center drill with radius type R

Strong octagonal shank, bright finished point. Uniformly through hardened over the entire length. Head specially annealed to prevent splintering.
Safety tested to DIN 7255.
Material: Chrome vanadium air hardening steel, painted. Head annealed.
overall length: 120 mm
Shank ⌀: 10 mm
Type of striking head: annealed
Material: Chrome vanadium air hardening steel
Surface: painted

Delivered with: 5 chisels, 1 spare spring
Air requirement average, approx: 240 l/min
Working pressure: 6.3 bar
Chuck: 10 mm
Stroke count: 2200 min¯¹
Impact strength: 9.5 J

Flat cold chisel: 1 pc. each 125; 150 mm
Cross-cut cold chisel: 1 pc. 125 mm
Taper pin punch: 1 pc. each size 120×2; 150×3 mm
Centre punch: 1 pc. 120×4 mm

Corrugated wire securely crimped into the steel body. Dense packing, high concentricity and wear resistance

also referenced under: OOMAMARP3000G, CRM 96

Housing for drawers, shelves, etc. possible in steps of 20 mm. The base and upper cabinets are provided with corresponding perforations for screwing together, equipment with castors (height 1200 mm max.) Or wall mounting.
Doors with safety edges, reinforced and rigid, hinged or sliding door available, solid sheet model or with polycarbonate manhole. The cabinet without doors can also be used as open shelving.
Cylinder locks with 2 keys each integrated in the sliding handle. On request, possibility of delivery of locks for installations with security card at an additional cost.
Colors: As standard, body in light gray RAL 7035, doors and drawers in signal blue RAL 5005, powder-coated.
Cabinets fitted directly or subsequently with drawers must be anchored to the floor or to the wall to avoid any risk of tipping and may under no circumstances be subsequently fitted with casters.
In the case of specific equipment, make sure that the sum of the mounting heights does not exceed the useful height of the cabinet.
Shelves and accessories for combinable cabinets, see art codes. 957000 - 957100.
Installation of drawers in the upper part of the cabinet for base cabinets and in the lower part of the cabinet for upper cabinets.
Material thickness: 0.9mm
Permissible load of drawers / extendable shelves: 60 kg
Permissible shelf load / Maximum load per rack distributed over the surface (on the metal): 100 kg
Allowable load internal cabinet body: 1000 kg
Drawer extraction (partial / total): 100%
Door opening angle: 225 degree
Height adjustment in steps: 20 mm
Cylinder lock: Modular cylinder
Available colors: RAL 9002, 7035, 7005, 7016, 6011, 5018, 5012, 5011, 5005, 3003
Safety certificate: GS TÜV Süd
Height: 800 mm
Width: 500mm
Depth: 550 mm
Useful height: 640 mm
Weight: 30 kg

Sliding combination square, metric and imperial marking on ruler
Can mark 90° and 45°
Adjustable depth for repetition marking and scribing
Built in level bubble for approximate marking and a metal scriber contained in the end
Size: 300mm / 12"

Overall length: 180mm
Piano wire cutting values ​​up to ⌀: 2 mm
Standard: DIN ISO 5746
Material: Chrome vanadium steel
surface: chrome
spark-free: no
EAN/GTIN: 3662424087257
Manufacturer number: 187A.18CPE
Execution:
Chrome vanadium steel, chrome-plated head and joint, with heavy-walled covers on handles. Serrated jaws. Plastic opening spring that reduces fatigue. Induction hardened cuts (approx. 64 HRC), also suitable for piano wire.

Forged by stamping. With opening to tight tolerances

Drop forged. With close tolerance jaw width.
With oval shaft. Chrome vanadium steel, chrome-plated.

Large backlit LCD display (digit height: 21 mm). Stainless steel weighing pan.
Very easy to use with 2 keys.
Taring function (accumulation of weighings) for easy reset of the display.
Battery operated, automatic shutdown after 3 minutes.
Connection of an AC adapter possible.
Maximum weighing range: 50,000 g
Reading: 20 g
Board dimensions: 320 × 260
Width: 320mm
Depth: 300mm
Height: 60mm
Power supply: Battery operated
Number of batteries included: 2
Code art. batteries included: LR6
Net weight: 2.6 kg

plastic, 6-part,
5 / 10 / 15 / 20 / 25 / 30 mm thick,
size 320 x 150 mm

Strong pressed steel shanks with rotating wheel and lock. With 6 different hollow punches (2.0; 2.5; 3.0; 3.5; 4.0 and 4.5 mm ⌀).
70% less force required due to efficient leverage. Ergonomically shaped plastic grips.
For soft materials such as leather use an underlay to avoid damage when a lot of pressure is applied.
overall length: 250 mm

also referenced under: EHDWSANDCG05, EHDWSANDCG15, CRM 481, CRM 482

with straight jaws

with round jaws

with straight jaws

with round jaws

with straight jaws

with round jaws

Bosch cordless drill / driver

Compact, powerful cordless drill with forward/reverse operation.
Long service life thanks to brushless EC motor (not 070243).
With Electronic Motor Protection (EMP) and Electronic Cell Protection (ECP).
LED light to illuminate the working area and battery charge display.
Multi-stage torque setting for precise screw driving.
Electronic speed control for precise drilling and screw driving.
Softgrip.

Outstanding available and comfortable handling due to compact design. Motor brake for precise work.
suitable battery - supplier / battery type / voltage: Bosch 18 V
Manufacturer's designation: GSR 18V-21
Motor design: 4-pole DC motor
Battery capacity: 2 A·h
Battery voltage: 18 V
maximum torque soft: 21 N·m
maximum torque hard: 55 N·m
Speed range 1st speed: 0 min-1 - 480 min-1
Speed range 2nd speed: 0 min-1 - 1,800 min-1
Quick-clamping chuck range: 1.5 mm - 13 mm
maximum twist drill size ⌀ in steel: 13 mm
maximum twist drill size ⌀ in wood: 35 mm
Weight: 1.7 kg
maximum vibration to EN: <2.5 m/s2

All cutters have 3 teeth, radial relief.
The flutes are rectified in the mass.
Bevelling cutters in economical execution.
Use:
Precision chamfering cutters for making bevels without facets.

All cutters have 3 teeth, radial relief.
The flutes are rectified in the mass.
Bevelling cutters in economical execution.
Use:
Precision chamfering cutters for making bevels without facets.

All cutters have 3 teeth, radial relief.
The flutes are rectified in the mass.
Bevelling cutters in economical execution.
Use:
Precision chamfering cutters for making bevels without facets.

Countersink sets, in a case
Practical set for assembly and workshop use.
Content table use:
1× each countersink: Size 4,3; 5; 6; 6,3; 7; 8; 8,3; 10; 10,4; 11,5, 12,4; 15; 16,5; 19; 20,5; 23; 25
Number of countersinks: 17
Countersink tip angle: 90 degrees
Tool material: HSS
Number of cutting edges Z: 3

Countersink sets, in a case.
Practical set for assembly and workshop use.
Content table use:
1× each countersink: Size 6; 8; 10; 11.5; 15; 19
Number of countersinks: 6
Countersink tip angle: 90 degrees
Tool material: HSS
Number of cutting edges Z: 3

Total length: 205mm
For conductor cross section: 0.5 mm² - 6 mm²

Execution:
Steel body with reduction system. Exact achievement of the defined crimping forces thanks to the integrated automatic clamping.
Economic model. Lateral introduction of the tips.

Body drop forged. Jaws chemically blackened, head bright polished. Notched jaws for crimping terminals to DIN 46228.
Plastic coated handles.

Width of the jaws: 150mm
Opening of the vice: 130 mm
Height of the jaws: 40 mm
Between axis: 160 mm
Overall dimensions WxDxH: 450x450x160 mm
X axis, longitudinal stroke: 200 mm
Y axis, transverse stroke: 200 mm

Fully hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering. Special quality, i.e. highest possible tip hardness (approx. 59 HRC) with exceptional toughness.
Chrome vanadium special alloy. Surface chrome-plated.

Fully hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering. Special quality, i.e. highest possible tip hardness (approx. 59 HRC) with exceptional toughness.
Chrome vanadium special alloy. Surface chrome-plated.

⌀275, ⌀40, 2.5mm
140 teeth

Universal cutting disc for steel and INOX, good cutting quality and resistant.
For freehand cutting on electric and pneumatic angle grinders with a maximum cutting speed vc of 80 m / s.
Maximum rotation speed: 80 m / s
⌀ bore: 22,23 mm
⌀ disc: 230 mm
Disc thickness: 2.5 mm
Max rotation speed: 6 600 min-1

for metal, D115mm