Multi-material handle with optimized grip area in terms of torque and comfort. Chrome-vanadium steel blade, chrome-plated

Multi-component power handle with grip zone optimised for torque and comfort. Blade made of chrome vanadium steel, chrome-plated.
With Kraftform Micro multi-element precision screw grip and revolving centre cap.
Width across flats: 3 mm
overall length: 157 mm
Blade length: 60 mm

Multimatized handle with grip zone optimized in terms of torque and comfort

Disposition of the blades around the axis of the tool

The grain, the binder, the abrasion-enhancing additives and the trimming disk reinforcement offer optimal abrasion performance and their service life depends on the different areas of use.
Disc to be deburred for steel and stainless steel with long service life and high abrasion capacity.
Maximum rotation speed: 80 m / s
⌀ bore: 22,23 mm
Max rotation speed: 6 600 min-1
Thickness of disc: 8 mm
⌀ disc: 230 mm

Mango de madera

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on 3 faces; square end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form A
Length without tang: 250 mm

Pure black Chinese bristle, 90 % tops. Metal ferrule, 9. gauge, unpainted wooden handle.

Of stainless spring steel strip.
Clean electrolytically applied black graduations and figures with a smooth surface. Easy to read. Rounded edges to prevent injuries.
Upper and lower edges both with 1 mm graduations.

Blade thickness: 0.4 mm
Blade length: 150 mm
TPI: 25

Plastic bucket, sturdy model. With graduation and heavy metal handle.

With shock-proof plastic handle and round chrome-plated blade.
Material: Chrome vanadium steel.
Blade length: 80 mm
Blade ⌀: 5 mm
overall length: 155 mm

Multimatized handle with grip zone optimized for torque and comfort

also referenced under: OOMAMARPOL3500A, OOMAMARPOL3500C CRM 90, CRM 90.1

L 300mm

also referenced under: EMACWELDWMHA, CRM 23

Two cross-head profiles of different sizes, with 90° offset blades. Vanadium-molybdenum steel. Handle made of high quality impact resistant plastic.

Comfortable multi-material cross handle made of plastic. Chrome-vanadium steel blade, chrome-plated.
Hexagonal: 6mm
Blade length: 350 mm
Total length: 382 mm

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
With helical cut; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form E
Length without tang: 200 mm

Of stainless spring steel strip.
Clean electrolytically applied black graduations and figures with a smooth surface. Easy to read. Rounded edges to prevent injuries.
Upper and lower edges both with 1 mm graduations.

Ergonomically shaped T-handle with easy-grip Santoprene® surface and an impact resistant plastic core. Blade of chrome vanadium special steel. Surface chrome-plated.
Impact resistant plastic T-handle. Blade of special vanadium steel, surface matt chrome-plated.

for hardwood, softwood, vinyl, nylon, plaster, chalk, chipboard, linoleum, rubber, thermalite, fiberglass

3 lines

also referenced under: EMACWELDWMBR, CRM 20

Made of stainless steel, with return spring.
Straight jaws, plastic coated handles.
Widely applicable. Ideal for thin sheet metal, plastics, leather, cardboard, paper, cord, fabrics etc.
overall length: 140 mm
Length cutter. 30 mm

Automatic blocking of the ribbon during stretching.
Rewinding the ribbon by pressing the button.
Mobile terminal hook.
Yellow tape measure, printed black / red, acrylic coating for better resistance to abrasion.
Case dimensions: 52x49x22mm
Ribbon length: 2m
Band width: 13mm

With clearance plate, line : 4 m, D 2mm

Fully hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering. Special quality, i.e. highest possible tip hardness (approx. 59 HRC) with exceptional toughness.
Chrome vanadium special alloy. Surface chrome-plated.

Swiss precision needle files satisfy the highest demands for accuracy of shape, precision cut, removal rate and tool life. Cut length = 1/2 file length. Manufactured from special steel for precision files with high wear resistance (65-66 HRC). Precisely determined shapes, special cut angle and large selection of different cuts. High metal removal rate.
Overall length: 160 mm
Diameter: 2.9 mm

Comfortable multi-material cross handle made of plastic. Chrome-vanadium steel blade, chrome-plated.
Hexagonal: 8mm
Blade length: 350 mm
Total length: 382 mm

All cutters have 3 teeth, radial relief.
The flutes are rectified in the mass.
Bevelling cutters in economical execution.
Use:
Precision chamfering cutters for making bevels without facets.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Multimatized handle with grip zone optimized in terms of torque and comfort

Made of flat-oval steel, hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering.

Multi-material handle with optimized grip area in terms of torque and comfort. Chrome-vanadium steel blade, chrome-plated

Straight hexagonal shank with ball point.
Kraftform handle made of impact-resistant plastic with integral soft zones. Blade of high quality tool steel, surface matt chrome-plated, black tips.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Chrome-plated, black tips. Size TX20 − TX40 with side drive.

Ergonomically shaped T-handle with easy-grip Santoprene® surface and an impact resistant plastic core. Blade of chrome vanadium special steel. Surface chrome-plated.
Impact resistant plastic T-handle. Blade of special vanadium steel, surface matt chrome-plated.

In plastic clip.
L-form shaft to DIN 911/DIN ISO 2936, chromium-vanadium steel, end faces squared and milled.
Content table use: 1 pc. each screwdriver Size 2; 2.5; 3; 4; 5; 6; 8

Sturdy model, wear resistant. Jaws chemically blackened, head bright polished.
Standard: DIN ISO 9243
Material: Special tool steel, drop-forged, and oil-hardened.
Surface: chemically blackened, head bright polished
Cutting capability: medium hard wire up to ⌀2 mm
overall length: 210 mm

Sturdy model, wear resistant. Jaws chemically blackened, head bright polished.
Standard: DIN ISO 9243
Material: Special tool steel, drop-forged, and oil-hardened.
Surface: chemically blackened, head bright polished
Cutting capability: medium hard wire up to ⌀2 mm
overall length: 180 mm