Special grade for: Stainless steel

Jeu de 3 tarauds composé d’un ébaucheur, d’un intermédiaire et d’un finisseur

Measuring jug set of transparent polypropylene, resistant to oil and acid. Scale with ml divisions, ergonomic handle, stackable.
Supplied with:
1 measuring jug 0.5 litre, scale division 10 ml.
1 measuring jug 1.0 litre, scale division 10 ml.
1 measuring jug 2.0litre, scale division 20 ml.

Vice jaws of extruded aluminium With integrated permanent magnets, suitable for all vices of corresponding jaw width. Unique clamping force due to large magnet area.
Clamping faces smooth.
Suitable for: All vice models.
New version with 50% more gripping power.
Jaw width: 100 mm
Type of fastening: Permanent magnet
Type of clamping face: smooth

Closed, pre-stretched line. ≥ M3 with GUN entry on both sides for easy threading and clean chip evacuation in the cutting direction. Entry on 2 nets. Ground and nitrided, rake angle approx. 15 °.
Thread size: M6
Thread Type: M
Side angle: 60 °
Tool type: HSS E
Tolerance class: DIN 13 6g
Cutting direction: straight
Pitch: 1mm
⌀ outer: 20mm
Height: 7mm

Closed, pre-stretched line. ≥ M3 with GUN entry on both sides for easy threading and clean chip evacuation in the cutting direction. Entry on 2 nets. Ground and nitrided, rake angle approx. 15 °.
Thread size: M5
Thread Type: M
Side angle: 60 °
Tool type: HSS E
Tolerance class: DIN 13 6g
Cutting direction: straight
Pitch: 0.8mm
⌀ outer: 20mm
Height: 7mm

For connecting screwdriver bits to drive attachments or screwdrivers with a 1/4, 3/8 or 1/2 inch square drive.
With quick-change coupling; for electric screwdrivers.
Square drive: 1/4 inch
overall length: 30 mm
Hexagon drive: C 6.3 (1/4 inch)

High quality malleable cast iron clamping arms; strong prismatic steel slide beam, knurled, electro-galvanised. Low friction steel spindle, burnished with trapezoidal thread and movable jaw. Instant (high speed) adjustment, reliable clamping. Up to size 400 with plastic protective cover on the clamping jaw, from size 500 onwards without protective cover.
Standard: DIN 5117
Cross section of the slide rail: 29x9mm
Throat: 120mm
Jaw capacity: 250mm

ProfCut handsaws with handy 2-component handle.
GT- toothing (hardened, 3×ground), for dry, hard wood.
TPI: 9
Blade length: 475 mm

Description
Content:
Assorted bits blades C6.3 (1/4 inch); 1 coupling shank.
Content table use:
30 bits set 1/4 inch C6.3, length 25 mm: gs_profil_phillips 1 pc. each size 1; 2; 3
gs_profil_pozidriv 2 pcs. each size 1; 2; 3
gs_profil_schlitz 1 pc. each size 4; 5; 6.5
gs_profil_torx 2 pcs. each size TX10; TX20; TX40
gs_profil_torx 3 pcs. each size TX15; TX25; TX30
gs_profil_6kant 1 pc. each size 4; 5; 6
1 adapter: 1/4 inch gs_profil_4kant-einsatz – 1/4 inch gs_profil_6kant-einsatz
Adapter: 1 pc.

Square drive: 3/8 in
Total length: 305mm

For Range of Motion (ROM) measurements of metacarpal, phalangeal and interphalangeal joints. Linear inch and centimeter markings on both sides of protractor in opposite directions. Protractor measures 0 degree to 150 degree in 5 degree increments.

Precision machined edges and flat surfaces

Version:
Multi-purpose drill with especially sharp carbide insert for precise holes in different materials. Large-volume helical flute for quick removal of dust and chips. Shank of annealed special steel.
Application:
For drilling various materials, including in a single operation:
Bricks, porous concrete, lightweight materials, plastics.
Tiles, ceramics, marble, glass.
Metal and material combinations in a single operation, such as when fitting windows or when reinforcing concrete.
Content:
1 each drill Size. (⌀) 4; 5; 6; 6; 8; 8; 10
Note:
Caution: only for rotary use (without hammer action!)
Faster drilling and more holes per battery charge than with hammer drill bits.

for perforating leather, fabric and plastic, with 6 interchangeable nozzles with a diameter of 2.0 / 2.5 / 3.0 / 3.5 / 4.0 / 5.0 mm, with opening spring and locking system, powder coated for good rust protection, gripper body and nozzles: special tool steel, oil hardened

Comfortable multi-material cross handle made of plastic. Chrome-vanadium steel blade, chrome-plated.
SET of : 6, 8, 10mm
Blade length: 350mm
Total length: 385mm

Multi-component power handle with grip zone optimised for torque and comfort. Blade of chrome vanadium steel.
1 each slot-head screwdriver size 3.5; 5.5; 7; 8.
1 each screwdriver for Phillips size 1; 2.

Closed, pre-stretched line. ≥ M3 with GUN entry on both sides for easy threading and clean chip evacuation in the cutting direction. Entry on 2 nets. Ground and nitrided, rake angle approx. 15 °.
Thread Size: M4
Thread Type: M
Side angle: 60 °
Tool type: HSS E
Tolerance class: DIN 13 6g
Cutting direction: straight
Pitch: 0.7mm
⌀ outer: 20mm
Height: 5mm

Micro-serrated. Snip jaws made of stainless steel (HRC 58 − 60), handles of sheet steel, nickel plated. 2-component handle with non-slip insert of soft material, easy on the hand.
Cutting capacity: Metal sheets up to 1.8 mm, stainless steel sheets up to 1.2 mm.
Application:
For curved and short straight cutting.

HSS, 19 pieces, D 1 to 10mm by step of 0.5mm

Optimized for material: Steel

also referenced under: EMACSAWSJ6B3

Wire thickness: 2.4mm, 8 wires

Closed, pre-stretched line. ≥ M3 with GUN entry on both sides for easy threading and clean chip evacuation in the cutting direction. Entry on 2 nets. Ground and nitrided, rake angle approx. 15 °.
Thread size: M3
Thread Type: M
Side angle: 60 °
Tool type: HSS E
Tolerance class: DIN 13 6g
Cutting direction: straight
Pitch: 1.5mm
⌀ outer: 30mm
Height: 11mm

Carbide measuring surfaces finely lapped.
Measuring pin hardened and ground.
Blocking by lever.
With friction clutch and insulation.
With graduation of quality.
Metrology: Analogue / Packaging: Robust box / Standard: DIN 863 / ⌀ Spindle: 6.5 mm / Reading: 0.01 mm / Calibration: B1 / Measuring range: 0 mm - 25 mm / Micrometer scale: 1/50 mm / ⌀ micrometer drum: 18 mm

Sturdy metal central piece with handle of hickory, with nylon handle protection sleeve and ring wedge. The nylon inserts are impact resistant and wear-resistant, and are attached to the central piece by a double action system.
Central piece of steel.

Corrugated wire securely crimped into the steel body. Dense packing, high concentricity and wear resistance

also referenced under: OOMAMARP3000G, CRM 96

Solid semicircular graduated arc with graduation 0 − 180°; reading 1°.
Scale plate non-glare chrome-plated. With clamping nut.

Closed, pre-stretched line. ≥ M3 with GUN entry on both sides for easy threading and clean chip evacuation in the cutting direction. Entry on 2 nets. Ground and nitrided, rake angle approx. 15 °.
Thread size: M8
Thread Type: M
Side angle: 60 °
Tool type: HSS E
Tolerance class: DIN 13 6g
Cutting direction: straight
Pitch: 1.25mm
⌀ outer: 25mm
Height: 9mm

Power grip with non-allergenic secure grip surface and a particularly tough impact resistant polypropylene core. The special surface structure allows transmission of high torques, even with wet or oily hands. Blade of chrome vanadium special alloy combines maximum hardness and exceptional toughness. Nickel-plated and chrome-plated surface, black tips.
1 each screwdriver: Size 1; 2; 3

Densely woven cotton cloth evenly spread with synthetic resin bonded Aluminium Oxide (A). Very good grit bonding, high abrasion performance and long service life.
Type VSM KK 114 F: Brown fabric, for extremely demanding applications. This grade is particularly supple, resistant to oil and petroleum and can be torn in longitudinal direction to yield clean edges without fraying.
Packaging tape with integral tear-off cutter.
Application:
Predominantly for rubbing down metals by hand, but also suitable for all other materials.

Narrow shape with profiled body in double T (chrome). 22 ° jaw position. Forged and hardened. With graduation on the jaws.
Maximum opening: 34mm
Total length: 300mm

Overall length: 180mm
Piano wire cutting values ​​up to ⌀: 2 mm
Standard: DIN ISO 5746
Material: Chrome vanadium steel
surface: chrome
spark-free: no
EAN/GTIN: 3662424087257
Manufacturer number: 187A.18CPE
Execution:
Chrome vanadium steel, chrome-plated head and joint, with heavy-walled covers on handles. Serrated jaws. Plastic opening spring that reduces fatigue. Induction hardened cuts (approx. 64 HRC), also suitable for piano wire.

Ø72.5 x 200mm

also referenced under: EHDWSANQD072, CRM 483

Strong pressed steel shanks with rotating wheel and lock. With 6 different hollow punches (2.0; 2.5; 3.0; 3.5; 4.0 and 4.5 mm ⌀).
70% less force required due to efficient leverage. Ergonomically shaped plastic grips.
For soft materials such as leather use an underlay to avoid damage when a lot of pressure is applied.
overall length: 250 mm

Matte chromed anti-glare reading parts.
Fine graduation, high contrast.
Finely honed measuring surfaces.
Locking screw at the top.
Technical data
All parts: hardened / Depth gauge: flat / Metrology: analog / Locking: Locking screw on top / Thread table: Caliper table / Material: Stainless steel, INOX / Switchable reading: mm - inch / Graduation: 1/20 mm / Graduation: 1/128 inch / Allowable error: 0.05 mm / Standard: DIN 862 / Measuring range: 0 mm - 150 mm / Calibration: A1 / Packing: Case / Reading: 0.05 mm / Spout length: 40 mm

also referenced under: OOMAMARP3000J, CRM 99

∅10/85mm, 0.5mm thick
To cut:
Steel sheets up to 1mm, plastics, wood, putty, non-ferrous metals

Classic screwdrivers set with wall mount
PH 0; PH 1; PH 2; PH 3
for Phillips screws
precise, true-to-size tips, optimal fit in the screw heads
slim handle, compact and for universal applications
high-quality materials used, impact-resistant and oil/gasoline resistant
special alloy based on spring steel, exceptional elasticity coupled with high grade hardening
laser-marked serial number, lifetime guarantee

With sharp drill point, pre-drilling not necessary. Conically increasing cutting edges and radially relief ground circumference for a paring cut. With scale in the flutes. Three drive flats on the shank.
Leaves no burr or chatter marks.
Sheet metal 0.1 − 2 mm, stainless steel 0.1 − 1 mm, non-ferrous metals: 0.1 − 5 mm, plastics up to 10 mm.
Cutter ⌀ Dc: 16 mm - 30.5 mm
Overall length: 71 mm
Shank ⌀: 10 mm
Tool material: HSS

High quality malleable cast iron clamping arms; strong prismatic steel slide beam, knurled, electro-galvanised. Low friction steel spindle, burnished with trapezoidal thread and movable jaw. Instant (high speed) adjustment, reliable clamping. Up to size 400 with plastic protective cover on the clamping jaw, from size 500 onwards without protective cover.
Standard: DIN 5117
Cross section of the slide rail: 35×11 mm
Throat: 120 mm
Jaw capacity: 500 mm

Vice jaws of extruded aluminium With integrated permanent magnets, suitable for all vices of corresponding jaw width. Unique clamping force due to large magnet area.
Clamping faces smooth.
Suitable for: All vice models.
New version with 50% more gripping power.
Jaw width: 150mm
Type of fastening: Permanent magnet
Type of clamping face: smooth

Closed, pre-stretched line. ≥ M3 with GUN entry on both sides for easy threading and clean chip evacuation in the cutting direction. Entry on 2 nets. Ground and nitrided, rake angle approx. 15 °.
Thread size: M10
Thread Type: M
Side angle: 60 °
Tool type: HSS E
Tolerance class: DIN 13 6g
Cutting direction: straight
Pitch: 1.5mm
⌀ outer: 30mm
Height: 11mm