Functions and benefits:
The Module System, Transfemoral, Child, is part of the Rehab'Impulse modular system that permits prosthetic fitting for various levels of amputation and disarticulation of the lower extremities. The child transfemoral kit consists of a set of components allowing different alignment configurations.

Intended use:
The Rehab'Impulse module system, transfemoral, child, is intended for prosthetic fitting of users with a body weight of up to 60 kg (P3). This product is not intended for excessive physical activities.

Compatibility:
The components included in the set are compatible with the Rehab'Impulse children knee joints and prosthetic feet:
- 74-00240 Knee Joint, Monocentric, Child, Beige
- 74-00241 Knee Joint, Monocentric, Child, Olive
- 74-00242 Knee Joint, Monocentric, Child, Terra
- Foot, SACH 2.0, sizes 14-21

Included in delivery*:
- 1x Cup, TTA/TTC/TFC/LS
- 1x Convex disc
- 1x Conical cup, transfemoral, child
- 1x Concave cylinder, M8, child
- 1x Convex ankle washer, child
- 1x Screw, countersunk head, FT, SS, M10x50
- 2x Flat washer, SS, 15/44/3
- 1x Flat washer, SS, 10.5/25/1.5
- 1x Hexagonal nut, SS, M10
- 1x Coiled spring expansion pin, SS, 5x40

Storage conditions:
- Store product in dry conditions
- Store at room temperature (ideally between 15°C and 25°C)
- Keep out of direct sunlight or other sources of light with a high UV content
- Take precautionary measures against sparking and fire

Environmental conditions:
Recommended environmental conditions:
- Temperature range for use : -10°C to 60°C (14°F to 140°F)
- Relative humidity 0% to 90%, no condensing situation
- Avoid exposure to dust, sand, salt water, acids and urine
*Please note: Knee joint and foot not included with the system. To be ordered separately

Suitable to use on below knee prostheses. Features a hole (diameter: 22mm) and can be used on both right and left side.

Used to connect lower extremity modular prosthetic parts. The part is used with PR05. A4 - Wooden Connection Plate.

Max 125kg

- Modular design: 3 bars sizes (150, 180, 220 mm) & 7 shoe sizes to fit children 3 months – 5 years old.
- Easy to use: Shoes clip on and off the bar to make putting the brace on the child much easier.
- Comfortable: Soft canvas shoes are lined to prevent blisters. Pronounced internal heel cup and inspection hole helps ensure the foot is positioned correctly in the shoe.
- Washable: Shoes and bar can be hand washed.
- Durable: Bar and shoes can be reused if in good condition.
- Child friendly design: Many parents report that this colorful, plastic brace feels less stigmatizing than other models.
- Medically Compliant: Meets Ponseti Method and WHO Assistive Technology product specifications. Registered FDA and CE certified.
- Adjustable: Shoes can be set to 65˚ or 45˚ of abduction to accommodate bi- and unilateral cases.
- Manufacturing: Plastic parts are injection molded in the US. The shoes are made in China.

also referenced under: OCPOMODU2R2, 2R41=1

Max 100kg

• 10x Rubber Bumpers
• 10x Screw, M5, Stainless Steel

Functions and benefits
The Pyramid Adapter, Knee Joint, Adult, is part of the Rehab'Impulse modular system and is designed to provide compatibility with standard modular tube clamp adapters used as interface with common modular hip joints.

Intended use
The Rehab'Impulse knee joint pyramid adapter, adult, is intended for prosthetic fitting of users with a body weight of up to 80 kg (P4). This product is not intended for excessive physical activities.

Compatibility
- 74-00243 Knee Joint, Monocentric, Adult, Beige
- 74-00244 Knee Joint, Monocentric, Adult, Olive
- 74-00245 Knee Joint, Monocentric, Adult, Terra
- 74-00246 Knee Joint, Polycentric, Adult, Beige
- 74-00247 Knee Joint, Polycentric, Adult, Olive
- 74-00248 Knee Joint, Polycentric, Adult, Terra

Included in delivery
- 1x Pyramid
- 1x Threaded pin M8/M10
- 1x Hexagonal Nut, SS, M8

Storage conditions
- Store product in dry conditions
- Store at room temperature (ideally between 15°C and 25°C)
- Keep out of direct sunlight or other sources of light with a high UV content
- Take precautionary measures against sparking and fire

Environmental conditions
Recommended environmental conditions:
- Temperature range for use : -10°C to 60°C (14°F to 140°F)
- Relative humidity 0% to 90%, no condensing situation
- Avoid exposure to dust, sand, salt water, acids and urine

for feet size: 14-21cm

Adapter tubes used to connect lower extremity modular prosthetic parts.

also referenced under: OCPOMODUZ00021, 2R2

Length=410mm

Aluminium

The Clauss 7” PowerFleXX Shears feature stalwart, Titanium Bonded blades that are 3x harder than untreated stainless steel and provide exceptional edge retention across countless cuts. The handles are just as strong, offering impact and shock resistance along with oversized bow design for increased comfort and reduced hand fatigue. Also featuring multi-directional ground blades, fully adjustable tension, and knife edges for superior cutting performance, the PowerFleXX Shears are a strong option for those seeking well-rounded and long-lasting shears.

Titanium bonded blades are 3x harder than untreated stainless steel and will stay sharp for longer
Impact/shock resistant handles
Oversized bows
Multi-directional ground blades
Knife edges for superior cutting performance
Fully adjustable
Lifetime Warranty

Adapter tubes used to connect lower extremity modular prosthetic parts.

Functions and benefits
The Rehab'Impulse Passive Hand is a cosmetic hand made of soft thermoplastic polyurethane. Besides its natural appearance, it allows passive handling and holding of small objects. It is available in two sizes and four colours. The large size is recommended for men while the medium size is recommended for women and adolescents.
Both hand sizes feature an M10 interface.

Intended use
This product is intended for prosthetic fitting on adults and adolescents and is exchangeable with a hook or a working ring.

Compatibility
A wrist adapter will be made available shortly.

Included in delivery
- 1x Passive Hand

Storage conditions
- Store product in dry conditions
- Store at room temperature (ideally between 15°C and 25°C)
- Keep out of direct sunlight or other sources of light with a high UV content
- Take precautionary measures against sparking and fire

Environmental conditions
Recommended environmental conditions:
- Temperature range for use : -10°C to 60°C (14°F to 140°F)
- Relative humidity 0% to 90%, no condensing situation
- Avoid exposure to dust, sand, salt water, acids and urine

Functions and benefit:
The Module System, Transtibial, Adult, is part of the Rehab’Impulse modular system that permits prosthe- tic fitting for various levels of amputation and disarti- culation of the lower extremities. The adult transtibial kit consists of a set of components allowing different alignment configurations.

Intended use:
The Rehab’Impulse module system, transtibial, adult, is intended for prosthetic fitting of users with a body weight of up to 80 kg (P4). This product is not intended for excessive physical activities.

Compatibility:
The components included in the set are compatible with the Rehab’Impulse prosthetic feet:
- Foot, SACH 2.0, sizes 22-28

Included in delivery*:
- 1x Cup, TTA/TTC/TFC/LS
- 1x Convex disc
- 2x Concave cylinder, M10, adult
- 1x Convex ankle washer, adult
- 1x Screw, countersunk head, FT, SS, M10x60
- 1x Flat washer, SS, 15/44/3

Storage conditions:
- Store product in dry conditions
- Store at room temperature (ideally between 15°C and 25°C)
- Keep out of direct sunlight or other sources of light with a high UV content
- Take precautionary measures against sparking and fire

Environmental conditions:
Recommended environmental conditions:

- Temperature range for use : -10°C to 60°C (14°F to 140°F)
- Relative humidity 0% to 90%, no condensing situation
- Avoid exposure to dust, sand, salt water, acids and urine
* Please note : Foot not included with the system. To be ordered separately.

Functions and benefits:
The Module System, Transfemoral, Adult, is part of the Rehab'Impulse modular system that permits prosthetic fitting for various levels of amputation and disarticulation of the lower extremities. The adult transfemoral kit consists of a set of components allowing different alignment configurations.

Intended use:
The Rehab'Impulse module system, transfemoral, adult, is intended for prosthetic fitting of users with a body weight of up to 80 kg (P4). This product is not intended for excessive physical activities.

Compatibility:
The components included in the set are compatible with the Rehab'Impulse adult knee joints and prosthetic feet:
- 74-00243 Knee Joint, Monocentric, Adult, Beige
- 74-00244 Knee Joint, Monocentric, Adult, Olive
- 74-00245 Knee Joint, Monocentric, Adult, Terra
- 74-00246 Knee Joint, Polycentric, Adult, Beige
- 74-00247 Knee Joint, Polycentric, Adult, Olive
- 74-00248 Knee Joint, Polycentric, Adult, Terra
- Foot, SACH 2.0, sizes 22-28

Included in delivery*:
- 1x Cup, transfemoral adult
- 1x Convex disc
- 1x Conical cup, transfemoral, adult
- 1x Concave cylinder, M10, adult
- 1x Convex ankle washer, adult
- 1x Screw, countersunk head, FT, SS, M10x50
- 2x Flat washer, SS, 15/55/3
- 1x Flat washer, SS, 10.5/25/1.5
- 1x Hexagonal nut, SS, M10
- 1x Coiled spring expansion pin, SS, 5x45

Storage conditions:
- Store product in dry conditions
- Store at room temperature (ideally between 15°C and 25°C)
- Keep out of direct sunlight or other sources of light with a high UV content
- Take precautionary measures against sparking and fire

Environmental conditions:
Recommended environmental conditions:
- Temperature range for use : -10°C to 60°C (14°F to 140°F)
- Relative humidity 0% to 90%, no condensing situation
- Avoid exposure to dust, sand, salt water, acids and urine
*Please note: Knee joint and foot not included with the system. To be ordered separately

Lamination dummy is included

also referenced under: OCPOMODUZ00019, 4R23

also referenced under: 5R9

also referenced under: ODROSTOC5R16, 5R1=6

Adapter tubes used to connect lower extremity modular prosthetic parts.

Length=430mm

also referenced under: OCPOMODU4R21, 4R66

Flexible, non-shaped colored foam for modular transtibial prostheses.

Mobility degree 1-2, Heel height 10mm, Max. load 125kg, Material PU

Length=430mm

Max 125kg

Mobility degree 2-3, Heel height 10mm, Max. load 100kg, Material PU

also referenced under: OCPOFOOT1H...

3mm / 60mm

3mm / 60mm

2.5mm / 57mm

2.5mm / 57mm

Length from joint
center=40.5mm

Length from joint
center=40.5mm

Length from joint
center=40.5mm

Length from joint
center=40.5mm

Max load: 65kg

ELASTIC! That’s what the Upya foot cover is.
Another innovation: 1 model of foot cover for all Upya sizes, as easy as pie!
The Upya foot cover is available in light and dark flesh colours.
WEIGHT: 65 grams
MATERIAL: EVA

WARNING, it is recommended to have Upya and its spare parts installed by an orthopaedic professional.

We have tried to make it as simple as possible, so the screw kit used to assemble Upya is composed of 4 short and 1 long axis.
Make sure to align the axis flat side with the flat side on the Upya’s polyamide parts.
WEIGHT: 70 grams
MATERIAL: 304 stainless steel and galvanised steel