Degree of mobility: 1
Knee flexion angle: 140°

Degree of mobility: 2
Knee flexion angle: 165°

Degree of mobility: 1
Knee flexion angle: 140°

Used to ensure connection between ankle and foot
Length from joint
center=60mm

bar width: 14mm
bar thickness: 3mm
bar length: 317mm (Upper) / 292mm (Lower)
Material: Stainless Steel

bar width: 14mm
bar thickness: 3mm
bar length: 317mm (Upper) / 292mm (Lower)
Material: Stainless Steel

Lara Carbon Foot is especially recommended for above, below-knee and hip amputation patients who are very active and under 125 kgs.
Due to its design, LARA offers many advantages for daily use for users with Mobility degrees 3 and 4.
Nothing stands in the way of sporting activities such as tennis, which subjects the user to greater impact stress. The LARA also allows for comfortable and energy-saving walking during the daily challenges at work and at home.
LARA’s innovative heel design enables users to perform daily activities with less energy consumption by storing the energy expended during activities and this reduces foot fatigue compared with conventional designs.

Due to its design, Lara offers many advantages for daily use for users with Mobility degrees 3 and 4.
Nothing stands in the way of sporting activities such as tennis, which subjects the user to greater impact stress. The Lara also allows for comfortable and energy-saving walking during the daily challenges at work and at home.

Lara’s innovative heel design enables users to perform daily activities with less energy consumption by storing the energy expended during activities and this reduces foot fatigue compared with conventional designs.

curved blade for soft curves and small radii
well suited for creating the socket contour
Kretzer, 9,5”/24 cm bent

Above knee amputation, transfemoral

Below knee amputation, transtibial

Manual elbow joint with an anatomically shaped underarm for upper extremity mechanical prosthetic applications. The integrated locking system allows the joint to lock in 12 different positions. Flexion angle 120°

Manual elbow joint with an anatomically shaped underarm for upper extremity mechanical prosthetic applications. The integrated locking system allows the joint to lock in 12 different positions. Flexion angle 120°

suitable for marking socket contours
easy to wipe off
water soluble

Amputation: Below-knee (transtibial) amputees
Socket: Interim socket / Test socket
Remolds: 10 times
All-in-One: mounting plate attached
Offset: 1 cm
Suspension system: Passive vacuum (liner + sleeve) or Pin-Lock (Clutch)
Weight bearing: Total-Surface-Bearing (TSB)

- Modular design: 3 bars sizes (150, 180, 220 mm) & 7 shoe sizes to fit children 3 months – 5 years old.
- Easy to use: Shoes clip on and off the bar to make putting the brace on the child much easier.
- Comfortable: Soft canvas shoes are lined to prevent blisters. Pronounced internal heel cup and inspection hole helps ensure the foot is positioned correctly in the shoe.
- Washable: Shoes and bar can be hand washed.
- Durable: Bar and shoes can be reused if in good condition.
- Child friendly design: Many parents report that this colorful, plastic brace feels less stigmatizing than other models.
- Medically Compliant: Meets Ponseti Method and WHO Assistive Technology product specifications. Registered FDA and CE certified.
- Adjustable: Shoes can be set to 65˚ or 45˚ of abduction to accommodate bi- and unilateral cases.
- Manufacturing: Plastic parts are injection molded in the US. The shoes are made in China.

- 7 shoe sizes to fit children from 3 months to 5 years of age
- Shoes should be fitted to allow for some growth. The parents should be instructed to return for larger shoes once the toes start to protrude over the end of the shoes.

- for even heating of the Confidence Socket
- heated using a heat gun

Specifications:
Oven Hood, Stand, Silicone Base & Insulation Cap

- for fittings at the clinic and on the go
Weight: 4.4kg
Size: 30.5 x 12 x 17cm
Max. Vacuum: 0.8 bar
Flow Rate: 68 l/min

Functions and benefits:
The Module System, Transfemoral, Adult, is part of the Rehab'Impulse modular system that permits prosthetic fitting for various levels of amputation and disarticulation of the lower extremities. The adult transfemoral kit consists of a set of components allowing different alignment configurations.

Intended use:
The Rehab'Impulse module system, transfemoral, adult, is intended for prosthetic fitting of users with a body weight of up to 80 kg (P4). This product is not intended for excessive physical activities.

Compatibility:
The components included in the set are compatible with the Rehab'Impulse adult knee joints and prosthetic feet:
- 74-00243 Knee Joint, Monocentric, Adult, Beige
- 74-00244 Knee Joint, Monocentric, Adult, Olive
- 74-00245 Knee Joint, Monocentric, Adult, Terra
- 74-00246 Knee Joint, Polycentric, Adult, Beige
- 74-00247 Knee Joint, Polycentric, Adult, Olive
- 74-00248 Knee Joint, Polycentric, Adult, Terra
- Foot, SACH 2.0, sizes 22-28

Included in delivery*:
- 1x Cup, transfemoral adult
- 1x Convex disc
- 1x Conical cup, transfemoral, adult
- 1x Concave cylinder, M10, adult
- 1x Convex ankle washer, adult
- 1x Screw, countersunk head, FT, SS, M10x50
- 2x Flat washer, SS, 15/55/3
- 1x Flat washer, SS, 10.5/25/1.5
- 1x Hexagonal nut, SS, M10
- 1x Coiled spring expansion pin, SS, 5x45

Storage conditions:
- Store product in dry conditions
- Store at room temperature (ideally between 15°C and 25°C)
- Keep out of direct sunlight or other sources of light with a high UV content
- Take precautionary measures against sparking and fire

Environmental conditions:
Recommended environmental conditions:
- Temperature range for use : -10°C to 60°C (14°F to 140°F)
- Relative humidity 0% to 90%, no condensing situation
- Avoid exposure to dust, sand, salt water, acids and urine
*Please note: Knee joint and foot not included with the system. To be ordered separately

Functions and benefit:
The Module System, Transtibial, Adult, is part of the Rehab’Impulse modular system that permits prosthe- tic fitting for various levels of amputation and disarti- culation of the lower extremities. The adult transtibial kit consists of a set of components allowing different alignment configurations.

Intended use:
The Rehab’Impulse module system, transtibial, adult, is intended for prosthetic fitting of users with a body weight of up to 80 kg (P4). This product is not intended for excessive physical activities.

Compatibility:
The components included in the set are compatible with the Rehab’Impulse prosthetic feet:
- Foot, SACH 2.0, sizes 22-28

Included in delivery*:
- 1x Cup, TTA/TTC/TFC/LS
- 1x Convex disc
- 2x Concave cylinder, M10, adult
- 1x Convex ankle washer, adult
- 1x Screw, countersunk head, FT, SS, M10x60
- 1x Flat washer, SS, 15/44/3

Storage conditions:
- Store product in dry conditions
- Store at room temperature (ideally between 15°C and 25°C)
- Keep out of direct sunlight or other sources of light with a high UV content
- Take precautionary measures against sparking and fire

Environmental conditions:
Recommended environmental conditions:

- Temperature range for use : -10°C to 60°C (14°F to 140°F)
- Relative humidity 0% to 90%, no condensing situation
- Avoid exposure to dust, sand, salt water, acids and urine
* Please note : Foot not included with the system. To be ordered separately.

Functions and benefits:
The Heavy Duty Nut, M10, Long Stump, is part of the Rehab'Impulse modular system and is designed to provide compatibility with our child long stump kit and the Foot SACH 2.0 Adult. It is intended for childs with a long residual limb.

Intended use:
The Rehab'Impulse Heavy Duty Nut, M10, Long Stump, child, is intended for prosthetic fitting of users with a body weight of up to 80 kg (P4). This product is not intended for excessive physical activities.

Compatibility:
- 74-00229 Module System, Adult - Long Stump
- Foot SACH 2.0 Child – sizes 16 to 20

Included in delivery:
- 10x Heavy Duty Nut, M10

Storage conditions:
- Store product in dry conditions

Environmental conditions:
Recommended environmental conditions:
- Avoid exposure to dust, sand, salt water, acids and urine

Functions and benefits:
The Module System, Transfemoral, Child, is part of the Rehab'Impulse modular system that permits prosthetic fitting for various levels of amputation and disarticulation of the lower extremities. The child transfemoral kit consists of a set of components allowing different alignment configurations.

Intended use:
The Rehab'Impulse module system, transfemoral, child, is intended for prosthetic fitting of users with a body weight of up to 60 kg (P3). This product is not intended for excessive physical activities.

Compatibility:
The components included in the set are compatible with the Rehab'Impulse children knee joints and prosthetic feet:
- 74-00240 Knee Joint, Monocentric, Child, Beige
- 74-00241 Knee Joint, Monocentric, Child, Olive
- 74-00242 Knee Joint, Monocentric, Child, Terra
- Foot, SACH 2.0, sizes 14-21

Included in delivery*:
- 1x Cup, TTA/TTC/TFC/LS
- 1x Convex disc
- 1x Conical cup, transfemoral, child
- 1x Concave cylinder, M8, child
- 1x Convex ankle washer, child
- 1x Screw, countersunk head, FT, SS, M10x50
- 2x Flat washer, SS, 15/44/3
- 1x Flat washer, SS, 10.5/25/1.5
- 1x Hexagonal nut, SS, M10
- 1x Coiled spring expansion pin, SS, 5x40

Storage conditions:
- Store product in dry conditions
- Store at room temperature (ideally between 15°C and 25°C)
- Keep out of direct sunlight or other sources of light with a high UV content
- Take precautionary measures against sparking and fire

Environmental conditions:
Recommended environmental conditions:
- Temperature range for use : -10°C to 60°C (14°F to 140°F)
- Relative humidity 0% to 90%, no condensing situation
- Avoid exposure to dust, sand, salt water, acids and urine
*Please note: Knee joint and foot not included with the system. To be ordered separately

Functions and benefits:
The Module System, Transtibial, Child, is part of the Re- hab’Impulse modular system that permits prosthetic fitting for various levels of amputation and disarticulation of the lower extremities.The child transtibial kit consists of a set of components allowing different alignment configurations.

Intended use:
The Rehab’Impulse module system, transtibial, child, is intended for prosthetic fitting of users with a body weight of up to 60 kg (P3). This product is not intended for excessive physical activities.

Compatibility:
The components included in the set are compatible with the Rehab’Impulse prosthetic feet:
- Foot, SACH 2.0, sizes 14-21

Included in delivery*:
- 1x Cup, TTA/TTC/TFC/LS
- 1x Convex disc
- 2x Concave cylinder, M8, child
- 1x Convex ankle washer, child
- 1x Screw, countersunk head, FT, SS, M8x60
- 1x Flat washer, SS, 10.5/40/1.5

Storage conditions:
- Store product in dry conditions
- Store at room temperature (ideally between 15°C and 25°C)
- Keep out of direct sunlight or other sources of light with a high UV content
- Take precautionary measures against sparking and fire

Environmental conditions:
Recommended environmental conditions:

- Temperature range for use: -10°C to 60°C (14°F to 140°F)
- Relative humidity 0% to 90%, no condensing situation
- Avoid exposure to dust, sand, salt water, acids and urine
* Please note: Foot not included with the system. To be ordered separatly.

Functions and benefits:
The Module System, Long Stump, Adult, is part of the Rehab'Impulse modular system that permits prosthetic fitting at various levels of amputation and disarticulation of the lower extremities. The adult long stump kit consists of a set of components allowing different alignment configurations intended for adults with a long residual limb.

Intended use:
The Rehab'Impulse module system, long stump, adult, is intended for prosthetic fitting of users with a body weight of up to 80 kg (P4) and a long residual limb. This product is not intended for excessive physical activities.

Compatibility:
The components included in the set are compatible with the Rehab'Impulse prosthetic feet:
- Foot, SACH 2.0, sizes 22-28

Included In delivery:
- 1x Cup, TTA/TTC/TFC/LS
- 1x Convex disc
- 1x Concave ankle washer
- 1x Flat washer, SS, 15/44/3
- 1x Hexagonal nut, SS, M10

Storage conditions:
- Store product in dry conditions
- Store at room temperature (ideally between 15°C and 25°C)
- Keep out of direct sunlight or other sources of light with a high UV content
- Take precautionary measures against sparking and fire

Environmental conditions
Recommended environmental conditions:
- Temperature range for use : -10°C to 60°C (14°F to 140°F)
- Relative humidity 0% to 90%, no condensing situation
- Avoid exposure to dust, sand, salt water, acids and urine
Optional for foot fixation (not included in delivery)
- 74-00880 Heavy Duty Nut M10

ensures even vacuum distribution
does not bond to thermoplastic
ca. 10 m

Mobility degree : 1
Proximal connection : Pyramid adapter
Distal connection : Tube receiver
Knee flexion angle : 140°
System height : 90mm
Maximum body weight : 85kg

Functions and benefits:
The Knee Joint, Monocentric, Adult, is a durable and versatile prosthetic knee joint with an integrated manual locking system. This monocentric knee joint provides a bending angle of up to 125°.

Intended use:
The Rehab'Impulse monocentric knee joint, adult, is intended for prosthetic fitting of users with a body weight of up to 80 kg (P4). This product is not intended for excessive physical activities.

Compatibility:
The monocentric knee joint is compatible with the Rehab'Impulse modular system. A specially designed pyramid adapter kit (74-00337) offers compatibility with standard modular tube clamp adapters.

- 74-00134 Module System, Transfemoral, Adult
- 74-00337 Pyramid Adapter, Knee Joint, Adult

Included in delivery:
- 1x Knee Joint, Monocentric, Adult

Storage conditions:
- Store product in dry conditions
- Store at room temperature (ideally between 15°C and 25°C)
- Keep out of direct sunlight or other sources of light with a high UV content
- Take precautionary measures against sparking and fire

Environmental conditions:
Recommended environmental conditions:

- Temperature range for use : -10°C to 60°C (14°F to 140°F)
- Relative humidity 0% to 90%, no condensing situation
- Avoid exposure to dust, sand, salt water, acids and urine

Functions and benefits:
The Knee Joint, Monocentric, Child, is a durable and versatile prosthetic knee joint with an integrated manual locking system. This monocentric knee joint provides a bending angle of up to 125°.

Intended use:
The Rehab'Impulse monocentric knee joint, child, is intended for prosthetic fitting of users with a body weight of up to 60 kg (P3). This product is not intended for excessive physical activities.

Compatibility:
The monocentric knee joint is compatible with the Rehab'Impulse modular system:

- 74-00223 Module System, Transfemoral, Child

Included in delivery:
- 1x Knee Joint, Monocentric, Child

Storage conditions:
- Store product in dry conditions
- Store at room temperature (ideally between 15°C and 25°C)
- Keep out of direct sunlight or other sources of light with a high UV content
- Take precautionary measures against sparking and fire

Environmental conditions:
Recommended environmental conditions:

- Temperature range for use : -10°C to 60°C (14°F to 140°F)
- Relative humidity 0% to 90%, no condensing situation
- Avoid exposure to dust, sand, salt water, acids and urine

Mobility degree : 2
Proximal connection : Pyramid adapter
Distal connection : Tube clamp
Knee flexion angle : 140°
System height : 42mm
Maximum body weight : 55kg

Mobility degree : 2
Proximal & distal connection : Pyramid adapter
Knee flexion angle : 110°
System height : 47mm
Maximum body weight : 100kg
Material: Stainless Steel

cup, long sole, without dome

Length=410mm

Length=410mm

Length=430mm

Length=430mm

Functions and benefits
The Rehab'Impulse Passive Hand is a cosmetic hand made of soft thermoplastic polyurethane. Besides its natural appearance, it allows passive handling and holding of small objects. It is available in two sizes and four colours. The large size is recommended for men while the medium size is recommended for women and adolescents.
Both hand sizes feature an M10 interface.

Intended use
This product is intended for prosthetic fitting on adults and adolescents and is exchangeable with a hook or a working ring.

Compatibility
A wrist adapter will be made available shortly.

Included in delivery
- 1x Passive Hand

Storage conditions
- Store product in dry conditions
- Store at room temperature (ideally between 15°C and 25°C)
- Keep out of direct sunlight or other sources of light with a high UV content
- Take precautionary measures against sparking and fire

Environmental conditions
Recommended environmental conditions:
- Temperature range for use : -10°C to 60°C (14°F to 140°F)
- Relative humidity 0% to 90%, no condensing situation
- Avoid exposure to dust, sand, salt water, acids and urine

Above knee amputation, transfemoral

with pyramid, Stainless Steel & Alloyed Aluminium

Degré de mobilité 1-2, Hauteur du talon 10mm, Charge max. 125kg, matériau PU

Mobility degree : 3
Proximal connection : Pyramid adapter
Distal connection : Tube receiver
Knee flexion angle : 145°
System height : 153mm
Maximum body weight : 100kg