- Modular design: 3 bars sizes (150, 180, 220 mm) & 7 shoe sizes to fit children 3 months – 5 years old.
- Easy to use: Shoes clip on and off the bar to make putting the brace on the child much easier.
- Comfortable: Soft canvas shoes are lined to prevent blisters. Pronounced internal heel cup and inspection hole helps ensure the foot is positioned correctly in the shoe.
- Washable: Shoes and bar can be hand washed.
- Durable: Bar and shoes can be reused if in good condition.
- Child friendly design: Many parents report that this colorful, plastic brace feels less stigmatizing than other models.
- Medically Compliant: Meets Ponseti Method and WHO Assistive Technology product specifications. Registered FDA and CE certified.
- Adjustable: Shoes can be set to 65˚ or 45˚ of abduction to accommodate bi- and unilateral cases.
- Manufacturing: Plastic parts are injection molded in the US. The shoes are made in China.

Amputation: Below-knee (transtibial) amputees
Socket: Interim socket / Test socket
Remolds: 10 times
All-in-One: mounting plate attached
Offset: 1 cm
Suspension system: Passive vacuum (liner + sleeve) or Pin-Lock (Clutch)
Weight bearing: Total-Surface-Bearing (TSB)

suitable for marking socket contours
easy to wipe off
water soluble

Manual elbow joint with an anatomically shaped underarm for upper extremity mechanical prosthetic applications. The integrated locking system allows the joint to lock in 12 different positions. Flexion angle 120°

Manual elbow joint with an anatomically shaped underarm for upper extremity mechanical prosthetic applications. The integrated locking system allows the joint to lock in 12 different positions. Flexion angle 120°

Below knee amputation, transtibial

Above knee amputation, transfemoral

curved blade for soft curves and small radii
well suited for creating the socket contour
Kretzer, 9,5”/24 cm bent

Lara Carbon Foot is especially recommended for above, below-knee and hip amputation patients who are very active and under 125 kgs.
Due to its design, LARA offers many advantages for daily use for users with Mobility degrees 3 and 4.
Nothing stands in the way of sporting activities such as tennis, which subjects the user to greater impact stress. The LARA also allows for comfortable and energy-saving walking during the daily challenges at work and at home.
LARA’s innovative heel design enables users to perform daily activities with less energy consumption by storing the energy expended during activities and this reduces foot fatigue compared with conventional designs.

Due to its design, Lara offers many advantages for daily use for users with Mobility degrees 3 and 4.
Nothing stands in the way of sporting activities such as tennis, which subjects the user to greater impact stress. The Lara also allows for comfortable and energy-saving walking during the daily challenges at work and at home.

Lara’s innovative heel design enables users to perform daily activities with less energy consumption by storing the energy expended during activities and this reduces foot fatigue compared with conventional designs.

bar width: 14mm
bar thickness: 3mm
bar length: 317mm (Upper) / 292mm (Lower)
Material: Stainless Steel

bar width: 14mm
bar thickness: 3mm
bar length: 317mm (Upper) / 292mm (Lower)
Material: Stainless Steel

Used to ensure connection between ankle and foot
Length from joint
center=60mm

Degree of mobility: 1
Knee flexion angle: 140°

Degree of mobility: 2
Knee flexion angle: 165°

Product weight 370g
Load range 85kg
Knee flexion range 175°
Material Aluminum alloy 7075

Degree of mobility: 1
Knee flexion angle: 140°

Degree of mobility: 1
Knee flexion angle: 140°

Above and below knee amputation

Its kick is what makes Upya unique.
Thanks to its perfectly calibrated spring, you will feel the comfort you have the right to expect. You can choose between three spring rates, P3, P4 or P5.
WEIGHT: 106 grams
MATERIAL: 30% glass-filled polyamide; 304 stainless steel and HLE steel.

WARNING, it is recommended to have Upya and its spare parts installed by an orthopaedic professional.

- creates extra space in socket for sensitive areas when adjusting
Specifications: 6x silicones pads, 2 of each shape
Dimensions: 3 x 7 x 3cm, 7.5 x 8.2 x 3cm, 3.5 x 3.5 x 3cm

Degree of mobility: 3
Proximal connection: pyramidal adapter
Distal connection: tube receiver
Knee bending angle: 150 °

Degree of mobility: 3
Proximal connection: 3 Prong Socket Adapter (included)
Distal connection: tube receiver
Knee bending angle: 150°

Flexion angle: 145°
Mobility: 3

130°

130°

Upya’s comfort? That’s where it comes in!
The Upya heel consists of an extremely strong structural element made of 30% GF polyamide and a shock absorber similar to the soles of running shoes. You can choose between three density, P3,P4 or P5.
WEIGHT: 110 grams
MATERIAL: Polyamide 30% glass fibre reinforced; expanded polyurethane.

WARNING, it is recommended to have Upya and its spare parts installed by an orthopaedic professional.

Functions and benefits
The Heavy Duty Nut, M8, Long Stump, is part of the Rehab'Impulse modular system and is designed to provide compatibility with our adult long stump kit and the Foot SACH 2.0 Adult. It is intended for adults with a long residual limb.

Intended use
The Rehab'Impulse Heavy Duty Nut, M8, Long Stump, adult, is intended for prosthetic fitting of users with a body weight of up to 80 kg (P4). This product is not intended for excessive physical activities.

Compatibility
• 74-00229 Module System, Adult - Long Stump
• Foot SACH 2.0 Adult – sizes 14 to 21

Included in delivery
• 10x Heavy Duty Nut, M8

Storage conditions
• Store product in dry conditions

Environmental conditions
Recommended environmental conditions:

• Avoid exposure to dust, sand, salt water, acids and urine

Functions and benefits
The Heavy Duty Nut, M10, Long Stump, is part of the Rehab'Impulse modular system and is designed to provide compatibility with our adult long stump kit and the Foot SACH 2.0 Adult. It is intended for adults with a long residual limb.

Intended use
The Rehab'Impulse Heavy Duty Nut, M10, Long Stump, adult, is intended for prosthetic fitting of users with a body weight of up to 80 kg (P4). This product is not intended for excessive physical activities.

Compatibility
• 74-00229 Module System, Adult - Long Stump
• Foot SACH 2.0 Adult – sizes 22 to 28

Included in delivery
• 10x Heavy Duty Nut, M10

Storage conditions
• Store product in dry conditions

Environmental conditions
Recommended environmental conditions:

• Avoid exposure to dust, sand, salt water, acids and urine

Length=100mm

kit with 5 pairs of joints and 1 assembly threaded rod

kit with 5 pairs of joints and 1 assembly threaded rod

Upya is a DEMONTABLE biomechanical foot.
This means that you can change the toe to make a right foot a left foot, or a left foot a right foot! Easy, simple: Upya.
Don’t forget that the toe is fixed with a pin that you can find in the Upya screw kit.
Don’t forget that if you change the toe cap to the opposite side, you also have to change the Upya cosmetic shell.
WEIGHT: 60 grams
MATERIAL: 30% glass fiber reinforced polyamide

WARNING, it is recommended to have Upya and its spare parts installed by an orthopaedic professional.

Functions and benefits:
The Rehab’Impulse Prosthetic Foot SACH 2.0 (Solid-Ankle Cushion-Heel) is made of soft thermoplastic polyurethane moulded over a POM core. It is designed to provide the user with a cushioned heel and a flexible keel that offers a smooth rolling action during stance phase. The cosmetic toe allows wearing of sandals and gives the foot a natural appearance.

Intended use:
This product is intended for prosthetic fitting on children with activity levels K1 (household ambulator) and K2 (limited community ambulator).

Compatibility:
The Rehab’Impulse Foot SACH 2.0 is compatible with standard modular technology and the Rehab’Impulse module system.

- 74-00221 Module system, Transtibial, Child
- 74-00223 Module system, Transfemoral, Child

Included delivery:
- 1x Foot SACH 2.0, Child
- 1x Socket head cap screw, stainless steel, M8x80mm
- 1x Ribbed lock washer M8

Storage conditions:
- Store product in dry conditions
- Store at room temperature (ideally between 15°C and 25°C)
- Keep out of direct sunlight or other sources of light with a high UV content
- Take precautionary measures against sparking and fire

Environmental conditions:
Recommended environmental conditions:
- Temperature range for use : -10°C to 60°C (14°F to 140°F)
- Relative humidity 0% to 90%, no condensing situation
- Avoid exposure to dust, sand, salt water, acids and urine

Functions and benefits:
The Rehab'Impulse Prosthetic Foot SACH 2.0 (Solid-Ankle Cushion-Heel) is made of soft thermoplastic polyurethane moulded over a POM core. It is designed to provide the user with a cushioned heel and a flexible keel that offers a smooth rolling action during stance phase. The cosmetic toe allows wearing of sandals and gives the foot a natural appearance.

Intended use:
This product is intended for prosthetic fitting on adults with activity levels K1 (household ambulator) and K2 (limited community ambulator).

Compatibility:
The Rehab'Impulse Foot SACH 2.0 is compatible with standard modular technology and the Rehab'Impulse module system:

- 74-00137 Module system, Transtibial, Adult
- 74-00134 Module system, Transfemoral, Adult
- 74-00229 Module system, Long Stump, Adult
- 74-00227 Module system, Transfemoral Connector M10, Child

Included in delivery
- 1x Foot SACH 2.0, Adult
- 1x Socket head cap screw, stainless steel, M10x80mm
- 1x Ribbed lock washer M10

Storage conditions
- Store product in dry conditions
- Store at room temperature (ideally between 15°C and 25°C)
- Keep out of direct sunlight or other sources of light with a high UV content
- Take precautionary measures against sparking and fire

Environmental conditions:
Recommended environmental conditions:
- Temperature range for use : -10°C to 60°C (14°F to 140°F)
- Relative humidity 0% to 90%, no condensing situation
- Avoid exposure to dust, sand, salt water, acids and urine

Above knee amputation, transfemoral

Below knee amputation, transtibial

Max load: 125kg

Fixed lamination anchor with pyramid. Designed for lower extremity modular protheses
Max load 125kg

Max load: 65kg

Max load: 65kg

Max 125kg

Mobility degree 2-3, Heel height 10mm, Max. load 125kg, Material PU

Mobility degree 1-2, Heel height 10mm, Max. load 55kg, Material PU

Max 100kg

Max 125kg