Adapter tubes used to connect lower extremity modular prosthetic parts.

Aluminium

Length=410mm

for feet size: 14-21cm

Adapter tubes used to connect lower extremity modular prosthetic parts.

also referenced under: OCPOMODUZ00021, 2R2

Functions and benefits
The Pyramid Adapter, Knee Joint, Adult, is part of the Rehab'Impulse modular system and is designed to provide compatibility with standard modular tube clamp adapters used as interface with common modular hip joints.

Intended use
The Rehab'Impulse knee joint pyramid adapter, adult, is intended for prosthetic fitting of users with a body weight of up to 80 kg (P4). This product is not intended for excessive physical activities.

Compatibility
- 74-00243 Knee Joint, Monocentric, Adult, Beige
- 74-00244 Knee Joint, Monocentric, Adult, Olive
- 74-00245 Knee Joint, Monocentric, Adult, Terra
- 74-00246 Knee Joint, Polycentric, Adult, Beige
- 74-00247 Knee Joint, Polycentric, Adult, Olive
- 74-00248 Knee Joint, Polycentric, Adult, Terra

Included in delivery
- 1x Pyramid
- 1x Threaded pin M8/M10
- 1x Hexagonal Nut, SS, M8

Storage conditions
- Store product in dry conditions
- Store at room temperature (ideally between 15°C and 25°C)
- Keep out of direct sunlight or other sources of light with a high UV content
- Take precautionary measures against sparking and fire

Environmental conditions
Recommended environmental conditions:
- Temperature range for use : -10°C to 60°C (14°F to 140°F)
- Relative humidity 0% to 90%, no condensing situation
- Avoid exposure to dust, sand, salt water, acids and urine

• 10x Rubber Bumpers
• 10x Screw, M5, Stainless Steel

Max 100kg

also referenced under: OCPOMODU2R2, 2R41=1

- Modular design: 3 bars sizes (150, 180, 220 mm) & 7 shoe sizes to fit children 3 months – 5 years old.
- Easy to use: Shoes clip on and off the bar to make putting the brace on the child much easier.
- Comfortable: Soft canvas shoes are lined to prevent blisters. Pronounced internal heel cup and inspection hole helps ensure the foot is positioned correctly in the shoe.
- Washable: Shoes and bar can be hand washed.
- Durable: Bar and shoes can be reused if in good condition.
- Child friendly design: Many parents report that this colorful, plastic brace feels less stigmatizing than other models.
- Medically Compliant: Meets Ponseti Method and WHO Assistive Technology product specifications. Registered FDA and CE certified.
- Adjustable: Shoes can be set to 65˚ or 45˚ of abduction to accommodate bi- and unilateral cases.
- Manufacturing: Plastic parts are injection molded in the US. The shoes are made in China.

Max 125kg

Used to connect lower extremity modular prosthetic parts. The part is used with PR05. A4 - Wooden Connection Plate.

Suitable to use on below knee prostheses. Features a hole (diameter: 22mm) and can be used on both right and left side.

Functions and benefits:
The Module System, Transfemoral, Child, is part of the Rehab'Impulse modular system that permits prosthetic fitting for various levels of amputation and disarticulation of the lower extremities. The child transfemoral kit consists of a set of components allowing different alignment configurations.

Intended use:
The Rehab'Impulse module system, transfemoral, child, is intended for prosthetic fitting of users with a body weight of up to 60 kg (P3). This product is not intended for excessive physical activities.

Compatibility:
The components included in the set are compatible with the Rehab'Impulse children knee joints and prosthetic feet:
- 74-00240 Knee Joint, Monocentric, Child, Beige
- 74-00241 Knee Joint, Monocentric, Child, Olive
- 74-00242 Knee Joint, Monocentric, Child, Terra
- Foot, SACH 2.0, sizes 14-21

Included in delivery*:
- 1x Cup, TTA/TTC/TFC/LS
- 1x Convex disc
- 1x Conical cup, transfemoral, child
- 1x Concave cylinder, M8, child
- 1x Convex ankle washer, child
- 1x Screw, countersunk head, FT, SS, M10x50
- 2x Flat washer, SS, 15/44/3
- 1x Flat washer, SS, 10.5/25/1.5
- 1x Hexagonal nut, SS, M10
- 1x Coiled spring expansion pin, SS, 5x40

Storage conditions:
- Store product in dry conditions
- Store at room temperature (ideally between 15°C and 25°C)
- Keep out of direct sunlight or other sources of light with a high UV content
- Take precautionary measures against sparking and fire

Environmental conditions:
Recommended environmental conditions:
- Temperature range for use : -10°C to 60°C (14°F to 140°F)
- Relative humidity 0% to 90%, no condensing situation
- Avoid exposure to dust, sand, salt water, acids and urine
*Please note: Knee joint and foot not included with the system. To be ordered separately

cup, long sole, without dome

Functions and benefits:
The Module System, Transtibial, Child, is part of the Re- hab’Impulse modular system that permits prosthetic fitting for various levels of amputation and disarticulation of the lower extremities.The child transtibial kit consists of a set of components allowing different alignment configurations.

Intended use:
The Rehab’Impulse module system, transtibial, child, is intended for prosthetic fitting of users with a body weight of up to 60 kg (P3). This product is not intended for excessive physical activities.

Compatibility:
The components included in the set are compatible with the Rehab’Impulse prosthetic feet:
- Foot, SACH 2.0, sizes 14-21

Included in delivery*:
- 1x Cup, TTA/TTC/TFC/LS
- 1x Convex disc
- 2x Concave cylinder, M8, child
- 1x Convex ankle washer, child
- 1x Screw, countersunk head, FT, SS, M8x60
- 1x Flat washer, SS, 10.5/40/1.5

Storage conditions:
- Store product in dry conditions
- Store at room temperature (ideally between 15°C and 25°C)
- Keep out of direct sunlight or other sources of light with a high UV content
- Take precautionary measures against sparking and fire

Environmental conditions:
Recommended environmental conditions:

- Temperature range for use: -10°C to 60°C (14°F to 140°F)
- Relative humidity 0% to 90%, no condensing situation
- Avoid exposure to dust, sand, salt water, acids and urine
* Please note: Foot not included with the system. To be ordered separatly.

Max load: 125kg

Length=410mm

Fixed lamination anchor with pyramid. Designed for lower extremity modular protheses
Max load 125kg

for feet size: 22-25cm

for feet size: 26-29cm

long shape that protects hands and wrists
tight-fitting for good dexterity when shaping sockets
one size (size 9), with Para-Aramid, seamless

Upya is a DEMONTABLE biomechanical foot.
This means that you can change the toe to make a right foot a left foot, or a left foot a right foot! Easy, simple: Upya.
Don’t forget that the toe is fixed with a pin that you can find in the Upya screw kit.
Don’t forget that if you change the toe cap to the opposite side, you also have to change the Upya cosmetic shell.
WEIGHT: 60 grams
MATERIAL: 30% glass fiber reinforced polyamide

WARNING, it is recommended to have Upya and its spare parts installed by an orthopaedic professional.

Adapter tubes used to connect lower extremity modular prosthetic parts.

also referenced under: OCPOMODUZ00021, 2R2

Shaped ankle wedge to be used together with PR01.S1, PR01.D1 and PR02.AV.M10

Shaped ankle wedge to be used together with PR01.S1, PR01.D1 and PR02.AV.M10

- 7 shoe sizes to fit children from 3 months to 5 years of age
- Shoes should be fitted to allow for some growth. The parents should be instructed to return for larger shoes once the toes start to protrude over the end of the shoes.

Adapter tubes used to connect lower extremity modular prosthetic parts.

also referenced under: OCPOMODUZ00021, 2R2

Degree of mobility 2-3
Heel height 10mm
Max load: 20-21=90kg, 22-25=95kg, 26-30=100kg
Cosmetic material: PU
Core material: Wood

also referenced under: OCPOMODU4R21, 4R66

BRAND: ORTHOPUS
This kit includes:
- 5 rubber bands to vary the grip strength
- a washer to block the rotation of the hook on a wrist nut
- one pair of black silicone grips

BRAND: ORTHOPUS
Material: stainless steel
Dimensions: Ø53
Weight: 40.8g
Thread: M10
Made in France
It allows you to use all kinds of tools for everyday life by quickly attaching them to the universal wrist (REF 80 P 20.W).

Used to ensure connection between ankle and foot
Length from joint
center=60mm

Used to ensure connection between ankle and foot
Length from joint
center=60mm

Length=100mm

The Upya aesthetic clip is specially designed to fit the ankle of your Upya foot.
Its flat surface facilitates the application of an aesthetic leg foam.
WEIGHT: 20 grams
MATERIAL: PLA 3D impression

WARNING, it is recommended to have Upya and its spare parts installed by an orthopaedic professional.