Ausrüstung:
Schnellspannvorrichtung, zwei aufblasbare Spannvorrichtungen zum Anbringen von Sockeln, Halter für Kniegelenkadaptereinsätze, integriertes Messzubehör, z. mm Lineale, Goniometer, höhenverstellbare Fußplatte, TT- und TF-Ausrichtungspads. Zur Bankausrichtung von modularen Ottobock-Prothesen für die unteren Extremitäten (TF und TT) gemäß den Empfehlungen zur Ottobock-Ausrichtung
Maße:
BxTxH 800 x 900 x 2.100 mm
31 1/2 x 35 3/8 x 82 5/8 Zoll
Lieferumfang:
Enthält einen rechten und einen linken Adaptereinsatz für Ottobock-Kniegelenke (Artikelnummern des Adaptereinsatzes: 743Y579, 743Y580, 743Y581, 743Y582, 743Y583, 743Y584, 743Y608, 743Y629, 743Y681)

The adapter sleeves are slid onto the 743Y55 alignment axis and positioned in the plaster negative. Adapter sleeve made of rigid foam for receiving the 743Y56 adjustment adapters in the plaster positive.

4-chamber purification system, easy to clean with film insert, visual inspection of the height of the slurry thanks to transparent container, no odour nuisance thanks to closed system, no overflow, 2 inch diameter discharge connection
Equipment Transparent container with film insert and quick-release lock to be used for separating plaster; to be installed beneath the plaster/washing basin
Dimensions Ø x H 13 3/8 x 12 5/8 inch
Scope of delivery 1 supply hose, straight, length 19 5/8 inch, 1 1/2" 1 flexible drain hose, length 19 5/8 inch, outflow 2 - 1 5/8 inch

To be used for creating a plaster negative of the foot with various heel heights and adjustable tip
lift in the forefoot area, especially appropriate for AFO, KAFO, inserts.

Scope of delivery: 1x base plate, 1x forefoot wedge, guide rods, 1/4 inch foot rest, 4x 3/4 inch height
adjustment plate, 1x 3/8 inch height adjustment plate, 1x 1/4 inch height
adjustment plate

For attachment to the Ottobock 743A11 casting apparatus. Provides functional casting of ischial containment sockets while bearing weight. Has pneumatic pressure adjustment and a short-stroke cylinder. Pressure regulator provides individual pressure adjustment of the femoral pad. The pneumatic unit of the SIT* cast casting apparatus can be directly connected to the compressed air supply system (connecting hose and service unit with pressure regulator are not included in the delivery).
Scope of Delivery:
ncludes 8 SIT-casting forms: 743Y50=L1, =R1, =L2, =R2, =L3, =R3, =L4, =R4

Equipment 2x 743Y26 pressure blocks
Dimensions WxDxH 235 x 350 x 59 mm
Weight 2.8 kg
To be used for Plaster casting for hip/knee disarticulation patients

To be used for three-dimensional alignment of leg orthoses and positioning of knee and ankle joint points on a plaster negative or plaster positive.
Dimensions WxDxH: 270 x 380 x 770 mm

Lock 7H08A is intended for use in tibia (including for the manufacture of sockets according to express prosthetics technology) and femur prosthesis.
The principle of locking is the same as for the lock 7H 05A. Consists of an insert with a hemisphere and an area under 4 holes (installed on plaster positive before lamination or thermoforming) and the lock case (installed during assembly of the prosthesis on the outside of the socket). In the distal part of the lock there are holes for mounting adapter - 7H01K, 7H02K, or 7H03K. Complete with 8 steel screws, plastic cone and screw for locking an insert on the positive.
Activity level: М1, М2, М3, М4
Maximum weight of patient: 125kg
Material: Aluminum alloy
Maximum weight of patient: 125kg
Weight 175g