230V/500W
High-end quality made in Switzerland

Welding mirror with Teflon coating and automatic temperature control. Suitable for indoor and outdoor use.

Diameter: 280mm
Weight: 3.0kg
Power consumption: 900 Watts / 230 Volts 50 Hz
Design: straight
Includes device stand.

also referenced under: OOMAOWELPR28, CRM 7, BARY A-2

Tough industrial soldering irons with Ersadur long−life soldering tips (30 times the working life of conventional copper soldering tips). Warm−up time 3 min. (for size 300, approx. 5 min.). Power cable 1.5 m rubber cable (PVC for size 30). With support stand (not size 30).
Powerful soldering iron for copper cables up to 6 mm2 cross section.
Soldering tip width: 5.3 mm
Heating power: 150 W
Soldering tip temperature after 3 minutes: 450 °C
suitable for copper cross sections up to: 6 mm2

also referenced under: OOMAOWELIE15, CRM 10, 0155JD

The most efficient oscillating machines, available in three power categories (SuperCut, MultiMaster, MultiTalent); new model with Starlock tool carrier (optimized power transmission for up to 35% faster working speed).
Almost unlimited applications (sawing, grinding, scraping, cutting, grating) thanks to the oscillating movement (low dust emission).
Electronic progressive adjustment of the rotation speed for optimal use.
Maximum quality and stability thanks to the metal gear case and the combined use of ball and needle bearings.
Optimal maneuverability thanks to the ergonomic design and the Softgrip coating, reduced weight.
Powerful MultiTool for rapid progress (for interior design and renovation) with more than 30 accessories for sawing in wood and metal, sanding, cutting tiles, etc.
Delivery:
Set of 30 accessories, 1 × suction device, 1 × plastic tool case.
Set of 30 accessories: 1 × E-Cut Long-Life saw blade - (10 mm), 2 × E-Cut Long-Life saw blades (35 mm), 2 × E-Cut Long-Life saw blades ( 65 mm), 1 × E-Cut Carbide Pro saw blade (32 mm), 1 × carbide saw blade (⌀ 75), 1 × carbide rasp (triangular), 1 × spatula, 1 × perforated backing pad , 1 × perforated sanding sheet each (grit 60, 80, 120, 180).
With 1 × ALG 80 rapid charger, 2 × Li-Ion batteries (18 V / 3 Ah).
1 “Akku” case with charger, 1 backing pad, 3 sanding sheets each (grain 60, 80, 120, 180), 1 fixed spatula, 1 HSS segment saw blade, 1 Long-Life E- saw blade Cut (65 mm), 1 E-Cut universal saw blade (44 mm).
Manufacturer no .: AFMM 18 QSL
Number of batteries included: 2
Battery type: Lithium-ion
Battery capacity: 3 A h
Battery voltage: 18V
Tool holders: StarlockPlus, Starlock
Number of oscillations: 11'000 min-¹ - 18'500 min-¹
Oscillation angle: 3.4 °
Angle approach of the support plate: 80 mm
Weight: 1.8 kg

Market-leading oscillating tools in three different performance classes (SuperCut, MultiMaster, MultiTalent) in a new version with Starlock tool arbor (improved torque transmission of up to 35 % greater rate of progression of the work).
Virtually unlimited application possibilities (sawing, grinding, scraping, cutting, rasping) due to the oscillating mode of movement (low generation of dust).
Stepless electronic speed control for optimum working.
Very high quality and stability thanks to the metal gearbox and use of ball bearings and needle bearings throughout.
Optimum handling due to ergonomic design with soft-grip inlays and low weight.
Supplied with:
1 toolbox set “QuickStart” containing:1 abrasive plate, 3 each abrasive discs (80, 120, 180 grit), 1 E-Cut universal saw blade (44 mm).
Packaging: Carrying case
Manufacturer's designation: MM 300 Plus Start
Power consumption: 250 W
Toolholder: StarlockPlus, Starlock
Speed of oscillation: 11,000 min-1 - 20,000 min-1
Amplitude (oscillation movement): 2 × 1.6 degrees
Weight: 1.4 kg
Cable length: 5 m
OOMAOSAWOS01

Effective delivery volume approx: 1000 l/min
Maximum Pressure: 10 bar
Pressure vessel capacity: 500 l
Air outlet: ¾ "
Length approx: 1980 mm
Width/depth approx: 700 mm
Height approx: 1630 mm
Weight approx: 307 kg
Absorbed power electric motor: 7.5 kW
Supply voltage: 400 V
Mains frequency: 50 Hz
Motor type: Electric
Sound pressure level Lp: 68 dB(A)

- Designed for demanding continuous use when oil-free and clean compressed air is required
- Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
- Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
- Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
- The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon
High-quality maximum equipment
- Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous dirt, oil and condensate separation
- One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
- Two comfort safety quick couplings
- High-quality CONDOR pressure switch
- One pressure gauge each for container and working pressure
- Simple condensate drain via ball valve
Compressed air lines and reservoirs with long service life
- Flexible armored hose line with heat protection prevents vibration fractures
- Inside and outside hot-dip galvanized, corrosion-protected compressed air tank with 15-year guarantee against rusting through
Comfort safety quick couplings
- One-hand safety couplings according to DIN EN 983 used as standard by AIRCRAFT as first manufacturer
- Two separate locking systems for maximum working safety
- No whipping of the hose line during uncoupling
Convenient transport
- Transport back-friendly in upright position and without lifting
- Additional transport handle directly on the container
- Puncture-proof PU foam wheels
- Stable steering chassis with parking brake
TÜV-free
- Type-tested by an approved monitoring body
- Recurring container inspections also possible by a competent person
Immediately ready for use
- Fully automatic on-off operation
- With all safety devices
- Completely ready for connection

also referenced under: AIRPROFI 440/100 OF PRO, EMACAIRCO380, CRM 178

- Designed for demanding continuous use when oil-free and clean compressed air is required
- Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
- Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
- Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
- The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon
High-quality maximum equipment
- Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous separation of dirt, oil and condensate
- One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
- Two comfort safety quick couplings
- High-quality CONDOR pressure switch
- One pressure gauge each for tank and working pressure
- Simple condensate drain via ball valve
Compressed air lines and reservoirs with long service life
- Flexible armored hose line with heat protection prevents vibration fractures
- Inside and outside hot-dip galvanized, corrosion-protected compressed air reservoir with 15-year warranty against rusting through
Comfort safety quick couplings
- One-hand safety couplings according to DIN EN 983 used by AIRCRAFT as the first manufacturer in series production
- Two separate locking systems for maximum working safety
- No whipping of the hose line during uncoupling
Convenient transport
- Transport back-friendly in upright position and without lifting
- Additional transport handle directly on the container
- Puncture-proof PU foam wheels
- Stable steering chassis with parking brake
Immediately ready for use
- Fully automatic on-off operation
- With all safety devices
- Completely ready for connection

also referenced under: AIRPROFI 220/50 OF PRO, CRM 178.3

- Units with high-performance oil lubrication system, efficient lubrication with optimum sealing at the same time
- Pressure regulator for continuously variable setting of the desired working pressure
- Compressed air outlet via one single-handed quick-action coupling
- Fully automatic on-off operation via pressure switch
- One pressure gauge each for displaying the tank and working pressure
- Electric motor equipped with protection switch
- Powder coated compressed air tank
- Two plastic wheels at rear

also referenced under: MOBILBOY 261/24 E

Sheet steel drawer units. Central closure by cylinder lock. Drawers with large aluminum handle bar and label holder, extendable up to 90%. Interior with notched walls for compartmentalization of drawers.
Established load capacity / table - Maximum load per compartment distributed over the surface (on the wood): 2,000 kg
Worktop thickness: 50 mm
Established height: 850 mm
Worktop material: Beech plywood
Usable width of drawers: 490 mm
Drawer cabinet depth: 630 mm
Usable depth of drawers: 520 mm
Width of drawer unit: 600 mm

Worktop 50 mm thick. Holes are provided for fixing drawers and legs.
Base in sturdy U-shaped steel profile. Drawer unit with 720 mm useful height and central closure. Equipped with 5 drawers (partial extraction).
Worktop in beech plywood, glued, waterproof. With colorless UV varnish.
Drawer units 600 mm wide in sheet steel with cylinder lock with 2 keys and central locking. Sheet steel drawer with large aluminum handle bar, extendable up to 90%. Designed for compartmentalization. The drawer units can be mounted on the right, left or in the center of the worktop. For a plan length of 1500 mm, possibility of mounting 2 - 3 boxes, for a plan length of 2000 mm, possibility of mounting 3 - 4 boxes (depending on the width of the boxes).
Legs in folded sheet steel (80 mm wide), with reinforcements.
Drawer units to be mounted on the right or on the left.
Front height of drawers: 60; 100; 140; 180; 240 mm
Colors: RAL 7035 light gray body and feet, RAL 5005 signal blue drawers, powder-coated. For other paintings, price on request.
Note (s): Delivery by separate elements, more economical. Delivery without assembly.
Established height: 850 mm
Allowable load of drawers / extendable shelves: 100 kg
Established load capacity / table - Maximum load per compartment distributed over the surface (on the wood): 1,000 kg
Worktop thickness: 50 mm
Drawer extraction (partial / total): 90%
Cylinder lock: Modular cylinder
Safety certificate: GS TÜV Süd
Worktop length: 1,500 mm
Worktop depth: 700 mm
Worktop thickness: 50 mm
Drawer cabinet height: 800 mm
Drawer cabinet width: 600 mm
Drawer cabinet depth: 630 mm
Usable width of drawers: 490 mm
Usable depth of drawers: 520 mm
Number of drawers: 5
Worktop material: Multiply beech
Worktop surface: colorless varnish

Worktop 50 mm thick, robust, in beech plywood, water resistant, colorless UV varnish. Support legs of folded sheet metal (80 mm wide), with cross braces.Colors: RAL 7035 light gray tubes, powder coated.
Worktop thickness: 50mm
Established admissible load / table - Maximum load per compartment distributed over the surface (on the wood): 400 kg
Worktop depth: 700 mm
Worktop thickness: 50 mm
Worktop length: 1500 mm
Established height: 850mm

Worktop 30 mm thick, robust, in beech plywood, water resistant, colorless UV varnish. Frame in screwed square tubes (30 × 30 mm), with plastic glides.
Colors: RAL 7035 light gray tubes, powder coated.
Worktop thickness: 30mm
Established admissible load / table - Maximum load per compartment distributed over the surface (on the wood): 250 kg
Worktop depth: 700 mm
Worktop thickness: 30 mm
Worktop length: 1500 mm
Established height: 850mm

Worktop 50 mm thick. Holes are provided for securing drawer units and support legs.
Worktop of beech marine ply, with waterproof glue. Finished with clear UV varnish.
Drawer unit 600 mm wide of sheet metal with cylinder lock with 2 keys and central lock. Drawer units can be mounted on the right, left or centre of the worktop. Worktops of 1500 mm can accept 2 − 3 units, worktops of 2000 mm can accept 3 − 4 units (depending on the width of the units). Drawers of sheet metal with wide aluminium grip handles. − Can be pulled out 90% − With slots for drawer dividers on the inner faces.
Support legs of folded sheet metal (80 mm wide), with cross braces.
Fitted with:
Drawer front height: 60; 80; 100 mm
Supplied for self-assembly, saving freight costs. Delivered unassembled.
Technical Data
Material thickness 1 mm
Workbench height 850 mm
Drawer/pull-out shelf load capacity 100 kg
Workbench/desk load capacity - maximum distributed load (on wood) 400 kg
Insert thickness 50 mm
Drawer runner extension (partial/full extension) 90 %
Cylinder lock modular barrel
Safety certificate GS TÜV Süd
Series KOMBI workbench
Height: 850mm
Worktop length: 1,500mm
Worktop depth: 700mm
Worktop thickness: 50mm
Drawer body height: 300mm
Drawer body width: 600mm
Drawer body depth: 630mm
Drawer usable width: 490mm
Drawer usable depth: 520mm
Number of drawers: 3
Material of worktop: Beech marine ply
Surface worktop: clear varnished

Worktop 50 mm thick. Holes are provided for securing drawer units and support legs.
Worktop of beech marine ply, with waterproof glue. Finished with clear UV varnish.
Drawer unit 600 mm wide of sheet metal with cylinder lock with 2 keys and central lock. Drawer of sheet metal with wide aluminium grip handles, can be pulled out 90 %. With slots for drawer dividers on the inner faces. Drawer units can be mounted on the right, left or centre of the worktop. Worktops of 1500 mm can accept 2 − 3 units, worktops of 2000 mm can accept 3 − 4 units (depending on the width of the units).
Support legs of folded sheet metal (80 mm wide), with cross braces.
Rear panels of folded sheet metal, 25 mm deep.
Fitted with:
Drawer front height: 60; 80; 100 mm
Supplied for self-assembly, saving freight costs. Delivered unassembled.
Technical Data
Material thickness 1 mm
Workbench height 850 mm
Drawer/pull-out shelf load capacity 100 kg
Workbench/desk load capacity - maximum distributed load (on wood) 800 kg
Insert thickness 50 mm
Drawer runner extension (partial/full extension) 90 %
Cylinder lock modular barrel
Safety certificate GS TÜV Süd
Series KOMBI workbench
Height 850 mm
Worktop length: 1,500 mm
Worktop depth: 700 mm
Worktop thickness: 50 mm
Drawer body height: 300 mm
Drawer body width: 600 mm
Drawer body depth: 630 mm
Drawer usable width: 490 mm
Drawer usable depth: 520 mm
Number of drawers: 3
Material of worktop: Beech marine ply
Surface worktop: clear varnished

Made of folded sheet metal, 25 mm high.
Application:
As shelf and as additional bracing.
For installation between two support legs.
Colour:
RAL 7035 light grey powder-coated.
Technical Data
Material thickness 1 mm
Series KOMBI-filebænk
Width 1,340 mm
Depth 2-part 630 mm
suitable for worktop length 1,500 mm
Load capacity, distributed 300 kg

Made entirely of forged steel − guaranteed unbreakable.
Opens forward. With forged pipe jaws underneath the normal jaws
74-01803

Made entirely of forged steel − guaranteed unbreakable.
Opens forward. With forged pipe jaws underneath the normal jaws

Made entirely of forged steel − guaranteed unbreakable.
Opens forward. With forged pipe jaws underneath the normal jaws

Heavy-duty, heavy-duty, steel / die-cast construction. Very low vibrations and precise guidance thanks to CNC machined components. Very powerful clamping thanks to the special clamping device. An integrated compressed gas spring ensures that the weight is balanced when adjusting the height of the vice. Locking in any position by means of a safety clamping lever.
The vise can be rotated 360 ° in conjunction with the vertical mover without an additional swivel base to bring a workpiece into the most favorable working position. The safety clearance required by DIN 31001, part 1 (25 mm) is thus observed for all oscillation and movement movements in height.
To adapt the vice to the nearest centimeter to the ideal working height (particularly important for learning and training workshops).
Delivery:
Fixing screws included for bench mounting.
Height adjustment range: 242 mm
Adjustable on a bench table: 93 mm - 335 mm
Weight: 11.2 kg

The lightweight welder's glove, material: premium cowhide / split leather 1.2 mm, resistant split leather cuff, controlled absence of harmful substances, length 35 cm, neutral pH for the skin, finger mobility: level performance 5, water vapor permeability: 13.1 m² / h, protection according to category 2, EN 388

also referenced under: EMACWELDWEGL, CRM 19

size 10

also referenced under: APROGLOVIS10, CRM 422

PU coated assembly gloves for precision work in dry working environments. Good tactile sensitivity and high breathability. Particularly suitable for precision handling of small electronic parts, maintenance work, inspection, assembly activities.
Standard: EN 388; EN 420
Base material: Polyamide (Nylon)
Coating: PU

also referenced under: APROGLOVNPU

Full grain leather gloves fit well for a better grip. Optimal support thanks to the elastic wrist strap.
Material: Full grain leather
EN 388: 2016
White colour

also referenced under: APROGLOVHD...

Protection against bacteriological risks according to EN 374

Filter class KN95, particularly suitable for harmful carcinogenic, radioactive substances (viruses, bacteria, fungal spores) and harmful, toxic particles (dust, smoke, aerosols)

Filter class FFP2, particularly suitable for harmful carcinogenic, radioactive substances (viruses, bacteria, fungal spores) and harmful, toxic particles (dust, smoke, aerosols)

Series of classic respiratory protection masks with foldable body. The robust headband and the flexible nose cover molded in the mask material allow an easy adaptation of the mask to each face morphology. With soft foam insert at the nose for optimal sealing. The powerful filter material provides optimal protection in addition to low respiratory resistance. Hygienic individual packaging.
With exhalation valve.

Lightweight, comfortable and stable simple protective eyewear, also characterized by a comfortable wearing, without pressure points, thanks to the pressure distribution technology of the 3M ™ temples. Thanks to their flat and wide temples, the glasses also protect the temples and the side part of the eyes. Both flexible and robust.
Standard:
EN 166; EN 170

Lightweight protective glasses with flexible arms without hinges, two-material, comfortable to wear. With flexible bridge for greater comfort. The curved glass offers very good side protection and 180 ° vision without distortions. 100% metal free.
Nor me:
EN 166; EN 170

also referenced under: APROGLASCLEA, CRM 423

Clear rigid plastic, side protection

Version:
Classic respirator series with pre-formed mask bodies. Comfort features such as flexible nose clip and a soft foam overlay, ensure a particularly good fit and optimum seal seating. The headbands have no clips, so do not provoke skin irritation. With high-performance filter medium to reduce breathing resistance.
Note:
This FFP1 mask filters at least 80% of all particles from the air. Respiratory mask with protection class FFP1.

Technical Data
Screen characteristics: flexible nose clip
Set contents: 20
Protection level: FFP1 NR D
Protection class: FFP1
Contents: 20
Type of product: Particle filter mask FFP1

also referenced under: APROMASKDC, CRM 424

also referenced under: EHDWSANQCA05, CRM 480

also referenced under: EHDWSANDCG05, EHDWSANDCG15, CRM 481, CRM 482