Boîtier en plastique avec clip-ceinture amovible. Rembobinage automatique amorti et blocage du ruban. Crochet terminal mobile, CRM 391

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
Application:
For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Of PB Swiss Tools special steel combining maximum hardness with exceptional toughness.
Drive profile: Hexagon screwdriver
Hexagon: 6 mm
overall length: 50 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
Application:
For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Of PB Swiss Tools special steel combining maximum hardness with exceptional toughness.
Drive profile: Hexagon screwdriver
Hexagon: 5 mm
overall length: 50 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
Application:
For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Of PB Swiss Tools special steel combining maximum hardness with exceptional toughness.
Drive profile: Hexagon screwdriver
Hexagon: 4 mm
overall length: 50 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
Application:
For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Of PB Swiss Tools special steel combining maximum hardness with exceptional toughness.
Drive profile: Hexagon screwdriver
Hexagon: 3 mm
overall length: 50 mm
Bit hexagon shank: E6.3

Elbow body; optimized lengths. Maximum hardness while being particularly tenacious thanks to the special PB Swiss Tools alloy.
With ball head that can be used obliquely up to an inclination of 30 °. Chrome-plated surface on nickel.

Elastic paddle in stainless steel strip, flat ovoid wooden handle.

Octagonal body, uncoated head

Octagonal body, uncoated head

Tape measure of light quality, for everyday use. Yellow/white ribbon in polyfiber fabric with black graduation on both sides. Metal tip at both ends.
Length: 150cm
Width: 18.5mm

D100mm

also referenced under: OOMADUSTAS04, CRM 107.2

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
Application:
For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Of PB Swiss Tools special steel combining maximum hardness with exceptional toughness.
Drive profile: Hexagon screwdriver
Hexagon: 8 mm
overall length: 50 mm
Bit hexagon shank: E6.3

Multimatized handle with grip zone optimized for torque and comfort

Elbow body; optimized lengths. Maximum hardness while being particularly tenacious thanks to the special PB Swiss Tools alloy.
With ball head that can be used obliquely up to an inclination of 30 °. Chrome-plated surface on nickel.

Of stainless spring steel strip.
Clean electrolytically applied black graduations and figures with a smooth surface. Easy to read. Rounded edges to prevent injuries.
Upper and lower edges both with 1 mm graduations.

Elbow body; optimized lengths. Maximum hardness while being particularly tenacious thanks to the special PB Swiss Tools alloy.
With ball head that can be used obliquely up to an inclination of 30 °. Chrome-plated surface on nickel.

Multimatized handle with grip zone optimized for torque and comfort

Unscrewable steel handles. With 5 clamping screws for fixing the die. Up to ref. 65 × 25 in die-cast zinc, from item no. 75 × 20 in steel.
For ⌀ die: 20mm
Height: 5mm
Total length: 175mm

Small model for 15mm and 25mm straps dim : 140m x 50 mm
Large model for 25mm and 38mm straps dim. 140m x 62mm
XXL Model for 38 mm and 49 mm straps dim: 140 x 74 mm

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
Application:
For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Of PB Swiss Tools special steel combining maximum hardness with exceptional toughness.
Drive profile: Hexagon screwdriver
Hexagon: 10 mm
overall length: 50 mm
Bit hexagon shank: E6.3

Stainless Steel

diam. 125mm, 0.5l

Made of flat-oval steel, hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering.

Unscrewable steel handles. With 5 clamping screws for fixing the die. Up to ref. 65 × 25 in die-cast zinc, from item no. 75 × 20 in steel.
For ⌀ die: 25mm
Height: 9mm
Standard: EN 22568
Total length: 210mm

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on 3 faces; square end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form A
Length without tang: 200 mm

Multimatized handle with grip zone optimized for torque and comfort,

foam polyester elastic exercise ball
Ø 65 mm

Strong, forged design, special tough varnish; taper section (cutting part) bright metal. Slight internal taper for releasing the cut pieces.

Upholstery made of steel wires

Straight hexagonal shank with ball point.
Kraftform handle made of impact-resistant plastic with integral soft zones. Blade of high quality tool steel, surface matt chrome-plated, black tips.

made of premium steel, with round, curved and plastic-coated shank, flexible blades, polished

made of premium steel, with round, curved and plastic-coated shank, flexible blades, polished

Elbow body; optimized lengths. Maximum hardness while being particularly tenacious thanks to the special PB Swiss Tools alloy.
With ball head that can be used obliquely up to an inclination of 30 °. Chrome-plated surface on nickel.

Disposition of the blades around the axis of the tool

Straight hexagonal shank with ball point.
Kraftform handle made of impact-resistant plastic with integral soft zones. Blade of high quality tool steel, surface matt chrome-plated, black tips.

Center drill with radius type R

also referenced under: OOMAVAPUCR10D, CRM 64

Multi-component power grip. Blade of chrome vanadium steel, surface chrome-plated. Chrom-Top tips for optimum rust protection.
overall length: 82 mm
Blade length: 25 mm
for screw ⌀: 2.1 − 3 mm
Cross-head size: 1

Made of tough rubber (90 Shore), non-rebound; with powerful impact. Worn faces can be reworked by turning on a lathe. With ash wood handle.
Head length: 90 mm
Head ⌀: 54 mm
Weight: 300 g
Handle length: 320 mm

Multimatized handle with grip zone optimized for torque and comfort