Suitable for:
Wire cable cutter

also referenced under: OOMAVAPUCR10P, CRM 63

Straight hexagonal shank with ball point.
Kraftform handle made of impact-resistant plastic with integral soft zones. Blade of high quality tool steel, surface matt chrome-plated, black tips.

Bow made of oval, varnished steel tube with clamping lever. Saw blade made of original Swedish steel. With hardened tooth tips. Precision ground and exactly set.
Rip-toothed (HZ) 4 teeth before the raker − always sharp. For all types of wood, particularly green wood.
Tooth profile: Rip-toothed
Blade length: 760 mm
Blade height: 18 mm

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Chrome-plated, black tips. Size TX20 − TX40 with side drive.

also referenced under: OOMAVAPUCR10H, CRM 61

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Made of flat-oval steel, hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering.

Forged by stamping. With opening to tight tolerances

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Internal brushes with galvanised twisted wire core and plain helix of bristles.
Helical brush section of waved steel wire.
Overall length 300 mm, brush section length 100 mm.
Application:
For manual cleaning and deburring of pipes, bores etc.

The black blade ‑ Lutz® multisharp, premium hardened blades with ultra-sharp ground edges.
Extra-fine and ultra-sharp ground blade.
Blade length: 100 mm
Blade width: 18 mm
Blade thickness: 0.5 mm
Number of snap-off points: 8
Number of blades: 10

1/4"

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on 3 faces; square end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form A
Length without tang: 250 mm

Directions
- Protection cream and skin care in high demand
- in case of contact with aqueous solutions, surfactants, alkaline solutions
- when handling plasters or substances insoluble in water, e.g. oils and lacquers.

Properties
- Oil-in-water emulsion
- pH neutral
- moisturizing
- quick to put on
- has a regulating effect on the water balance and elasticity of the skin
promotes regeneration
- Protects against water, fluids, dirt, chemicals or detergents

Multimatized handle with grip zone optimized for torque and comfort

Multi-material handle with optimized grip area in terms of torque and comfort. Chrome-vanadium steel blade, chrome-plated

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
With helical cut; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form F
Diameter: 9.2 mm
Length without tang: 250 mm

soft-PVC-adhesive tape
colour: transparent
e.g. for sealing damaged PVC-foil

Straight hexagonal shank with ball point.
Kraftform handle made of impact-resistant plastic with integral soft zones. Blade of high quality tool steel, surface matt chrome-plated, black tips.

Unscrewable steel handles. With 5 clamping screws for fixing the die. Up to ref. 65 × 25 in die-cast zinc, from item no. 75 × 20 in steel.
For closed and split dies according to EN 22568.
5 fixing screws for dies and die holders according to DIN EN 22568
For ⌀ die: 30mm
Height: 11mm
Total length: 260mm

Multi-component power handle with grip zone optimised for torque and comfort. Blade made of chrome vanadium steel, chrome-plated.
With Kraftform Micro multi-element precision screw grip and revolving centre cap.
Width across flats: 3 mm
overall length: 157 mm
Blade length: 60 mm

Multi-material handle with optimized grip area in terms of torque and comfort. Chrome-vanadium steel blade, chrome-plated

With hickory handle ergonomic shape, varnished.
Hammer head drop forged and ground to size. Carefully hardened and tempered. Head painted, face and peen bright finished.
With nylon handle protection sleeve. Size 200−1000 additionally with forged-on handle protection collar.

Stainless Steel

Multi-material handle with optimized grip area in terms of torque and comfort. Chrome-vanadium steel blade, chrome-plated

Multi-component power handle with grip zone optimised for torque and comfort. Blade made of chrome vanadium steel, chrome-plated.
With Kraftform Micro multi-element precision screw grip and revolving centre cap.
Width across flats: 3 mm
overall length: 157 mm
Blade length: 60 mm

Multimatized handle with grip zone optimized in terms of torque and comfort

Disposition of the blades around the axis of the tool

E14 / 40W / 300° C / 230V

also referenced under: OOMAOVENCR50B, CRM 33

Full grain leather gloves fit well for a better grip. Optimal support thanks to the elastic wrist strap.
Material: Full grain leather
EN 388: 2016
White colour

also referenced under: APROGLOVHD...

The grain, the binder, the abrasion-enhancing additives and the trimming disk reinforcement offer optimal abrasion performance and their service life depends on the different areas of use.
Disc to be deburred for steel and stainless steel with long service life and high abrasion capacity.
Maximum rotation speed: 80 m / s
⌀ bore: 22,23 mm
Max rotation speed: 6 600 min-1
Thickness of disc: 8 mm
⌀ disc: 230 mm

Clear view visor of polycarbonate.
Thickness 1.0 mm, flat flexible screen.

Mango de madera

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on 3 faces; square end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form A
Length without tang: 250 mm

Pure black Chinese bristle, 90 % tops. Metal ferrule, 9. gauge, unpainted wooden handle.

Of stainless spring steel strip.
Clean electrolytically applied black graduations and figures with a smooth surface. Easy to read. Rounded edges to prevent injuries.
Upper and lower edges both with 1 mm graduations.

Blade thickness: 0.4 mm
Blade length: 150 mm
TPI: 25

DIN 894, size 36mm