Designed for balance training - enhances balance sense, coordination, reaction, and motor skills.

Also used for muscle exercise.
Adjustable difficulty level based on inflation.
Diameter: 60 cm

The Freman Balance Board is a very practical tool for performing rehabilitation exercises. It allows you to work many muscles. The raised platform also helps to work on balance. Finally, the tray can be used to perform fitness exercises (weight loss, etc.)
Technical characteristics :
- Non-slip tray 40 cm in diameter.
-Height 5 or 8 cm
-Weight supported 100 Kg

The AIREX® Balance-pad is a perfect therapy and training tool made of the famously soft AIREX® foam material. The Balance-pad, with its smooth surface, is perfect for barefoot balance training beginners. This Balance-pad, owing to its thickness of 6 cm, has the desirable destabilizing characteristics. The yielding foam constantly challenges the body to maintain its balance and stabilize the joints. The exercises on this Balance-pad trigger the engagement of a greater number of deeper muscles than the exercises performed without the Balance-pad. The workout on the Balance-pad can purposefully improve both conditional and coordinative abilities, such as strength, endurance, differentiation and balance.

Intended purpose:
The AIREX® products are designed as a movement therapeutic aid for both institutional and domestic use. An object lying on the floor serves as a support for a person during medically indicated and prescribed exercises to improve motor skills and balance or postural control and / or for the therapeutic movement treatment of muscle weakness in the limbs and trunk as a result of a neurological or orthopedic disease.

Certifications: CE, MD, Sanitized, Swissmade
Characteristics: Hygienic, Long-lasting, Multifunctional, Water repellent

1/4"

also referenced under: OOMAVAPUCR10V, CRM 60

1335 x 13 x 0,65 mm, 6-10 teeth

- Perfect for cutting soft and hardwoods, plastics, plastics and non-ferrous metals.
- Tooth-tip Hardened Band Saw Blade with approx. 60-62 HRC
- The tooth shape, the arrangement of the teeth and the hardened tooth tips guarantee a perfect straight cut and a long service life
- The heat treated steel strip counteracts the bending of the band saw blade and thus reduces the risk of sheet tearing
- Saw bands German quality stainless steel with optimum price-performance ratio

150mm

Dimensions (LxWxH): 320 x 270 x 825 mm
Weight (net): approx. 14.5 kg

Very compact Li-ion fast charger with practical cable reel, for 14.4 to 18 V batteries. The 4.0 Ah battery is ready for use after 25 minutes

With integrated extraction system and pumice motor.
Heel front cone with bayonet lock, front cone Ø 90mm.
One sanding belt 40 mm, contact wheel Ø 175 mm,
belt length 1650 mm, one sanding belt 100 mm,
contact wheel Ø 100 mm, belt length 1480 mm,
suction wall diagonally recessed (orthopaedics version),
extraction capacity 1300 cubic meter /h.
Coarse and fine dust boxes removable from the front.

Dimensions WxDxH: 720 x 780 x 1550 mm
Power requirements: 400 V / 50 Hz / 2,1 kW

with cam switch and thermo-protected drive motors,
2 m power cord with CEE plug

- Orthopaedic sanding machine
- Enlarged work-space left, without trimmers
- Integrated extraction system with cotton filter
- Suction wall placed back widely
- Removable suction nozzles n Heel breaster on bajonet
- Sanding belts 1× 40×Ø175 + 1×100×Ø100 mm
- Separate belt control
- Suction flap activation controlled by each respective drive
- Sanding wheel on bajonet
- Pneumatic sanding belt tensioning
- Fully automatic filter cleaning
- Additional fine dust filter incl.
- Naumkeag multi-adjustable
- Operation by double push buttons
- Ergonomic HARDO Design
- Colour: light grey RAL 7035
- Electr. specifications: 400V/3Ph/50Hz/3,2kW
- Dimensions: 1150×780×1855 mm (w×d×h)
- Weight: 280 kg

Length approx: 1070 mm
Width/depth approx: 340 mm
Height approx: 950 mm
Weight approx: 72 kg
Supply voltage: 230 V
Mains frequency: 50 Hz
Extraction duct nominal width outside: 2 x 100 mm
Emissions sound pressure level at workstation Lp (idling without extraction unit): 87 dB(A)
Max. sanding width: 75 mm
Sanding belt length: 2000 mm
Sanding belt width: 75 mm
Circumferential belt speed(s): 29 m/s
Contact wheel diameter: 200 mm

Effective sanding height of 450 mm, pneumatic belt tension, light strip on sanding belt, integrated floor extraction, extraction on sanding belt, continuous speed control, incl. 649G60=2175X320 sanding belt
Electrical connection in V/Hz/kW 1x 230/ 50-60 / 2,2
Dimensions WxDxH 712 x 875 x 1.787 mm
Belt width 320 mm
Belt speed 6 - 16 m/s
Exhaust nozzle Ø 125 mm

for 701P250=* Belt sander
Length: 2,175 mm
Grit: 40
Width: 320 mm
Weight 0.82 kg
To be used for: Processing wood and plastics

Sander with two telescopic booms on rubber contact rollers.
Power supply: 400 Volt
Belt: 50 x 2500 mm
Weight: 140 kg
Headphones mandatory (according to DIN EN 352)

400W / 1.27kW

also referenced under: OOMAMARPDB01, CRM 91

Robust and stable universal grinding machines with abrasive belt and grinding wheel for a wide range of materials
Heavy, durable industrial design with maintenance-free motor
Housing made of extruded aluminum
Large, heavy mounting flanges and thus high disc concentricity
Sanding attachment with graphite coating; prevents friction and heat
Stop allows quick and easy sanding of workpieces
Tape adjustment without tools - only adjustable with a handle screw
Universal corundum grinding wheel and sanding belt in the standard scope of delivery

FEATURES
- Complete drive shaft with bayonet connection
- Abrasive ring diameter 100x90mm length 283mm
- Integrated vacuum cleaner and external fabric filter

MACHINE DIMENSIONS
- Width 540mm - Depth 410mm - Height 440mm - Weight 34 Kg

POWER SOURCE
- Single phase 230V - 1ph - 50Hz

allowing muscle rehabilitation of the lower and upper limbs
- the balance can be placed on the left or right side of the seat
- the balance is supplied with the load disks: 4 x 2 kg, 1 x 1 kg, 1 x 0.5 kg
- the load, range of motion and angle of departure are individually adjustable
- possibility of passive mobilization
- exercises in a sitting or lying position thanks to the reclining backrest from 0 ° to 90 ° by gas spring
- fixation at the level of the thighs to avoid compensations and at the level of the tibia on a heavily padded bobbin

Ceramic bonded combination oilstones, hardness O/ P. One side coarse for roughing, the other side fine for finishing.
Special Aluminium Oxide 100 grit (coarse) with long working life. Other side precision abrasive, 280/320 grit (fine), very free cutting, high surface quality.
Application:
For deburring, finish smoothing of irregularities, rounding of edges.

Ceramic bonded combination oilstones, hardness O/ P. One side coarse for roughing, the other side fine for finishing.
Special Aluminium Oxide 180 grit (medium) with long working life. Other side precision abrasive, 500 grit (very fine), very free cutting, high surface quality.
Application:
For deburring, finish smoothing of irregularities, rounding of edges.

Designed for Orthopedics workshops
Manual height adjustment, milling shaft horizontally and vertically
adjustable, continuous speed control, M.16 milling shaft thread, adapter from M.16

Dimension : Out Side W.50—D.50—H.40 cm
Power Supply 220 Volt 50 Hz
Power cord With CEE plug 3 × 16 A and CEE socket 3× 16 A
Sound intensity level 80 dB(A)
Electrical connection 220 V 50 Hz 1500 Watt
Motor RPM Variable rotation speed, min. 0 to max. 3000 RPM
Connecting cable 3x2,5 mm2 3 mt
Router shaft length and Type 500 mm 30 to 35 mm ( Conic 220 mm )
Suction head hose 100 mm plastic ,flexible
Scope of delivery Exhaust arm with suction hood (Ø 100 mm +hose )
Color Rall 7035 & 7045
Weight Net 42 Kg

MACHINE FEATURES
- Horizontal motor with bayonet connection
- T22 pine cone and pad supplied
- Foot switch operation
- Arrangement for connection to a centralized vacuum system
- 60 mm diameter on the side
- Suction channel adjacent to the pad

MACHINE DIMENSIONS
- Width 700mm - Depth 400mm - Height 400mm - Weight 50 Kg

POWER SUPPLY
- Single phase 230V - 1ph - 50Hz with inverter

Made entirely of forged steel − guaranteed unbreakable.
Opens forward. With forged pipe jaws underneath the normal jaws

For connecting screwdriver bits to drive attachments or screwdrivers with a 1/4, 3/8 or 1/2 inch square drive.
With quick-change coupling; for electric screwdrivers.
Square drive: 1/4 inch
overall length: 30 mm
Hexagon drive: C 6.3 (1/4 inch)

Description
Content:
Assorted bits blades C6.3 (1/4 inch); 1 coupling shank.
Content table use:
30 bits set 1/4 inch C6.3, length 25 mm: gs_profil_phillips 1 pc. each size 1; 2; 3
gs_profil_pozidriv 2 pcs. each size 1; 2; 3
gs_profil_schlitz 1 pc. each size 4; 5; 6.5
gs_profil_torx 2 pcs. each size TX10; TX20; TX40
gs_profil_torx 3 pcs. each size TX15; TX25; TX30
gs_profil_6kant 1 pc. each size 4; 5; 6
1 adapter: 1/4 inch gs_profil_4kant-einsatz – 1/4 inch gs_profil_6kant-einsatz
Adapter: 1 pc.

This new, modernly designed professional massage device M7 features a digital screen displaying the speed and time. The speed is adjustable from 15 to 60 cycles per second and remains constant regardless of the load.

The rolling base has a height adjustment from 86 to 117 cm and is equipped with a storage compartment for accessories.

The powerful motor allows for intensive use in physical therapy and sports medicine: general massage, treatment of spasmodic muscles, improvement of circulation, and respiratory therapy.

The M7 is a powerful and silent device. The rotating massage head is equipped with a sturdy handle.

Made of tough rubber (90 Shore), non-rebound; with powerful impact. Worn faces can be reworked by turning on a lathe. With ash wood handle.
Head length: 90 mm
Head ⌀: 54 mm
Weight: 300 g
Handle length: 320 mm

Ø360mm

Solid polishing pastes in homogeneous blocks, easy cleaning after use

also referenced under: OOMAMARP3000K, CRM 100

Oxygen saturation meter
Also suitable for travel thanks to the carrying strap
Automatic shutdown after 8 seconds
6 display screens and 10 brightness levels
Display of the measured value on a two-color OLE screen
Display of measured values ​​as bars or waves
Battery level indicator

Fully automatic upper arm electronic blood pressure meter with preformed cuff
The Intellisense Technology ensures that cuff inflates neither too tightly or too loosely. The dual check system ensures that the sensor performing the reading is checked by a second sensor to ensure greater accuracy.
- large digits offer easy read-out
- one button for all functions
- with bag

color: red - Ø 35 cm - length: 125 cm

the ideal exercise help for proprioception by children

composed of a hard foam-rubber core skin coated
soft, innocuous and integrated upholstery
urine resistant - easy to clean

color: blue - Ø 50 cm - length: 90 cm

the ideal exercise help for proprioception by children

composed of a hard foam-rubber core skin coated
soft, innocuous and integrated upholstery
urine resistant - easy to clean

dimension Ø 60 x 13 h cm
• non-slip rubber covering

Dimensions WxDxH: 850 x 500 x 1140mm
Weight: 83,000kg
Max. stitch length: 5mm
Sewing speed: max. 300 stitches
Needle system: 332 L LG, 332 LG
Footprint: 1000 x 750mm
max. presser foot stroke: 12mm