Flat cold chisel: 1 pc. each 125; 150 mm
Cross-cut cold chisel: 1 pc. 125 mm
Taper pin punch: 1 pc. each size 120×2; 150×3 mm
Centre punch: 1 pc. 120×4 mm

Content:
Urethane Bonding Component A
Urethane Bonding Component B
Chopart PU, Set Small Parts
V.A. Chopart Sohlen/Bonding Kit
Primer for Chopart Bonding

Corrugated wire securely crimped into the steel body. Dense packing, high concentricity and wear resistance

also referenced under: OOMAMARP3000G, CRM 96

2.2 kW

also referenced under: OOMAOVENCR50FR, CRM 37

Clear view visor of polycarbonate.
Thickness 1.0 mm, flat flexible screen.

On PE-coated fabric, universal repair tape suitable for rough surfaces, water-resistant, with strong adhesion.

Column diameter: 80 mm
Length approx: 715 mm
Width/depth approx: 360 mm
Height approx: 1640 mm
Weight approx: 85 kg
Drilling performance steel (S235JR): 25 mm
Continuous drilling performance steel (S235JR): 20 mm
Workspace length: 320 mm
Workspace width: 290 mm
T-groove type: diagonal
T-groove size: 14 mm
Rotation: 360 °
Angle: ± 45 °
Max. distance spindle - drilling table: 720 mm
Supply voltage: 400 V
Mains frequency: 50 Hz
Max. distance spindle - machine base: 1230 mm
Work area length: 385 mm
Work area width: 260 mm
Spindle motor drive output: 0.75 kW
Speed range: 200 - 2440 min¯¹
Number of gears: 12 Stages
Speed control: manually
Quill stroke: 85 mm
Spindle chuck: MT 3
Reach: 210 mm

Housing for drawers, shelves, etc. possible in steps of 20 mm. The base and upper cabinets are provided with corresponding perforations for screwing together, equipment with castors (height 1200 mm max.) Or wall mounting.
Doors with safety edges, reinforced and rigid, hinged or sliding door available, solid sheet model or with polycarbonate manhole. The cabinet without doors can also be used as open shelving.
Cylinder locks with 2 keys each integrated in the sliding handle. On request, possibility of delivery of locks for installations with security card at an additional cost.
Colors: As standard, body in light gray RAL 7035, doors and drawers in signal blue RAL 5005, powder-coated.
Cabinets fitted directly or subsequently with drawers must be anchored to the floor or to the wall to avoid any risk of tipping and may under no circumstances be subsequently fitted with casters.
In the case of specific equipment, make sure that the sum of the mounting heights does not exceed the useful height of the cabinet.
Shelves and accessories for combinable cabinets, see art codes. 957000 - 957100.
Installation of drawers in the upper part of the cabinet for base cabinets and in the lower part of the cabinet for upper cabinets.
Material thickness: 0.9mm
Permissible load of drawers / extendable shelves: 60 kg
Permissible shelf load / Maximum load per rack distributed over the surface (on the metal): 100 kg
Allowable load internal cabinet body: 1000 kg
Drawer extraction (partial / total): 100%
Door opening angle: 225 degree
Height adjustment in steps: 20 mm
Cylinder lock: Modular cylinder
Available colors: RAL 9002, 7035, 7005, 7016, 6011, 5018, 5012, 5011, 5005, 3003
Safety certificate: GS TÜV Süd
Height: 800 mm
Width: 500mm
Depth: 550 mm
Useful height: 640 mm
Weight: 30 kg

Sliding combination square, metric and imperial marking on ruler
Can mark 90° and 45°
Adjustable depth for repetition marking and scribing
Built in level bubble for approximate marking and a metal scriber contained in the end
Size: 300mm / 12"

Overall length: 180mm
Piano wire cutting values ​​up to ⌀: 2 mm
Standard: DIN ISO 5746
Material: Chrome vanadium steel
surface: chrome
spark-free: no
EAN/GTIN: 3662424087257
Manufacturer number: 187A.18CPE
Execution:
Chrome vanadium steel, chrome-plated head and joint, with heavy-walled covers on handles. Serrated jaws. Plastic opening spring that reduces fatigue. Induction hardened cuts (approx. 64 HRC), also suitable for piano wire.

Forged by stamping. With opening to tight tolerances

Drop forged. With close tolerance jaw width.
With oval shaft. Chrome vanadium steel, chrome-plated.

fire-retardant padding and covering
• rubber covered swivelling castors
• gas spring assisted adjustable height 67 Δ 91 h cm

Small model for 15mm and 25mm straps dim : 140m x 50 mm
Large model for 25mm and 38mm straps dim. 140m x 62mm
XXL Model for 38 mm and 49 mm straps dim: 140 x 74 mm

Large backlit LCD display (digit height: 21 mm). Stainless steel weighing pan.
Very easy to use with 2 keys.
Taring function (accumulation of weighings) for easy reset of the display.
Battery operated, automatic shutdown after 3 minutes.
Connection of an AC adapter possible.
Maximum weighing range: 50,000 g
Reading: 20 g
Board dimensions: 320 × 260
Width: 320mm
Depth: 300mm
Height: 60mm
Power supply: Battery operated
Number of batteries included: 2
Code art. batteries included: LR6
Net weight: 2.6 kg

plastic, 6-part,
5 / 10 / 15 / 20 / 25 / 30 mm thick,
size 320 x 150 mm

MACHINE FEATURES

Milling shaft for soles with adjustable fixed guide
Milling shaft for soles with bayonet coupling
Abrasive shaft with 2 independent belts 1650 x 40 mm
Dual-speed abrasive shaft for the three-phase model
Sandpaper advance in canvas
Low-speed waxing shaft with rotating brushes and pads, 3 colors
Adjustable polishing wheel motor
Internal wheels for easy movement
Automatic suction opening only at the used workstation. OPEN SYSTEM
Integrated LED light on abrasive belts
MACHINE DIMENSIONS

Width: 1350 mm - Depth: 770 mm - Height: 1700 mm - Weight: 450 Kg

Strong pressed steel shanks with rotating wheel and lock. With 6 different hollow punches (2.0; 2.5; 3.0; 3.5; 4.0 and 4.5 mm ⌀).
70% less force required due to efficient leverage. Ergonomically shaped plastic grips.
For soft materials such as leather use an underlay to avoid damage when a lot of pressure is applied.
overall length: 250 mm

also referenced under: EHDWSANDCG05, EHDWSANDCG15, CRM 481, CRM 482

Including; 10m aspirator flexible hose, 1x reduction, 20x clamp, 3x T-connector, 5x straight connector, 9x wall clamp, 3x butterfly valve, 1x silicone sealant cartridge, 1x silicone gun, 1x rubber tape

includes: ball valve, flexible hose connector, flexible hose (25m), flexible hose collar, pipe cross coupling, pipe plug, pipe double connector, teflon sealing tape

KM DILEM-10, relais TRP 614

also referenced under: OOMAOVENCR50N, CRM 31

with straight jaws

with round jaws

with straight jaws

with round jaws

with straight jaws

with round jaws

Bosch cordless drill / driver

Compact, powerful cordless drill with forward/reverse operation.
Long service life thanks to brushless EC motor (not 070243).
With Electronic Motor Protection (EMP) and Electronic Cell Protection (ECP).
LED light to illuminate the working area and battery charge display.
Multi-stage torque setting for precise screw driving.
Electronic speed control for precise drilling and screw driving.
Softgrip.

Outstanding available and comfortable handling due to compact design. Motor brake for precise work.
suitable battery - supplier / battery type / voltage: Bosch 18 V
Manufacturer's designation: GSR 18V-21
Motor design: 4-pole DC motor
Battery capacity: 2 A·h
Battery voltage: 18 V
maximum torque soft: 21 N·m
maximum torque hard: 55 N·m
Speed range 1st speed: 0 min-1 - 480 min-1
Speed range 2nd speed: 0 min-1 - 1,800 min-1
Quick-clamping chuck range: 1.5 mm - 13 mm
maximum twist drill size ⌀ in steel: 13 mm
maximum twist drill size ⌀ in wood: 35 mm
Weight: 1.7 kg
maximum vibration to EN: <2.5 m/s2

for corner construction with two flights - for short or long flights - type Standard or Plus

The AIREX® Corona has been our most popular exercise mat for years and delivers outstanding features. It fulfills all the key points that health professionals expect from a perfect exercise mat - the reason why the Corona has become the No. #1 in physiotherapy and personal training. It offers enough space for all kinds of exercises and is so comfortable that it motivates the user to go to new heights. The wearing comfort, the skin feel and the hygienic properties are first class.

Intended purpose:
The AIREX® products are designed as a movement therapeutic aid for both institutional and domestic use. An object lying on the floor serves as a support for a person during medically indicated and prescribed exercises to improve motor skills and balance or postural control and / or for the therapeutic movement treatment of muscle weakness in the limbs and trunk as a result of a neurological or orthopedic disease.

Certifications: AGR, CE, MD, Sanitized, Swissmade
Characteristics: Comfortable, Dampening, Hygienic, Long-lasting, Water repellent

soft-PVC-adhesive tape
colour: transparent
e.g. for sealing damaged PVC-foil

All cutters have 3 teeth, radial relief.
The flutes are rectified in the mass.
Bevelling cutters in economical execution.
Use:
Precision chamfering cutters for making bevels without facets.

All cutters have 3 teeth, radial relief.
The flutes are rectified in the mass.
Bevelling cutters in economical execution.
Use:
Precision chamfering cutters for making bevels without facets.

All cutters have 3 teeth, radial relief.
The flutes are rectified in the mass.
Bevelling cutters in economical execution.
Use:
Precision chamfering cutters for making bevels without facets.

Countersink sets, in a case
Practical set for assembly and workshop use.
Content table use:
1× each countersink: Size 4,3; 5; 6; 6,3; 7; 8; 8,3; 10; 10,4; 11,5, 12,4; 15; 16,5; 19; 20,5; 23; 25
Number of countersinks: 17
Countersink tip angle: 90 degrees
Tool material: HSS
Number of cutting edges Z: 3

Countersink sets, in a case.
Practical set for assembly and workshop use.
Content table use:
1× each countersink: Size 6; 8; 10; 11.5; 15; 19
Number of countersinks: 6
Countersink tip angle: 90 degrees
Tool material: HSS
Number of cutting edges Z: 3

Stainless Steel