Can be shaped easily.
Can be worked with hot water or with a heat gun.
Perfectly matches the patient's shapes.
Good weldability.
Lightweight and resistant.
Can be used on a model or directly on the patient who has been previously protected with Jersey.
> For finger and wrist splints

Can be shaped easily.
Can be worked with hot water or with a heat gun.
Perfectly matches the patient's shapes.
Good weldability.
Lightweight and resistant.
Can be used on a model or directly on the patient who has been previously protected with Jersey.
> For finger and wrist splints

Can be shaped easily.
Can be worked with hot water or with a heat gun.
Perfectly matches the patient's shapes.
Good weldability.
Lightweight and resistant.
Can be used on a model or directly on the patient who has been previously protected with Jersey.
> For finger and wrist splints

Can be shaped easily.
Can be worked with hot water or with a heat gun.
Perfectly matches the patient's shapes.
Good weldability.
Lightweight and resistant.
Can be used on a model or directly on the patient who has been previously protected with Jersey.
> For finger and wrist splints

Lightweight and durable magnesium metal body with needle bearing and thumbwheel guide rollers. Hand deburrer retractable in the body. With spare rollers.
Advantages):
Automatic hold and tightening on the tube thanks to the quick one-hand QuickLock adjustment.
Quick and precise positioning of the wheel according to different tube diameters.
Use:
Universal for cutting thin-walled stainless steel, copper and aluminum tubes (up to 2 mm thick).
Technical data
For ⌀ ext. pipe: 6mm - 35mm

All faces and edges ground. Inspection test faces ground.
Application: For accurate general workshop work.
Accuracy: DIN 875 / 2 − angle tolerance e.g. for size 100×70 = 0.030 mm.
Standard: DIN 875
Stock length: 600×300mm
Right angle tolerance: 0.08 mm
Shank cross-section: 40×8 mm

Max. Length tripod = 900mm
Min. Length tripod = 200mm

For working on your condition you no longer have to leave your house. With the Tunturi Performance T50 treadmill, you can easily perform your exercises indoors, at your own pace and at your own level.
Comfort
The Tunturi Performance T50 is a spacious and ergonomically designed treadmill. The spacious treadmill offers maximum comfort while walking or running. The powerful and reliable motor ensures that a workout can be performed at any desired level.
Damping running surface
The tread is extra wide, making it even easier to walk. In addition, the treadmill has T-Flex Comfort Plus technology. This technology provides extra dampening, which makes you feel like you're walking outside on a soft surface. This makes walking even more comfortable and enjoyable. The treadmill’s running surface is 140 x 50 cm.
Run wherever you want
Want to go around Paris on a random day? Or walk across Central Park in New York? Everything is possible with “Tunturi Routes”. You decide where you want to walk and this is then displayed on the screen. Even the inclination of the location you’re walking in will be automatically simulated by the treadmill. So it seems like you are actually walking in that location!
The AnyRun and Kinomap applications are also supported.
Extra security
The system ensures that the treadmill can be unfolded safely and slowly. Furthermore, to optimize safety, the treadmill is equipped with both a safety bar and a hand support at the front.
Display
It’s easy to track your own performance. You can set the device to your wishes via the large control buttons. The monitor shows the data you are producing during the program and also features a 400m track.
Features
- monitor: 4 LED + 400m Track
- programs: 44
- languages: Engels
- motor: 4,5 HP DC
- speed: 1,0 - 20 km/h
- elevation: 0 - 15%
- running surface: 50 x 140 cm
- running deck type: 18 mm
- foldable: yes, Soft Drop System
- shock absorbing: T-Flex Comfort Plus
- max user weight: 135 kg
- power supply: 230V - 50/60Hz
- dimensions: L177 x W 83 x H 143 cm
- dimensions folded: L 102 x W 83 x H 155 cm
- weight: 87 kg
- running belt: 1,6 mm Sand
- handgrip control: speed/elevation
- contact heart rate
- telemetric HR receiver
- chest belt 5 kHz: option
- transport wheels
- Bluetooth connection
- USB charger 5V DC - 2,1A
- apps (Android & iOS): Tunturi Routes, AnyRun and Kinomap
- tablet support
- step counter

This treadmill has been designed using Tunturi’s years of experience in the field. The treadmill’s running track features excellent shock absorption, thus helps to prevent aching joints. Its strong motor ensures sturdy and stable running even at low speeds.

The Platinum Pro Experience
large running track equipped with good shock absorption
strong and silent 3HP AC motor with a maximum speed of 20 km/h
splendid robust design frame concept
straightforward and user-friendly console with TFT-LCD display
waxed belt and the reversible deck ensure very good durability and low maintenance
safe training thanks to the pulse-driven programs and the safety key

Technical Features
7" color TFT-LCD
26 programs: 1 manual, 10 preset, 10 users, 1 target HRC, 1 test, 3 T-Road
11 selectable languages
USB charger 5V DC 1A
shock absorbing: T-Flex
bottle holder
contact heart rate and telemetric HR receiver built-in
motor: 3,0 HP AC
power supply: 230V
speed: 0,8 - 20 km/h
elevation: 0 - 15%
running surface: 153 x 56 cm
running belt: Comfort 2,2 mm
running deck type: 25 mm
maximum user weight: 165 kg
dimensions: 213 x 144 x 89 cm
weight: 172 kg
transport wheels
Reha handlebar: option
option: heart rate chest belt
tablet support
apps: Kinemaps (not controlled)

Dimensions: 40x50x30cm
Bultex foam 36 kg / m²
Faux leather covering
Interior: Bultex foam

1000x1600mm

270mm

upholstered
suitable for gymnasiums
two handgrips for hanging
one side covered with slip proof material - smooth on the other side
dimensions: 200 x 100 x 4 cm

For cervical traction - includes:
- neck harness
- transverse suspension bar
- set of washable pads

Incorporating both an adjustable angle backrest and an adjustable head/foot section with breathing hole and plug, these tables are specifically designed for lumbar and cervical traction and feature an integral rolling top design to facilitate effective traction procedures. Supplied with machine mount.
- safe working load and lifting capacity (from minimum height) of 240 kg
- integral rolling top design to provide more effective application of traction forces
- adjustable height mount for traction machine with offset positioning for changing angle of traction application
- adjustable angle backrest from horizontal to +80°
- adjustable angle head/foot section from -25° to +75° with breathing hole and plug
- the power assisted backrest and foot sections incorporate anti-trap design gas struts
- electric height elevation from 48 to 99 cm by means of a foot switch
- retractable wheel design and adjustable foot for stability on uneven surfaces
- fixation point for optional cervical traction accessory
- oilite bearings on all pivot points
- hand switch fitted as standard on electric models
- standard width 70 cm
- choice of upholstery color

The Alfatrac HT is a complete microprocessor controlled traction unit for lumbar and cervical traction. The unit can work in continuous and intermittent mode. The operator can use a large number of preset treatments and has at his disposal a memory capacity up to 50 different personalized codes.
Choice between the following modes: static, progressive, regressive, cyclic, combined.
A patient emergency stop with remote control allows the patient to stop the session. A large LCD display shows the functions. An acoustic signal indicates the end of traction. Without accessories.

Technical Features:
- OS: Windows CE
- mains: 110-230V - 50/60 Hz
- consumed power: 80 VA
- maximum measurement range: cervical treatment 25 kg, lumbar treatment 90 kg
- treatment time: 1 - 60 min
- dimensions: 41 x 42 x 18 cm
- weight: 12 kg

Contains:

Chest Strap
Set of Counter-Traction Straps
Pelvic Strap
Chin Strap
Spreader Bar
Round Pillow
Leg Rest Height Adjustable by Cylinder

The tapered Torx® HF profile reliably retains all Torx® screws. L-shank; through hardened (hard and tough).
Ideal for starting and tightening Torx® screws where access is difficult.
Material: Chrome vanadium steel, manganese phosphated.
Supplied with table use:
1 each L-wrench in a plastic clip: TX8; TX9; TX10; TX15; TX20; TX25; TX27; TX30; TX40

Clés dynamométriques à un bras sans vernier de réglage. Réglables par un appareil de contrôle de clé dynamométrique

Kraftform handle for easy transmission of the required torque. With Rapidaptor quick-change holder for 1/4 inch bits with C6.3 and E6.3 shank. Sizes 600 and 880 with pistol grip for transmission of higher torques.
The torque can be set using a torque analyser (No. 654300 − 654460) and a 7AF hexagon screwdriver (10AF for size 600) . The torque screwdrivers are factory-set to the most frequently used torque setting.
When the set torque is reached the screwdriver triggers, with clearly audible and perceptible signals. The triggering torque is unrestricted.
maximum torque: 120 cN·m
set torque: 0.3 N·m
Bit socket: D6.3 ; F6.3
Torque range:0.3 N·m - 1.2 N·m
Connection format: bitholder 1/4 tomme
Overall length L: 155 mm
Adjustable trigger value: pre-set

139 tools

also referenced under: OOMAOVENCR50K, CRM 40

120 minutes

also referenced under: OOMAOVENCR50I, CRM 29

This vise tilts 90 degrees and is solidly constructed. Thanks to its excellent clamping force, the vice does not move when drilling or milling.
Made of cast iron, the vise is strong and sturdy. This vise has an adjustable tilt angle between 0 and 90 degrees, and a locking pin on the chain to secure it every 15 degrees.
This unit also features a stable base, which can be easily mounted on your workbench. It is compact and lightweight, making it suitable for mobile use.

Specifications
Material: cast iron
Jaw width: 105mm
Jaw opening: 110 mm
Jaw depth: 47mm
Base size: 190 x 185 mm (L x W)
Tilt adjustment: 0 - 90 degrees
Height: 120mm (lying), 220mm (standing)

STANDARD AND ECONOMY VERTICALIZATION TABLES CHARACTERISTICS:
lifting force of 225 kg, therefore suitable for heavy patients
height and righting by electric motor with manual control
large wheels and centrally controlled brakes on the Standard model, wheels with individual brakes on the Economy model
the double foot support can be individually tilted from + 15 ° to -30 °
supplied with retractable handles and set of fixing straps depending on the model
Adjustable work table on the Standard model (option for Economy model)
goniometer for reading the inclination
90 ° full standing position
minimum height 47 cm and maximum 101 cm
base accessible to patient lifts
self-lubricating moving parts ensure quiet operation
standard width: 70 cm
cover available in various colors

• Fixed height 49 cm to allow for easy transfer of wheelchair patients
• The design of the support frame allows smooth lifting and transfer of the patient
• Electric motor with a thrust force of 6000 N for positive tilt option
• Positive tilt up to + 88˚
• Folding and adjustable footboard + - 15˚
• Equipped with set of 3 fixation belts
• Two fixed and two swivelling castors all with blocking mechanism
• Manual control switch
• Fire-retardant padding and covering class 1IM
• Patient transfer access 14 cm
• Max. load for the entire table: 120 kg
• Dimensions: 200 x 65 x 49h cm

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on all faces; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form C
Length without tang: 250 mm
Width: 18 mm

also referenced under: OOMAMARP3000F, CRM 95

These sealants replace hemp, sealing tapes, and pastes, they are resistant to gases, liquids, air, water, oils, hydrocarbons and many chemical products. Complete surface contact ensures a 100% seal. Unscrewing, or correction of position during assembly can be performed using conventional tools at any time before the sealant hardens. No sealant residues to block filters and valves.
The stick with pasty sealant is economical in consumption, no drips after use.
Application:
Improved bonding of suckers.
Note:
Before applying sealant, clean the threads with general-purpose cleaner
Labelling of hazardous substances: GHS07 Caution
Content of stick: 19 g
Colour of sealant: orange
minimum break-away torque: 5.8 N·m
Temperature range: -55 °C - 150 °C
for thread size M to: M80
for imperial thread size: 3 inch
Strength for disassembly: low
fluorescent:no

also referred as: OOMAOPRECR75T, CRM 76

FUNCTION: Programmer, Controller
DIMENSIONS: 48 x 48 mm
DISPLAY: 1 display with 4 digit
POWER SUPPLY: 24 Vac/Vdc, 100… 240 Vac
INPUTS: 0/1… 5 V, 0/2… 10 V, 0/4… 20 mA, Pt100, PTC-NTC, Thermocouple
OUTPUTS: Relay and/or SSR control
DIGITAL INPUTS: 1, 2
INDEPENDENT TIMER: Yes
NUMBER OF PROGRAMS / SEGMENTS: 1 program with 8 segments
INTERFACE: TTL Modbus
SPECIAL FUNCTIONS: Digital retransmission, Hours/Days worked, Power on delay, Soft start, Transmitter power supply, User calibration, Wattmeter
CONTROL: ON/OFF and PID single or double action
EXTRACTABILITY: By the front
CERTIFICATIONS: CE, UL

Specially parameterized for CR5000G

also referenced under: OOMAOVENCR50RG, CRM 46, K48

also referenced under: OOMAOVENTHERDIG, CRM 53

also referenced under: OOMAOVENTERMO, CRM 47

50 cm

Its texture allows it to breathe and to drain perspiration.
Very comfortable and soft to the touch
Easy to clean, washable at 40°C / 100°F.
Good ageing
Glue-less, this fabric complies with sustainable development policies and limits risks of allergy
Thermoformable at 170°C / 340°F.

Its texture allows it to breathe and to drain perspiration.
Very comfortable and soft to the touch
Easy to clean, washable at 40°C / 100°F.
Good ageing
Glue-less, this fabric complies with sustainable development policies and limits risks of allergy
Thermoformable at 170°C / 340°F.

400x400x15mm
Suitable for fabricating flexible inner prosthetic sockets,
especially in lower limb prosthetics
Product information:
• Ethylene vinyl acetate
• Also in antibacterial (616T253)
• High flexibility
• High surface quality
• Can be subsequently thermoformed
• Minor shrinkage: approx. 3%
• Comfortable to wear
• Washable
• Temperature recommendation: 160 °C/320 °F
(convection oven, infrared oven)

ENP 220, spare part

also referenced under: OOMAOVENCR50FT, CRM 28