The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on all faces; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form D
Length without tang: 250 mm
Width: 10 mm

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on all faces; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form D
Length without tang: 250 mm
Width: 10 mm

All faces and edges ground. Inspection test faces ground.
Application:
For accurate general workshop work.
Accuracy:
DIN 875 / 2 − angle tolerance e.g. for size 100×70 = 0.030mm.

Stainless Steel

Stainless Steel

Sturdy design with long arms, made of tool steel. Points and measuring faces ground and hardened. Solid spindle with adjusting nut for quick and fine adjustment. Annular spring provides constant spring tension.
With replaceable tips.

Sturdy design with long arms, made of tool steel. Points and measuring faces ground and hardened. Solid spindle with adjusting nut for quick and fine adjustment. Annular spring provides constant spring tension.
With replaceable tips.

260mm

Technical characteristics:
Type: SP11
Max. working pressure: 24 bar
Maximum operating temperature: 50°C
Air flow: 25 l/min
Flow at 5 bar: 25 l/min

Execution:
Spray gun with straight tube and plastic container, matt red, capacity 1 l.

Features and applications:
- GN 227.7 stamped steel handwheels have high mechanical strength and coating for increased corrosion resistance.
- They are also shock and impact resistant.
- The tapered square hole facilitates installation and proper positioning on a pin.
- Molded shape prevents injury from sharp edges when handling.
- Handwheels are stamped “SHUT” and “OPEN” for safe and correct valve handling.

Handy small spirit level. Die-cast aluminium profile. Face-milled measuring faces. Unbreakable acrylic vials (vertical + horizontal).
Additionally 360° rotating vial. Vee groove and magnet in the measuring face.

for torsion and pro-supination of the hand and the arm
dimensions: 40 x 20 x h 30 cm

also referenced under: OOMAMARP3000E, CRM 94

long. total 5m - long. work 4m
With rotating unions with bearing
at both ends, external thread. G 1/4 "
With metal crease protection

Soft ergonomic plastic handles. Special stainless steel blades (52 - 54 HRC).
Paper, cardboard, fabric, leather, rubber, rope, etc.
Total length: 250 mm

Ergonomic soft-grip handles of plastic. Blades of non-rusting stainless steel (52 - 54 HRC).
Paper, cardboard, fabric, leather, rubber, rope, etc.
Total length: 225 mm

Ergonomic soft-grip handles of plastic. Blades of non-rusting stainless steel (52 - 54 HRC).
Paper, cardboard, fabric, leather, rubber, cord, and much more.
overall length: 200 mm

Elastic paddle in stainless steel strip, flat ovoid wooden handle.

Replacement wheel with needle bearing and quick-change axle.
Technical data
⌀ wheel 20 mm
Wheel width 6.2 mm
Roll bore 7.8 mm

Suitable for:
Wire cable cutter

230V / 1550W

also referenced under: OOMAOWELPR01, CRM 2, 142.717

Wire cross section: 16 mm²
Coupling plug wire cross section: 25 mm²
Coupling plug arbor: 9 mm
Earth clamp: 200 A
Length cable approx: 4 m

also referenced under: EMACWELDWMCG, CRM 21

260 A- 35% ED / electrodes max. 3.2 mm
Insulated according to EN 60974-11 with break-proof insulating shells made of glass-braided material for Allen cable lug connection

also referenced under: EMACWELDWMEH, CRM 22

for hardwood, softwood, vinyl, nylon, plaster, chalk, chipboard, linoleum, rubber, thermalite, fiberglass

Material of blade: HSS
Number of blades: 1
Blade length: 75 mm
Blade width: 3.2 mm

NIMH1434 14.4V

DIN 894, size 36mm

IP20: Protection against ingress of foreign bodies of ⌀ < 12 mm, but all contact must be avoided, and no protection against water.

Sturdy metal central piece with handle of hickory, with nylon handle protection sleeve and ring wedge. The nylon inserts are impact resistant and wear-resistant, and are attached to the central piece by a double action system.
Central piece of steel.

Sturdy metal central piece with handle of hickory, with nylon handle protection sleeve and ring wedge. The nylon inserts are impact resistant and wear-resistant, and are attached to the central piece by a double action system.
Central piece of steel.

2.5x1740x960mm

Acrylic resin is very fluid, allowing, in combination with COPACRYL Jersey or COPACRYL Carbon resins, to add flexibility to composite parts.

The Soft resin cannot be used alone and must be incorporated into the Jersey or Carbon resin at a ratio of 10 to 30% to add flexibility to the fabricated device.

The polymerization of this resin occurs at room temperature by adding our SIPACRYL powder hardener, at a maximum ratio of 2% to 3% by weight compared to the amount of resin.

Combining COPACRYL Soft resin with Jersey or Carbon resins yields composite parts with the following characteristics:

Excellent mechanical properties
Very good skin tolerance
Ability to be thermoformed after curing (within the elasticity limits of the reinforcement fabrics used)
Can also be used with our natural reinforcements ORTHOFLAX®, ECO-BLACK, and HYBRIDS.

foam polyester elastic exercise ball
Ø 65 mm

with centring jigs for conical and cylindrical cups
OOMAALIGGJ

Presentation in: Steel case
Length: 445 mm
Width: 187mm
Height: 51 mm
Number of rooms: 23
Hex key openings range: 10-34 mm
Drive profile: Hex socket wrench
Drive square: 1/2 inch

220V, 2.5kW
2800 tr/min
110x60x150cm, 140kg

- Horizontal motor with 75x200mm abrasive pad
- M16 thread and T22 abrasive pinecone at the top of the shaft
- Foot switch operation
- Predisposition for connection to a centralized suction system
- diameter 150mm on the side
- Suction mouth behind the adjustable pad

380V, 2200W, 3000rpm
with dust collector

380V, 1.25kW / 1.7kW
with dust collector