Stainless Steel

Total length: 205mm
For conductor cross section: 0.5 mm² - 6 mm²

Execution:
Steel body with reduction system. Exact achievement of the defined crimping forces thanks to the integrated automatic clamping.
Economic model. Lateral introduction of the tips.

Body drop forged. Jaws chemically blackened, head bright polished. Notched jaws for crimping terminals to DIN 46228.
Plastic coated handles.

Width of the jaws: 150mm
Opening of the vice: 130 mm
Height of the jaws: 40 mm
Between axis: 160 mm
Overall dimensions WxDxH: 450x450x160 mm
X axis, longitudinal stroke: 200 mm
Y axis, transverse stroke: 200 mm

Fully hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering. Special quality, i.e. highest possible tip hardness (approx. 59 HRC) with exceptional toughness.
Chrome vanadium special alloy. Surface chrome-plated.

Fully hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering. Special quality, i.e. highest possible tip hardness (approx. 59 HRC) with exceptional toughness.
Chrome vanadium special alloy. Surface chrome-plated.

for children's elbow L = 27cm

also referenced under: OOMAMOULEC27, CRM 82

for elbow child L = 17cm

also referenced under: OOMAMOULEC17, CRM 80

for elbow adult L = 23 cm

also referenced under: OOMAMOULEC23, CRM 81

⌀275, ⌀40, 2.5mm
140 teeth

Universal cutting disc for steel and INOX, good cutting quality and resistant.
For freehand cutting on electric and pneumatic angle grinders with a maximum cutting speed vc of 80 m / s.
Maximum rotation speed: 80 m / s
⌀ bore: 22,23 mm
⌀ disc: 230 mm
Disc thickness: 2.5 mm
Max rotation speed: 6 600 min-1

for metal, D115mm

∅10/85mm, 0.5mm thick, per 5 pieces
To cut:
Steel sheets up to 1mm, plastics, wood, putty, non-ferrous metals

Internal brushes with galvanised twisted wire core and plain helix of bristles.
Helical brush section of waved steel wire.
Overall length 300 mm, brush section length 100 mm.
Application:
For manual cleaning and deburring of pipes, bores etc.

also referenced as: OOMAOPRECR75C, CRM 73

also referenced under: OOMAMARP3000D, CRM 93

100pc

2-part plastic handle with spring-loaded lock for locking / unlocking blades / telescopic shank. Blades can be stored in the removable end cap.

4 vacuum forming workstations with connection to a vacuum system, e.g. 755E80=* Mobile vacuum pump with tank, tank integrated in the frame, water trap, 1x shelf with grate, 1x replaceable HPME shelf for cutting and gluing, vacuum pipe holder tilts 90°, foot pedals to control the vacuum, vacuum pipes, recommended vacuum forming output 10m³ per workstation
2500x750x750mm

The new E-Shock HT is an innovative device for performing extra-corporeal shock-waves therapy.

The electropneumatic system requires almost no maintenance. Usually, a simple regeneration of the applicator and a general check of the instrument itself is necessary.

The "Large-Focus" shock-wave applicator is capable to generate and transmit mid and high energy shock-waves into the different cellular layers, respecting the patient’s comfort.

All the functions are visualized on a large color LCD. In addition to the usual and traditional keys and buttons, it is possible to adjust every parameter on the touchscreen.

The versatile Windows CE operating system ensures possible upgrading.

A wide range of preset protocols with body maps is available. After a pathology is chosen, the screen will show the body parts to be treated and the unit will suggest the parameter values to set.

Free memories for entering customized protocols.

Technical Features
max. pressure: 5 bar
frequency: 1 to 15 Hz
emission mode: Large Focus
max. penetration of focus: ± 55 mm
max. penetration of shock-wave: ± 70 mm
wheeled frame
color touchscreen 400x800 pixels
power supply: 115-230 V~ 50/60 Hz
consumed power: 1000 VA
dimensions: 40 x 30 x 90 cm
safety class: class I type BF according to IEC 601-1
Directive EEC 93/42: IIb

Closed, pre-stretched line. ≥ M3 with GUN entry on both sides for easy threading and clean chip evacuation in the cutting direction. Entry on 2 nets. Ground and nitrided, rake angle approx. 15 °.
Thread size: M10
Thread Type: M
Side angle: 60 °
Tool type: HSS E
Tolerance class: DIN 13 6g
Cutting direction: straight
Pitch: 1.5mm
⌀ outer: 30mm
Height: 11mm

Closed, pre-stretched line. ≥ M3 with GUN entry on both sides for easy threading and clean chip evacuation in the cutting direction. Entry on 2 nets. Ground and nitrided, rake angle approx. 15 °.
Thread size: M12
Thread Type: M
Side angle: 60 °
Tool type: HSS E
Tolerance class: DIN 13 6g
Cutting direction: straight
Pitch: 1.5mm
⌀ outer: 30mm
Height: 11mm

Closed, pre-stretched line. ≥ M3 with GUN entry on both sides for easy threading and clean chip evacuation in the cutting direction. Entry on 2 nets. Ground and nitrided, rake angle approx. 15 °.
Thread size: M3
Thread Type: M
Side angle: 60 °
Tool type: HSS E
Tolerance class: DIN 13 6g
Cutting direction: straight
Pitch: 1.5mm
⌀ outer: 30mm
Height: 11mm

Closed, pre-stretched line. ≥ M3 with GUN entry on both sides for easy threading and clean chip evacuation in the cutting direction. Entry on 2 nets. Ground and nitrided, rake angle approx. 15 °.
Thread Size: M4
Thread Type: M
Side angle: 60 °
Tool type: HSS E
Tolerance class: DIN 13 6g
Cutting direction: straight
Pitch: 0.7mm
⌀ outer: 20mm
Height: 5mm

Closed, pre-stretched line. ≥ M3 with GUN entry on both sides for easy threading and clean chip evacuation in the cutting direction. Entry on 2 nets. Ground and nitrided, rake angle approx. 15 °.
Thread size: M5
Thread Type: M
Side angle: 60 °
Tool type: HSS E
Tolerance class: DIN 13 6g
Cutting direction: straight
Pitch: 0.8mm
⌀ outer: 20mm
Height: 7mm

Closed, pre-stretched line. ≥ M3 with GUN entry on both sides for easy threading and clean chip evacuation in the cutting direction. Entry on 2 nets. Ground and nitrided, rake angle approx. 15 °.
Thread size: M6
Thread Type: M
Side angle: 60 °
Tool type: HSS E
Tolerance class: DIN 13 6g
Cutting direction: straight
Pitch: 1mm
⌀ outer: 20mm
Height: 7mm

Closed, pre-stretched line. ≥ M3 with GUN entry on both sides for easy threading and clean chip evacuation in the cutting direction. Entry on 2 nets. Ground and nitrided, rake angle approx. 15 °.
Thread size: M8
Thread Type: M
Side angle: 60 °
Tool type: HSS E
Tolerance class: DIN 13 6g
Cutting direction: straight
Pitch: 1.25mm
⌀ outer: 25mm
Height: 9mm

Two-jaw ratchet tool holder for clamping drive squares. Sliding handle with groove at each end for locking the stop ball. Chromed carrier block. Reversible left / right or fixed ratchet. All-steel model for high dynamometric load. Tool holders with exact concentricity and tight tolerances. Milled and induction hardened clamping jaws for high toughness and optimum surface hardness.
Suitable for tapping in difficult places.
For other sizes of taps and reamers, see the tables for the corresponding product groups.
Material: All steel
□ capacity: 2.6 mm - 5.5 mm
For hand taps DIN 352: M3 - M10
Total length: 85 mm

Unscrewable steel handles. With 5 clamping screws for fixing the die. Up to ref. 65 × 25 in die-cast zinc, from item no. 75 × 20 in steel.
For ⌀ die: 20mm
Height: 5mm
Total length: 175mm

Unscrewable steel handles. With 5 clamping screws for fixing the die. Up to ref. 65 × 25 in die-cast zinc, from item no. 75 × 20 in steel.
For ⌀ die: 25mm
Height: 9mm
Standard: EN 22568
Total length: 210mm

Unscrewable steel handles. With 5 clamping screws for fixing the die. Up to ref. 65 × 25 in die-cast zinc, from item no. 75 × 20 in steel.
For closed and split dies according to EN 22568.
5 fixing screws for dies and die holders according to DIN EN 22568
For ⌀ die: 30mm
Height: 11mm
Total length: 260mm

Large high-contrast digital display. The measuring faces are precision-lapped.
Digital caliper with absolute scale, no zeroing required. Electronics switch off automatically after approx. 5 minutes. Simply move it to switch on.
Glass scale ensures very high accuracy.
The electronics are decoupled from the casing and incorporated directly in the sliding part. The gauging force is transmitted directly to the measurement jaws. This reduces the liability of the caliper to errors and increases the working life.
With sturdy metal casing.

Borematic quick blind hole micrometer for 3-point internal measurement. Large LCD display with 11 mm character height for clear and error-free reading. Display can be rotated 330°. The measuring probes centre the micrometer automatically in the bore and ensure easy handling. The measuring probes are adjusted without any error by a carbide cone.
Anvils of titanium-coated hardened steel.
Advantage:
Very quick measurement with high repetition accuracy due to pistol grip and constant measuring force.
Function:
Data storage button saves the measurement result (for instance in inaccessible measurement positions).
Zero point / absolute size enables zeroing at any position.
Good / Reject display for easy checking against tolerance values.
Quick adjustment for quick spanning of the distance to be measured.

Protection against bacteriological risks according to EN 374