ENP 220, spare part

also referenced under: OOMAOVENCR50FT, CRM 28

ENP 360°, spare part

also referenced under: OOMAOVENCR50O, CRM 43

fixedly mounted on a trapezoidal steel plate,
for mounting on a workbench or the like,
multi-stage height adjustment of the milling axis,
powerful motor with 2 turning speeds,
electromagnetic motor brake,
removable axle guard
400V / 50Hz / 2,7-3,4 kW

D100, L260mm

Space requirements WxD: 1400 x 800 mm
Power requirements: 400 V / 50 Hz / 1,27 kW / 1,7 kW
Noise level: 75 dB(A)
Power cord length: 2 m
Weight: 134,000 kg
Calour: lichtgrau (RAL 7035)
Scope of delivery: with 1 Sanding belt (2500 x 50 mm), 1 round grinding plate, 2 m power cord with CEE plug
Sanding belt speed: 15/30 m/sec
Dimension upper part W x D x H: 1000 x 500 x 1622 mm
Description: left side: aluminium plane wheel 350 mm Ø, continuous, inclinable support table, folding down at the side for full use of the grinding surface, extraction connection piece 100 mm Ø to connect to a chip extraction system with a minimum air velocity of 20 m/s right side: belt tensioning arm with closed protection hood, extraction connection piece 100 mm Ø, belt length 2500 mm, belt width 50 mm with round plate, contact wheel, sanding belt

3 positions

also referenced under: OOMAOVENCR50S, CRM 30

2 positions

also referenced under: OOMAOVENCR55003, CRM 30.1

D100mm

also referenced under: OOMADUSTAS04, CRM 107.2

Stainless Steel

Stainless Steel

Technical characteristics:
Type: SP11
Max. working pressure: 24 bar
Maximum operating temperature: 50°C
Air flow: 25 l/min
Flow at 5 bar: 25 l/min

Execution:
Spray gun with straight tube and plastic container, matt red, capacity 1 l.

Features and applications:
- GN 227.7 stamped steel handwheels have high mechanical strength and coating for increased corrosion resistance.
- They are also shock and impact resistant.
- The tapered square hole facilitates installation and proper positioning on a pin.
- Molded shape prevents injury from sharp edges when handling.
- Handwheels are stamped “SHUT” and “OPEN” for safe and correct valve handling.

long. total 5m - long. work 4m
With rotating unions with bearing
at both ends, external thread. G 1/4 "
With metal crease protection

Suitable for:
Wire cable cutter

230V / 1550W

also referenced under: OOMAOWELPR01, CRM 2, 142.717

Wire cross section: 16 mm²
Coupling plug wire cross section: 25 mm²
Coupling plug arbor: 9 mm
Earth clamp: 200 A
Length cable approx: 4 m

also referenced under: EMACWELDWMCG, CRM 21

260 A- 35% ED / electrodes max. 3.2 mm
Insulated according to EN 60974-11 with break-proof insulating shells made of glass-braided material for Allen cable lug connection

also referenced under: EMACWELDWMEH, CRM 22

DIN 894, size 36mm

IP20: Protection against ingress of foreign bodies of ⌀ < 12 mm, but all contact must be avoided, and no protection against water.

with centring jigs for conical and cylindrical cups
OOMAALIGGJ

220V, 2.5kW
2800 tr/min
110x60x150cm, 140kg

- Horizontal motor with 75x200mm abrasive pad
- M16 thread and T22 abrasive pinecone at the top of the shaft
- Foot switch operation
- Predisposition for connection to a centralized suction system
- diameter 150mm on the side
- Suction mouth behind the adjustable pad

380V, 2200W, 3000rpm
with dust collector

380V, 1.25kW / 1.7kW
with dust collector

Heating: 1x 2400W, 1x fan motor, heating active light
Thermostat: infinitely up to 250°C
Timer: infinitely 0 - 120 minutes, On/Off active light
Housing: Stainless steel, inside and outside, door with large viewing window, opens down to the front, double side bouncy supports
Accessories: 1 grill, 1 tray, standard
Power supply: 230V / 50Hz / 2,5 kW
Dimensions: outside: W 527 x D 450 x H 316 mm / inside : W 404 x D 308 x H 254 mm
Weight: 20 kgs

for aspirator hose

1280x650x(h)1250mm
2x 1500W / 220V

Dimensions WxDxH: 850 x 500 x 1140mm
Weight: 83,000kg
Max. stitch length: 5mm
Sewing speed: max. 300 stitches
Needle system: 332 L LG, 332 LG
Footprint: 1000 x 750mm
max. presser foot stroke: 12mm

Dimensions WxDxH: 850 x 500 x 1140mm
Weight: 83,000kg
Max. stitch length: 5mm
Sewing speed: max. 300 stitches
Needle system: 332 L LG, 332 LG
Footprint: 1000 x 750mm
max. presser foot stroke: 12mm

DURKOPP ADLER class 525i zigzag machines, lockstitch, have been designed with interchangeable control cams. They are specially made for the production of decorative stitches (outlines) on made-up clothes and ladies' underwear in textile materials. These machines can be used for sewing light and medium textiles and leathers.
230V / 50/60 Hz
Delivered with:
- Table 105,110 or 120cm south 55 or 60cm
- Fixed frame
- Electronic motor
- Oil
- Accessories

Dimensions WxDxH: 850 x 500 x 1140mm
Weight: 83,000kg
Max. stitch length: 5mm
Sewing speed: max. 300 stitches
Needle system: 332 L LG, 332 LG
Footprint: 1000 x 750mm
max. presser foot stroke: 12mm

3 positions

for 2 years maintenance

also referenced under: OOMAVAPUCR11, CRM 56.1

Body width: 490 mm
Body depth: 190 mm
Body height: 409 mm
Material of the housing: Plastic
Colour of housing: blue
Connection outlet: 1/4 in
maximum operating pressure: 16 bar
Hose external ⌀: 12 mm
Hose internal ⌀: 8 mm
Material of hose: Polyurethane
Colour of hose: blue
SCS automatic roll-up drum: yes

W=19mm / L=33m

PVC

optional oven equipment

also referenced under: OOMAOVENCR50T, CRM 39

The Pro-Fit 2000 features a solid steel body for smooth operation, a suction arm with fireproof suction tubing, a suction hood with a quick-change system as well as fastening materials and a safety package. The colour of the tool holder can be individually selected if desired. The standard accent colour is anthracite grey.
Electrical equipment Main safety switch, on/off button for router motor, emergency stop foot switch, 2.5 m power cord with 5x 16 A CEE plug and 5x 16 A CEE socket
Dimensions WxDxH 1,220 x 800 x 1,560 mm
Exhaust nozzle diameter 125 mm
Power cord Power cord with 5x 16 A CEE plug and 5x 16 A CEE socket
Working height 1,000 mm
Space requirements WxD 1,100 x 1,300 mm
Equipment Steel machine body, 5/8" milling shaft thread, adapter from 5/8" to M16 thread, suction hood, short and long shaft protector, exhaust nozzle for external suction system, tool set for changing the socket router cutters, tool holder
RPM milling motor one speed 3,000 rpm
Electrical connection in V/Hz/kW 3 x 400 / 50–60 / 2.2
Colour light grey [RAL 7035]
Accent colour anthracite grey [RAL 7016]
Router shaft length 395 mm
Weight 115  kg
Height adjustment No
Sound intensity level 68 dB[A]
Chip suction Connection to a central chip extraction system with a minimum air velocity of 20 m/s [exhaust nozzle diameter 125 mm]