3/8" - DN10, kit of 7 pieces

also referenced under: OOMAOPRECR75B, CRM 76.1

25 liters

also referenced under: OOMAOPRECR75E, CRM 71.6

400V/3500W/9.2Amps

also referenced under: OOMAOPRECR75, CRM 71

Uniformly heats thermoplastic sheet materials commonly used to form prosthetic and orthotic devices. Infinitely adjustable temperature. Heating surfaces are coated with air permeable Teflon sheeting.Two gas cylinders assist in lifting the cover and hold it open at a 45° angle.

Dimension : Out Side: W.125—D.110—H.90 cm
Dimension : Top cover Open: W.125—D.110—H.180 cm
Dimension : Heater Area: W.100—D.85 cm
Power Supply: 220 Volt 50 Hz
Power cord: With CEE plug 5 × 16 A and CEE socket 5 × 16
Heating Pipe: Type 12 pcs / 550 x 12 : 6.600 Watt
Temparature Control: Digital Control 250 °C Max. J Type
Process Completed: Sound and red warning lamp
Upper and Lower Surface: Teflon 0.25 mm
Color: Ral 7035 & 7045
Weight Net: 152 Kg
Boxed : Dimension and Total Weight: W.140 -D.120- H.120 cm 225 kg

Dimensions WxDxH: 1390 x 980 x 850 mm
Power requirements: 380V / 50 Hz / 9,9 kW
Temperature range: 50 °C - 200 °C
Working surface W x D: 1250 x 1050 x 860mm

Dimensions WxDxH: 1390 x 980 x 850 mm
Power requirements: 220V / 50 Hz / 9,9 kW
Temperature range: 50 °C - 200 °C
Working surface W x D: 1250 x 1050 x 860mm

- for heating thermoplastics (low temperature PE)
- good insulation of the device ensures rapid heating of the water
- with a cover
- dimensions 600 x 400 x 200 mm, 15 liters
- 230V

- for warming of thermoplastics (low temperature PE = Streifytherm,
Turbocast)
- the good insulation of the unit guarantees a fast warming of the water
Features
- with lid
- low energy consumption
- exact temperature adjustment
- capacity: 40 liters
Technical Data
- outer dimensions L x W x H: 770 x 430 x 340 mm
- inner dimensions L x W x H: 700 x 360 x 190 mm
- temperature range/digital display: 30 - 95° C
- accuracy: +/-1° C
- accesory: grate and drain
- power requirements: 230 V / 50 Hz / 0,9 kW
- material: stainless steel
- weight: 19,5 kg net

5m

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

Suitable for deep-drawing technology with outer rings and to dry plaster models, with 2 ventilators for uniform warming of plastic sheets, with steel support frame and a storage shelf for plastic sheets, with viewing window and space-saving opening mechanism, with interior illumination and electronic heat regulation. Complete heating cabinet, inside and outside made of stainless steel with an alu sliding shelf, covered in Teflon foils blanks, on ball-bearing mounted rollers.
Delivered with spare parts for 2 years

Technical data:
Exterior dimensions W x D x H: 1450 x 1480 x 1500mm
Interior dimensions W x D x H: 1200 x 1270 x 500mm
Working surface W x D: 1100 x 1030mm
Temperature range: 30° C - 200°C
Power requirements: 400 V / 50 Hz / 4,5 kW
Weight: 280kg

also referenced under: OOMAOVENCR50G, CR5000G

750W/220V, L=84cm

also referenced under: OOMAOVENCR50H, CRM 38

750W/220V, L=98cm

also referenced under: OOMAOVENCR50HG, CRM 45

Granulator for polypropylene, 400V/15kW, 280 à 330kg/h
Blades made of high-resistant steel ensuring longest usage times
Hopper, cutting chamber, and discharging base are separable for convenient cleaning, parts replacement, and maintenance
Double sound-insulation device in the cutting chamber reducing noise to the minimum
Motor over-load protection and interlocking device well protecting machine itself and ensuring operator safety
Blades can be sharpened for several times after getting blunt to extend blades’ lifespan and save cost

also referenced under: OOMAGRAN300, CRM 78

E14 / 25W / 300°C / 230V

also referenced under: OOMAOVENCR50BC, CRM 34

E14 / 40W / 300° C / 230V

also referenced under: OOMAOVENCR50B, CRM 33

2 A, DO 1 GL

also referenced under: OOMAOVENCR50F02, CRM 41

10 A, DO 1 GL

also referenced under: OOMAOVENCR50F10, CRM 42

D 12cm

220V / 50Hz / 0,2 kW
Teflon coated as protection, range of regulation: 100-180°C
with stand and 1,40m cable

also referenced under: OOMAVAPUCR10R, CRM 67

also referenced under: OOMAVAPUCR10H, CRM 61

also referenced under: OOMAVAPUCR10C, CRM 69

∅11 to 17mm

Filter surface area: 1.92 m²
Material: Felt
Thickness: 0.7 mm
Diameter: 413 mm
Length approx.: 1100 mm
Width/depth approx.: 650 mm

also referenced under: OOMAOVENCR50FC, CRM 36

Cone diameters: ⌀48.3 / ⌀88.9

also referenced under: OOMAVAPUCR103, CRM 59

Cone diameters: ⌀84 / ⌀129

also referenced under: OOMAVAPUCR102, CRM 58, CR 8910

Cone diameters: ⌀104 / ⌀154

also referenced under: OOMAVAPUCR101, CRM 57, CR 8900

Length approx: 280 mm
Width/depth approx: 125 mm
Height approx: 140 mm
Weight approx: 2.3 kg
Supply voltage: 230 V
Mains frequency: 50/60 Hz
Electrode: 4.2 kVA
Electrode: 5 – 150 A
TIG DC: 5 – 150 A

also referenced under: OOMAOWELMA01, CRM 11, PRO-STICK 161

400W, 2 pieces

also referenced under: OOMAOPRECR75F, CRM 71.3

includes 2 thermoregulatore and 2 probes

also referenced under: OOMAMARP3000M, CRM 88

Oscillating plaster saw. Power : 500 W.
From 6.500 to 24.000 oscillations/minute.
Weight : 1.528 kg.
Supplied with 2 blades : Ø 50 and Ø 65 mm for natural plaster.

950W
560 tr/min

- Oil-free piston compressor, therefore no oil change necessary and no oil in condensate
- Fully automatic on-turn-off mode
- Electric motor equipped with motor protection switch
- One pressure gauge for displaying the container and working pressure

also referenced under: MOBILBOY 221/24 OF E

Chip collection volume: 110 l
Extraction duct inlet outside nominal width: 203 mm
Extraction duct outlet outside nominal width: 1 x 100, 1 x 120 mm
Length approx.: 1000 mm
Width/depth approx.: 500 mm
Height approx.: 2100 mm
Weight approx.: 39 kg
Idle Speed: 2950 min¯¹
Motor input: 1.5 kW
Supply voltage: 230 V
Mains frequency: 50 Hz
Filter surface area: 1.92 m²
Max. sound pressure level: 85.7 dB(A)
Rated volume flow: 1900 m³/h
Max. negative pressure: 1700 Pa

Comprising : 1 blower, 120W, 1 electrical relay, housing, 2m electrical cable, pipe D 75mm/2m, 1 pipe collar D 75mm, 1 blowing nozzle, 1 nozzle holding bar L 880mm, 1 sheet metal collector, 1 flange D 100mm for aspirator connection

also referenced under: OOMADUSTAS01A, CRM 84.5

230V/1100W/7.5A, 570-890 m3/h, dimensions 1200/600/H1'380mm

also referenced under: OOMADUSTAS01, CRM 107