D 12cm

10 A, DO 1 GL

also referenced under: OOMAOVENCR50F10, CRM 42

2 A, DO 1 GL

also referenced under: OOMAOVENCR50F02, CRM 41

E14 / 40W / 300° C / 230V

also referenced under: OOMAOVENCR50B, CRM 33

E14 / 25W / 300°C / 230V

also referenced under: OOMAOVENCR50BC, CRM 34

Granulator for polypropylene, 400V/15kW, 280 à 330kg/h
Blades made of high-resistant steel ensuring longest usage times
Hopper, cutting chamber, and discharging base are separable for convenient cleaning, parts replacement, and maintenance
Double sound-insulation device in the cutting chamber reducing noise to the minimum
Motor over-load protection and interlocking device well protecting machine itself and ensuring operator safety
Blades can be sharpened for several times after getting blunt to extend blades’ lifespan and save cost

also referenced under: OOMAGRAN300, CRM 78

750W/220V, L=98cm

also referenced under: OOMAOVENCR50HG, CRM 45

750W/220V, L=84cm

also referenced under: OOMAOVENCR50H, CRM 38

Suitable for deep-drawing technology with outer rings and to dry plaster models, with 2 ventilators for uniform warming of plastic sheets, with steel support frame and a storage shelf for plastic sheets, with viewing window and space-saving opening mechanism, with interior illumination and electronic heat regulation. Complete heating cabinet, inside and outside made of stainless steel with an alu sliding shelf, covered in Teflon foils blanks, on ball-bearing mounted rollers.
Delivered with spare parts for 2 years

Technical data:
Exterior dimensions W x D x H: 1450 x 1480 x 1500mm
Interior dimensions W x D x H: 1200 x 1270 x 500mm
Working surface W x D: 1100 x 1030mm
Temperature range: 30° C - 200°C
Power requirements: 400 V / 50 Hz / 4,5 kW
Weight: 280kg

also referenced under: OOMAOVENCR50G, CR5000G

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

5m

- for warming of thermoplastics (low temperature PE = Streifytherm,
Turbocast)
- the good insulation of the unit guarantees a fast warming of the water
Features
- with lid
- low energy consumption
- exact temperature adjustment
- capacity: 40 liters
Technical Data
- outer dimensions L x W x H: 770 x 430 x 340 mm
- inner dimensions L x W x H: 700 x 360 x 190 mm
- temperature range/digital display: 30 - 95° C
- accuracy: +/-1° C
- accesory: grate and drain
- power requirements: 230 V / 50 Hz / 0,9 kW
- material: stainless steel
- weight: 19,5 kg net

- for heating thermoplastics (low temperature PE)
- good insulation of the device ensures rapid heating of the water
- with a cover
- dimensions 600 x 400 x 200 mm, 15 liters
- 230V

Dimensions WxDxH: 1390 x 980 x 850 mm
Power requirements: 220V / 50 Hz / 9,9 kW
Temperature range: 50 °C - 200 °C
Working surface W x D: 1250 x 1050 x 860mm

Dimensions WxDxH: 1390 x 980 x 850 mm
Power requirements: 380V / 50 Hz / 9,9 kW
Temperature range: 50 °C - 200 °C
Working surface W x D: 1250 x 1050 x 860mm

Uniformly heats thermoplastic sheet materials commonly used to form prosthetic and orthotic devices. Infinitely adjustable temperature. Heating surfaces are coated with air permeable Teflon sheeting.Two gas cylinders assist in lifting the cover and hold it open at a 45° angle.

Dimension : Out Side: W.125—D.110—H.90 cm
Dimension : Top cover Open: W.125—D.110—H.180 cm
Dimension : Heater Area: W.100—D.85 cm
Power Supply: 220 Volt 50 Hz
Power cord: With CEE plug 5 × 16 A and CEE socket 5 × 16
Heating Pipe: Type 12 pcs / 550 x 12 : 6.600 Watt
Temparature Control: Digital Control 250 °C Max. J Type
Process Completed: Sound and red warning lamp
Upper and Lower Surface: Teflon 0.25 mm
Color: Ral 7035 & 7045
Weight Net: 152 Kg
Boxed : Dimension and Total Weight: W.140 -D.120- H.120 cm 225 kg

400V/3500W/9.2Amps

also referenced under: OOMAOPRECR75, CRM 71

25 liters

also referenced under: OOMAOPRECR75E, CRM 71.6

3/8" - DN10, kit of 7 pieces

also referenced under: OOMAOPRECR75B, CRM 76.1

Impact drill with high-performance motor with high torque for very heavy duty applications (drilling, working with drills, masonry hole saws and hole saws) as well as screwdriving and smoothing.

New safety handle with innovative fastening and softgrip for secure holding of the machine.
Sturdy metal gearbox for long working life.
Mechanical overload clutch Anti-rotation for high working security even for the toughest applications
Single-sleeve quick-change chuck with auto-lock for quick tool-changing using only one hand.
Rotatable brush plate for equal torque in clockwise and anti-clockwise directions.
Spindle neck ⌀ 43 mm (European standard) − can be used in drill stands.
2-speed gearbox.

Enhanced user protection by KickBack Control.

Supplied with 13 mm quick-change chuck, additional handle, depth stop 210 mm, L-BOXX 136.
Manufacturer's designation: GSB 24-2
Power consumption: 1,100 W
maximum torque: 40 N·m
Drill chuck adapter: 1/2 inch − 20 UNF
maximum speed 1st speed: 900 min-1
maximum speed 2nd speed: 3,000 min-1
maximum twist drill size ⌀ in steel: 16 mm
maximum twist drill size ⌀ in wood: 40 mm
maximum twist drill size ⌀ in concrete: 22 mm
maximum hammer rate: 15,300 min-1
Quick-clamping chuck range: 1.5 mm - 13 mm
Weight: 2.9 kg
maximum vibration to EN: 14.6 m/s2

Stainless steel housing inside, textured paint RAL 5017 (traffic blue) contrasting color
RAL7035 (light gray) outside, surface heating with 16 infrared quartz tubes,
Temperature measurement of the material surface using an opto-electronic IR measuring head,
Programming steplessly from 30 ° C to 250 ° C via PID controller, 2-line display with
Display of target and actual temperature, quick selection button to call up 4 free
selectable temperature values, double wing door with two double glass viewing windows,
Interior lighting 4x25W, 1 insert plate with Teflon coating,
Electrical connection: 400V / 50-60Hz / 3Ph. / 7.4 kW (CEE 16 Amp.)
Dimensions: outside WxDxH: 900x1300x890 mm
Inside WxDxH: 810x1160x540 mm
Net weight: approx. 230 kg

Stainless steel housing inside, spray paint outside, Heating with 8
Infrared-Quartz-Tubes, Temperature measurement of the Material surface by
opto-electr. IR-sensor, infinitely adjustable from 30 C to 250 C by SPS controller with
PID feature, Software build 3.0 with maintenance info, programmable Ramp- and
Timer-feature with an option to store slowly raising heat processes, monitoring of the
heating process by graphical trend, Double-Frontdoor with double pane Window, 2x
25W Illum. bulb, 1x tray with teflon
colour: RAL7035 (light-grey) / RAL 7031 (blue-grey)
Electr. Conn.: 380-400V / 50-60Hz / 3Ph. / 3,7 kW (16 Amp. CEE)
Dim.: outside: WxDxH: 900x700x920 mm
inside: WxDxH : 810x580x540 mm
net weight: 133 kgs

The new IR1001 COMPACT is of course equipped with the innovative optical temperature sensor and a con- troller of the next generation. Same as the larger Infrared-ovens the two-line PID-Controller keeps the user constantly updated of the preset and actual temperature values. The preselect feature allows the user to store four temperature settings which can be easily called up by use of a single button. A signal light informs the user when the set temperature is reached, even if he is not standing right in front of the control panel.

Technical Data: IR1001 COMPACT
Type: IR1001 COMPACT - Infrared Oven for the O&P field, Bench-top design
Footprint: approx. 1m²
Dimensions: Outside: W 1270 mm - D 920 mm - H 455 mm / Inside: W 1000 mm - D 800 mm - H 140 mm
Tray: tray movable full size on ball bearing guides, easy to remove without tools for fast teflon replacement, effective heating area: W 950 x D 750 mm
Power supply: 400V / 50/60Hz / 3 Phase / (16 Amp. CEE) / total capacity 7,7 kW, (other voltages available)
Heating: 12 Infrared-Quartz-tubes with reflector, Stand-by switch
Temperature control: opto-electronic IR-measuring unit, Measuring of the material´s surface temperature!
Temperature control: PID-Controller, infinitely variable from 30°C to 250°C

2 pieces, 1 long, 1 short

also referenced under: OOMAOPRECR75N, CRM 77

With roll-about tray, 220V-380V / 20kW / 50Hz, working height: 1800x1600x400mm
External dimensions: 2000x1700x500mm

Sturdy general-purpose jigsaws with metal gearbox casings and overload protection.
With FIXTEC quick-release clamping system allows blades to be changed in seconds without any tools, and selectable orbital stroke for optimum cutting power and dust extraction combined with reduced saw blade wear.
Supplied with:
Supplied with chip break guard.
Supplied with 2 × saw blades, extraction adapter, sole plate, mains cable 4 m, carrying case.
Packaging: Carrying case
Manufacturer's designation: STEP1200XE
Power consumption: 730 W
Rate of strokes: 500 min-1 - 3,000 min-1
maximum sawn thickness steel: 10 mm
maximum sawn thickness wood: 135 mm
Mitre angle adjustment: Yes
Orbital stroke: 4-way
Weight: 2.4 kg
maximum vibration to EN: 10.5 m/s2
tool change without tools: yes, FIXTEC system

1 green, 1 red, 1 emergency stop

for inserting the knee tube inside the concave cylindre

also referenced under: OOMAALIGMIM

Compact unit to provide vacuum for two Lamination work-places (4 separate inlets) +
1 direct-connection for vacuum supply, with integr. vacuum-pump + Vacuum-tank / 6m³/h / -0,8bar
Type: Laminating device TLV6-II
Vacuum-Pump: 6 m3/h / oil- and maintenance-free / end-vacuum 200mbar
Inlet / connections: 4x 8mm, separately switchable, 1x DIN coupling for vacuum supply etc.
Filter: dust-filter, per inlet
Vacuum automatic: standard
Power supply: 230V / 50Hz
Dimensions: W 435 x D 390 x H 240 mm
Weight: 22 kgs

incl. mounting bar for workbench assembly

incl. mounting bar for workbench assembly

Dimensions WxDxH: 1.500 x 700 x 970/1.970 mm
Volume flow: Recommended: 550 m³/h
Weight: 235,5 kg
Material: Steel/wood
Exhaust nozzle Ø: 180 mm
Scope of delivery: Connection to a vacuum system, e.g. 755E600=* vacuum system, workbench with cabinet and shelves, bench-top cabinet with roll storage and suction slots, 758Z145=10 cutting and gluing worktop with edge suction, 2 x 704G11 clamping fixture for suction pipes "Orthofix"

The lamination bench consists of a frame with a storage surface (grid tray), a work surface for gluing work, a vacuum control box, vacuum points and clamping devices for exhaust tubes. The bench-top cabinet firmly connected to the lamination bench includes a storage surface (grid tray), a roll holder for stockinette materials, suction slots on both sides and a connection for an external fan to extract vapours.

Dimensions WxDxH: 1,750 x 650 x 750/1,750mm
Version: 3 pc. 704G11 clamping device
Diameter of exhaust nozzle for vapour extraction: 180mm
Weight: 135,1kg
Vapour extraction volume flow: Recommended 850 m³/h

for bulb: E14, 40W, 240V, 550C

also referenced under: OOMAOVENCR50L, CRM 32

For processing all types of leather, rubber and other materials. With long arm and frame pressing device. Cutting width up to 190 mm, splitting and cutting width max. 30 mm.

Powerful and compact Li-Ion batteries.
No memory effect.
No loss of power.
Low self-discharge.
Fast battery charging.
Also very efficient at temperatures below 0 ° C.
Bosch CoolPack - Optimal protection of cells against overheating thanks to the special heat sink housing under the battery.

for inserting eyelets, hooks, push buttons, etc. also for punching with thread adaptor (Daude) for upper puncher, radius=150mm

- Ideal for sawing steel, aluminum, copper, PVC and Teflon
- Stepless, electronic speed control from 30 - 80 m / min
- Particularly quiet - up to 60% quieter than comparable band saws
- Low vibration and wear thanks to special gearbox with two large gears made of hardened steel
- Guaranteed cutting accuracy of max. 0.3 mm course over 100 mm cutting length
- Each machine individually tested for precision in Italy
- Low-speed DC drive motor with carbon brushes for up to 10 times longer life
- Electronic temperature and ampere recording monitoring against overload
- Cast strip wheels with ground running surface without rubber pads, therefore suitable for dry and wet cutting
- Massive saw bar made of die-cast aluminum (readjustable from MBS 125) and with sturdy transport lock
- Two movable, adjustable saw band guides with chip scraper made of metal
- Particularly stable base plate with non-slip feet
- Very service-friendly, as components are easily accessible

also referenced under: MBS 105, CRM 116