Swivel range of ± 45 °
Easy-to-read angle scale enables precise work
Seconds adjustment of the miter
Protected vise spindle
Massive machine base on both sides with holes for the mounting of the material stand MSR
Long handle allows sawing without great effort with integrated push-button (on / off)
Automatic switching on of the coolant pump when sawing
Functional protection device, closed construction, movable
Fast opening mechanism for optimum safety when cutting
Centrally exciting vise, 4-fold guided with individually adjustable clamping jaws. Cutting always takes place in optimal position to the workpiece
Massive machine base
Protected vise spindle
Machine base sizes:
- CS 275 - 460 x 515 x 775 mm and
- CS 315 - 546 x 620 x 801 mm
The saw is delivered without circular saw blade (saw blade division freely selectable)

also referenced under: OPTIsaw CS 275, CRM 115

400V, 1.2kW, volume 40m³ / h, 25L tank

slide system for loading the mold inside the press before each injection

also referenced as: OOMAOPRECR75A, CRM72

CHARACTERISTICS
- Motor shaft 1400rpm
- 35mm abrasive accessories
- Horsehair brush and waxing pad
- Cutter shaft 6000rpm with cutter rule
- Pumice motor
- Internal extractor fan
- Dust recovery system with extractable drawers
- Internal fabric filter with back panels for double filtration

MACHINE DIMENSIONS
- Width 900mm - Depth 600mm - Height 1500mm - Weight 140 Kg

POWER SUPPLY
- Single-phase 230V - 1ph - 50Hz

PFAFF

PFAFF

PFAFF

PFAFF

PFAFF

⌀53mm

also referenced under: OOMAOPRECR75D1, CRM 71.9

380V, 1.27 - 1.7kW

also referenced under: OOMAMARPOL3500, CRM 89

solid sheet steel construction, safety switch with timer, separate sole press with air cushion filling and toothed rack locking, separate heel press, swivel V-pressure arm, hook back-wall for holding the inner-pressure plates, separate compressed air connection with pressure reducer and pressure gauge, fully automatic compressor system, quick release for press cushion, adjustable bars on fixture device, inflation/deflation valve with reset function. Two side-mounted orthopaedics press stations, without cushion. Left: clear width 450 mm, right: clear width 300 mm, 1 set (12 pairs) inside-pressure plates

Dimensions LxPxH: 1250 x 740 x 1780 mm
Exigences d'alimentation: 400 V / 50 Hz / 0,55 kW

Weight: 250 kg

Market-leading oscillating tools in three different performance classes (SuperCut, MultiMaster, MultiTalent) in a new version with Starlock tool arbor (improved torque transmission of up to 35 % greater rate of progression of the work).
Virtually unlimited application possibilities (sawing, grinding, scraping, cutting, rasping) due to the oscillating mode of movement (low generation of dust).
Stepless electronic speed control for optimum working.
Very high quality and stability thanks to the metal gearbox and use of ball bearings and needle bearings throughout.
Optimum handling due to ergonomic design with soft-grip inlays and low weight.
Supplied with:
1 toolbox set “QuickStart” containing:1 abrasive plate, 3 each abrasive discs (80, 120, 180 grit), 1 E-Cut universal saw blade (44 mm).
Packaging: Carrying case
Manufacturer's designation: MM 300 Plus Start
Power consumption: 250 W
Toolholder: StarlockPlus, Starlock
Speed of oscillation: 11,000 min-1 - 20,000 min-1
Amplitude (oscillation movement): 2 × 1.6 degrees
Weight: 1.4 kg
Cable length: 5 m

The most efficient oscillating machines, available in three power categories (SuperCut, MultiMaster, MultiTalent); new model with Starlock tool carrier (optimized power transmission for up to 35% faster working speed).
Almost unlimited applications (sawing, grinding, scraping, cutting, grating) thanks to the oscillating movement (low dust emission).
Electronic progressive adjustment of the rotation speed for optimal use.
Maximum quality and stability thanks to the metal gear case and the combined use of ball and needle bearings.
Optimal maneuverability thanks to the ergonomic design and the Softgrip coating, reduced weight.
Powerful MultiTool for rapid progress (for interior design and renovation) with more than 30 accessories for sawing in wood and metal, sanding, cutting tiles, etc.
Delivery:
Set of 30 accessories, 1 × suction device, 1 × plastic tool case.
Set of 30 accessories: 1 × E-Cut Long-Life saw blade - (10 mm), 2 × E-Cut Long-Life saw blades (35 mm), 2 × E-Cut Long-Life saw blades ( 65 mm), 1 × E-Cut Carbide Pro saw blade (32 mm), 1 × carbide saw blade (⌀ 75), 1 × carbide rasp (triangular), 1 × spatula, 1 × perforated backing pad , 1 × perforated sanding sheet each (grit 60, 80, 120, 180).
With 1 × ALG 80 rapid charger, 2 × Li-Ion batteries (18 V / 3 Ah).
1 “Akku” case with charger, 1 backing pad, 3 sanding sheets each (grain 60, 80, 120, 180), 1 fixed spatula, 1 HSS segment saw blade, 1 Long-Life E- saw blade Cut (65 mm), 1 E-Cut universal saw blade (44 mm).
Manufacturer no .: AFMM 18 QSL
Number of batteries included: 2
Battery type: Lithium-ion
Battery capacity: 3 A h
Battery voltage: 18V
Tool holders: StarlockPlus, Starlock
Number of oscillations: 11'000 min-¹ - 18'500 min-¹
Oscillation angle: 3.4 °
Angle approach of the support plate: 80 mm
Weight: 1.8 kg

With pneumatic door
Temperature: 60° to 250°
50-60Hz, 850W
Dimensions outside: 1640x1134x1756mm
Working area: 1828x1828mm

including Rollabout Tray with integrated Blister Forming frame cradle
Heating with 12 Infraredt-Quartz-Tubes, Temp. measurement of the Material surface by
opto-electr. IR-sensor, infinitely adjustable from 30 C to 250 C by SPS controller with
PID feature, Software build 3.x with maintenance info, programmable Ramp- and
Timer-feature with an option to store slowly raising heat processes, monitoring of the
heating process by graphical trend, tefloncoated (replaceable) Rollabout Tray, 4
casters with stop, height adjustable by gas-shock (min. 820mm, max. 1050 mm),
integrated Blister forming cradle, width adjustable, retractable when not in use, vert.
Frontdoor with double pane Window, double gas-shock supported, Illum. by two 25W bulbs,
colour: RAL7035 (light-grey), net weight 230kgs
Electr. Conn.: 400V / 50-60Hz / 3Ph. / 5,9 kW (CEE 3x 16Amp.)
Dim.: outside HxWxD: 1420x1320x970 mm
inside HxWxD : 500x1000x800 mm

including Rollabout Tray with integrated Blister Forming frame cradle
Heating with 18 Infraredt-Quartz-Tubes, Dual-Zone switching (6/18), Temp.
measurement of the Material surface by opto-electr. IR-sensor, infinitely adjustable
from 30 C to 250 C by SPS controller with PID feature, Software build 3.x with
maintenance info, programmable Ramp- and Timer-feature with an option to store
slowly raising heat processes, monitoring of the heating process by graphical trend,
tefloncoated (replaceable) Rollabout Tray, 4 casters with stop, height adjustable by
gas-shock (min. 820mm, max. 1050 mm), integrated Blister forming cradle, width
adjustable, retractable when not in use, vertical Frontdoor with double pane Window,
double gas-shock supported, Illum. by two 25W bulbs, integrated Pre-Preg hose duct
at the left side,
colour: RAL7035 (light-grey) / RAL7031 (blue-grey), net weight 290kg
Electr. Conn.: 380-400V / 50-60Hz / 3Ph. / 8,5kW (CEE 3x 16Amp.)
Dim.: outside HxWxD: 1400x1595x1270 mm
inside HxWxD : 500x1300x1090 mm

including Rollabout Tray with integrated Blister Forming frame cradle
Heating with 24 Infrared-Quartz-Tubes, Dual-Zone switching (6/24), Temp.
measurement of the Material surface by opto-electr. IR-sensor, infinitely adjustable
from 30°C to 250°C by SPS controller with PID feature, Software build 3.0 with
maintenance info, programmable Ramp- and Timer-feature with an option to store
slowly raising heat processes, monitoring of the heating process by graphical trend,
tefloncoated (replaceable) Rollabout Tray, 4 casters with stop, height adjustable by
gas-shock (min. 820mm, max. 1050 mm), integrated Blister forming cradle, width
adjustable, retractable when not in use, vertical Frontdoor with double pane Window,
double gas-shock supported, Illum. by two 25W bulbs, colour: colour: RAL7035
(light-grey) / RAL7031 (blue-grey), net weight 360kg
Electr. Conn.: 380-400V / 50-60Hz / 3Ph+N+PE. / 11,1 kW (3 x 32A CEE)
Dim..: outside WxDxH: 1595x1770x1400 mm
inside WxDxH : 1300x1590x500 mm

Complete thermoforming device with filtration and regulation of vacuum supply.
Two working positions :
- horizontal tube for thermoforming by lay-up (ex : for spinal orthoses)
- vertical adaptator for thermoforming by stamping (ex : for sockets)

resistant to almost all chemicals, non-combustible, embrittled, will not crack, become crumbly or sticky, quick and clean application, for trouble-free sealing of fine threads up to 3/8 inch for almost all fluids, application range from -240 ° C to +260°C

also referenced under: OOMAVAPUCR10T, CRM 68

1m x 10m

also referenced under: OOMAOVENTEFLON, CRM 55

High-speed post-bed sewing machine with post right of the needle, single needle double-stick, with needle and wheel feed and driven presser foot, curved needle plate Version B = medium
Equipped with electromagnetic thread trimmer 900/81, presser foot lift, automatic start and end lock.
Table base 106 × 50 cm with slanted base, machine tilted forwards, stable, sturdy support frame made of square steel tubing 230 V servomotor and control panel
Dimensions W x D x H: 1060 x 500 x 1300 mm
Max. stitch length: 4,5 mm
Clearance under presser foot: 7 mm
Sewing speed: 3000 Stitch/min.
Needle system: 134 R
Power requirements 230 Volt, 50 Hz., 0,370 kW
Weight 100,000 kg

All technical data is based on an operating pressure of 6.3 bar and the indiqué inside pipe shown.
A range of powerful and very quiet revolver-type drills with a maximum drilling power of 13 mm in steel. Air exhaust through the handle prevents swirling of chips. With quick-release chuck.
Discharge power: 350W
Maximum rotation speed: 0 min-1 - 2400 min-1
Quick clamping chuck clamping range: 1.5mm - 10mm
Maximum quantity of absorbed air: 600 l / min
Threaded connection: BSP
Pneumatic connection: 1/4 inch
Recommended hose size (⌀ int.): 10 mm
Weight: 1 kg
Sound level: 82 dB (A)
Maximum vibrations according to EN: <2 m / s2
Length: 211 mm

Type: PO1200 - Convection Oven for the O&P field
Special unit, otimized for Pre-Preg processingt
Footprint: ~ 1,2 m²
Dimensions: Outisde: W 1230mm - D 920mm - H 1570mm
Inside: W 1000mm - D 620mm - H 1200mm
Housing: Moveable on 4 casters with stop, double doors with double-pane viewing
window
Three zone heating cabinet segmentation by intermediate shelf
Electr. Connection: 400V / 50Hz / 3 Phase / (16 Amp. CEE) / total capacity 10,2 kW
other voltages on request
Heating: 3x 3300W, 3x fan motor with reversing rotation diretion
Temperature sensor: either by oven or mould/material temperature
Temperature control: Microprocessor controlled, User interface with touch-panel, PID-controller
feature, Temperature infinitely adjustable 30°C to 250°C, Temperature unit
adjustable °C/°F , Timer- and Ramp-feature individually programable, graphic
trend indicator, multi-lingual user interface (DE,EN,FR,IT)
Illumination: 2 x 25 watts
Colour: Inside stainless steel, outside structural effect paint RAL 7035 light grey,
other RAL colours available on request (surcharge)
Weight: net: 283 kgs
gross: 418 kgs (incl. crate)
Accessories: • Universal-crate for Blister-Forming frame
(width adjustable) (Art. No. 07-131)
• Blister-Forming frame D=360mm (Art. No. 07-132)
• Baumeister Pre-Preg Set for PO ovens

Type: PO1800 - Convection Oven for the O&P field
Special unit, otimized for Pre-Preg processingt
Footprint: ~ 1,2 m²
Dimensions: Outisde: W 1230mm - D 920mm - H 1950mm
Inside: W 1000mm - D 620mm - H 1790mm
Housing: Moveable on 4 casters with stop, double doors with double-pane viewing
window
Three zone heating cabinet segmentation by intermediate shelf
Electr. Connection: 400V / 50Hz / 3 Phase / (16 Amp. CEE) / total capacity 10,2 kW
other voltages on request
Heating: 3x 3300W, 3x fan motor with reversing rotation diretion
Temperature sensor: either by oven or mould/material temperature
Temperature control: Microprocessor controlled, User interface with touch-panel, PID-controller
feature, Temperature infinitely adjustable 30°C to 250°C, Temperature unit
adjustable °C/°F , Timer- and Ramp-feature individually programable, graphic
trend indicator, multi-lingual user interface (DE,EN,FR,IT)
Illumination: 2 x 25 watts
Colour: Inside stainless steel, outside structural effect paint RAL 7035 light-grey,
other RAL colours available on request (surcharge)
Weight: net: 395 kgs
gross: 550 kgs (incl. crate)
Accessories: • Universal-crate for Blister-Forming frame
(width adjustable) (Art. No. 07-131)
• Blister-Forming frame D=360mm (Art. No. 07-132)
• Baumeister Pre-Preg Set for PO ovens

D 60 mm, 0-250 bars

Dimensions: 865x670x1125-1525mm
Power: 0.75 kW
Voltage: 230V
Amperage: 7A

The Pro-Fit 2000 features a solid steel body for smooth operation, a suction arm with fireproof suction tubing, a suction hood with a quick-change system as well as fastening materials and a safety package. The colour of the tool holder can be individually selected if desired. The standard accent colour is anthracite grey.
Electrical equipment Main safety switch, on/off button for router motor, emergency stop foot switch, 2.5 m power cord with 5x 16 A CEE plug and 5x 16 A CEE socket
Dimensions WxDxH 1,220 x 800 x 1,560 mm
Exhaust nozzle diameter 125 mm
Power cord Power cord with 5x 16 A CEE plug and 5x 16 A CEE socket
Working height 1,000 mm
Space requirements WxD 1,100 x 1,300 mm
Equipment Steel machine body, 5/8" milling shaft thread, adapter from 5/8" to M16 thread, suction hood, short and long shaft protector, exhaust nozzle for external suction system, tool set for changing the socket router cutters, tool holder
RPM milling motor one speed 3,000 rpm
Electrical connection in V/Hz/kW 3 x 400 / 50–60 / 2.2
Colour light grey [RAL 7035]
Accent colour anthracite grey [RAL 7016]
Router shaft length 395 mm
Weight 115  kg
Height adjustment No
Sound intensity level 68 dB[A]
Chip suction Connection to a central chip extraction system with a minimum air velocity of 20 m/s [exhaust nozzle diameter 125 mm]

also referenced under: OOMAOVENCR50T, CRM 39

optional oven equipment

PVC

W=19mm / L=33m

Body width: 490 mm
Body depth: 190 mm
Body height: 409 mm
Material of the housing: Plastic
Colour of housing: blue
Connection outlet: 1/4 in
maximum operating pressure: 16 bar
Hose external ⌀: 12 mm
Hose internal ⌀: 8 mm
Material of hose: Polyurethane
Colour of hose: blue
SCS automatic roll-up drum: yes

for 2 years maintenance

also referenced under: OOMAVAPUCR11, CRM 56.1

3 positions

Dimensions WxDxH: 850 x 500 x 1140mm
Weight: 83,000kg
Max. stitch length: 5mm
Sewing speed: max. 300 stitches
Needle system: 332 L LG, 332 LG
Footprint: 1000 x 750mm
max. presser foot stroke: 12mm

DURKOPP ADLER class 525i zigzag machines, lockstitch, have been designed with interchangeable control cams. They are specially made for the production of decorative stitches (outlines) on made-up clothes and ladies' underwear in textile materials. These machines can be used for sewing light and medium textiles and leathers.
230V / 50/60 Hz
Delivered with:
- Table 105,110 or 120cm south 55 or 60cm
- Fixed frame
- Electronic motor
- Oil
- Accessories

Dimensions WxDxH: 850 x 500 x 1140mm
Weight: 83,000kg
Max. stitch length: 5mm
Sewing speed: max. 300 stitches
Needle system: 332 L LG, 332 LG
Footprint: 1000 x 750mm
max. presser foot stroke: 12mm

Dimensions WxDxH: 850 x 500 x 1140mm
Weight: 83,000kg
Max. stitch length: 5mm
Sewing speed: max. 300 stitches
Needle system: 332 L LG, 332 LG
Footprint: 1000 x 750mm
max. presser foot stroke: 12mm

1280x650x(h)1250mm
2x 1500W / 220V

for aspirator hose

Heating: 1x 2400W, 1x fan motor, heating active light
Thermostat: infinitely up to 250°C
Timer: infinitely 0 - 120 minutes, On/Off active light
Housing: Stainless steel, inside and outside, door with large viewing window, opens down to the front, double side bouncy supports
Accessories: 1 grill, 1 tray, standard
Power supply: 230V / 50Hz / 2,5 kW
Dimensions: outside: W 527 x D 450 x H 316 mm / inside : W 404 x D 308 x H 254 mm
Weight: 20 kgs

380V, 2200W, 3000rpm
with dust collector