Bosch Quigo, working area : 10 m

Compact non-woven discs provide a repeatable finish because the fine abrasive grain is always in contact. No modification of the part geometry, no formation of ridges, long service life.

TINA knives for the highest demands.

Finest handmade special knives "made in Germany" for leather and book restoration.

In a special hardening process, a unique quality is achieved that has been appreciated by users for decades.

made of premium steel, forged, hardened and sharpened, concave ground cutting edge, PVC blade guard, blade length 240mm, blade width 30mm, weight 400g

The compromise center of rotation for accurate location of orthosis joints based on Nietert can be marked directly on the leg. The a-p knee width is divided by the proportion 60:40 at a distance of 25 mm above the gap between tibia and femur.

HSS, 25 pieces, D 1 to 13mm by step of 0.5mm

HSS, 19 pieces, D 1 to 10mm by step of 0.5mm

Tool material: HSS
Type: N
Helix angle: 35-40 °
Shank: Plain shank

Standard core without core taper.
Precision ground point.
Profile ground:
High concentricity and pitch accuracy, drills for series production use.
With point geometry shape C from size 2.4 mm
Coating: TiN

Optimized for material: Wood
Panel thickness (soft wood): 3-65 mm

also referenced under: EMACSAWSJ6B2

Optimized for material: Steel

also referenced under: EMACSAWSJ6B3

- Optimized for material: Polypropylene (PP), Polyethylene (PE)

also referenced under: EMACSAWSJ6B1

Sturdy general-purpose jigsaws with metal gearbox casings and overload protection.
With FIXTEC quick-release clamping system allows blades to be changed in seconds without any tools, and selectable orbital stroke for optimum cutting power and dust extraction combined with reduced saw blade wear.
Supplied with:
Supplied with chip break guard.
Supplied with 2 × saw blades, extraction adapter, sole plate, mains cable 4 m, carrying case.
Packaging: Carrying case
Manufacturer's designation: STEP1200XE
Power consumption: 730 W
Rate of strokes: 500 min-1 - 3,000 min-1
maximum sawn thickness steel: 10 mm
maximum sawn thickness wood: 135 mm
Mitre angle adjustment: Yes
Orbital stroke: 4-way
Weight: 2.4 kg
maximum vibration to EN: 10.5 m/s2
tool change without tools: yes, FIXTEC system

Execution:
Body in anodized aluminum, deburring cone in special hardened steel.
Use:
Professional interior and exterior deburring of stainless steel, steel, copper, plastic and aluminum pipes.
Technical data
For ⌀ tube: 8 mm - 35 mm
Use: Stainless steel; Steel; Copper; Aluminum
Material: Special hardened steel
Housing material: Anodized aluminum

Pale Chinese bristle. White plastic binding, unpainted wooden handle.

Impact drill with high-performance motor with high torque for very heavy duty applications (drilling, working with drills, masonry hole saws and hole saws) as well as screwdriving and smoothing.

New safety handle with innovative fastening and softgrip for secure holding of the machine.
Sturdy metal gearbox for long working life.
Mechanical overload clutch Anti-rotation for high working security even for the toughest applications
Single-sleeve quick-change chuck with auto-lock for quick tool-changing using only one hand.
Rotatable brush plate for equal torque in clockwise and anti-clockwise directions.
Spindle neck ⌀ 43 mm (European standard) − can be used in drill stands.
2-speed gearbox.

Enhanced user protection by KickBack Control.

Supplied with 13 mm quick-change chuck, additional handle, depth stop 210 mm, L-BOXX 136.
Manufacturer's designation: GSB 24-2
Power consumption: 1,100 W
maximum torque: 40 N·m
Drill chuck adapter: 1/2 inch − 20 UNF
maximum speed 1st speed: 900 min-1
maximum speed 2nd speed: 3,000 min-1
maximum twist drill size ⌀ in steel: 16 mm
maximum twist drill size ⌀ in wood: 40 mm
maximum twist drill size ⌀ in concrete: 22 mm
maximum hammer rate: 15,300 min-1
Quick-clamping chuck range: 1.5 mm - 13 mm
Weight: 2.9 kg
maximum vibration to EN: 14.6 m/s2

Technical characteristics
Radius of curvature (middle tube): 45; 50; 65; 100; 130; 150; 200mm
Maximum thickness: 5.5 mm
Max bending angle: 90 degree
For nominal pipe sizes: 3/8 – 2 inch

Heavy-duty hydraulic tube bender with closed hydraulic system and return spring for better piston control. Cast iron pads and shapes, powerful piston delivering a pressure of 450 bars. High quality piston seals prevent leakage and increase service life. Skates with bending angle indication. Safe bending of tubes thanks to closed flange. The special design of the lever ensures protection against overloads. Delivery in a resealable wooden box.

Use:
For bending galvanized and black steel tubes as well as gas tubes (3/8 inch − 2 inch). Max. bending angle 90°, tubes max. 5.5 mm thick (2 inch tubes). Easy actuation thanks to the long piston stroke with each pump. Universal use in mechanical engineering, for work on pipeline systems, locksmithing, etc.

Content:
1 form of each: Ref. 3/8; 1/2; 3/4; 1; 1.1/4; 1.1/2; 2
Skate 2 pc.
Hydraulic tube bender: 1 pc.
Wheels: 3 pcs.

Bi-metal hole saw set with popular hole saw diameters. HSS variable tooth pitch for smooth cutting and long service life.
Impact-resistant plastic box with bi-metal hole saws, mounting shanks and centre drills.
Technical Data
Hole saw ⌀: 22; 30; 35; 44; 51; 68 mm
Number of pieces: 10
Number of mounting shafts: 2
Number of centre drills: 2

Equipment:
Quick-action clamping device, two inflatable clamping devices for attaching sockets, holder for knee joint adapter inserts, integrated measuring accessories, e.g. mm rulers, goniometers, height-adjustable footplate, TT and TF alignment pads. To be used for bench alignment of Ottobock modular lower limb prostheses (TF and TT) according to Ottobock alignment recommendations
Dimensions:
WxDxH 800 x 900 x 2,100 mm
31 1/2 x 35 3/8 x 82 5/8 inch
Scope of delivery:
Includes one right and one left adapter insert for Ottobock knee joints (adapter insert article numbers: 743Y579, 743Y580, 743Y581, 743Y582, 743Y583, 743Y584, 743Y608, 743Y629, 743Y681)

Entirely made of steel, unbreakable. Foldable form with self-closing coupling hooks

Casings and doors made of 0.9 mm sheet steel, shelving possible in 40 mm steps. Doors reinforced internally and lockable by a sliding handle with cylinder lock.
With hinged doors with viewing window (polycarbonate lenses).
Permissible shelf load / Maximum load per rack distributed over the surface (on the metal): 60 kg
Allowable load internal cabinet body: 500 kg
Door opening angle: 225 degree
Height: 2000 mm
Width: 1000 mm
Depth: 400mm
Useful height: 1,840 mm
Number of shelves: 4

Comfortable multi-material cross handle made of plastic. Chrome-vanadium steel blade, chrome-plated.
SET of : 6, 8, 10mm
Blade length: 350mm
Total length: 385mm

Comfortable multi-material cross handle made of plastic. Chrome-vanadium steel blade, chrome-plated.
Hexagonal: 8mm
Blade length: 350 mm
Total length: 382 mm

Comfortable multi-material cross handle made of plastic. Chrome-vanadium steel blade, chrome-plated.
Hexagonal: 6mm
Blade length: 350 mm
Total length: 382 mm

Comfortable multi-material cross handle made of plastic. Chrome-vanadium steel blade, chrome-plated.
Hexagonal: 10mm
Blade length: 350mm
Total length: 385mm

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Comfortable multi-component plastic T-handle. Blade made of chrome vanadium steel, chrome-plated.

Comfortable multi-component plastic T-handle. Blade made of chrome vanadium steel, chrome-plated.

Elbow body; optimized lengths. Maximum hardness while being particularly tenacious thanks to the special PB Swiss Tools alloy.
With ball head that can be used obliquely up to an inclination of 30 °. Chrome-plated surface on nickel.

Elbow body; optimized lengths. Maximum hardness while being particularly tenacious thanks to the special PB Swiss Tools alloy.
With ball head that can be used obliquely up to an inclination of 30 °. Chrome-plated surface on nickel.

Elbow body; optimized lengths. Maximum hardness while being particularly tenacious thanks to the special PB Swiss Tools alloy.
With ball head that can be used obliquely up to an inclination of 30 °. Chrome-plated surface on nickel.

Elbow body; optimized lengths. Maximum hardness while being particularly tenacious thanks to the special PB Swiss Tools alloy.
With ball head that can be used obliquely up to an inclination of 30 °. Chrome-plated surface on nickel.

Chrome vanadium steel, through hardened (toughened), surface manganese phosphated.
L-form shaft; ball point can be applied up to an angle of 30°.
Stored in: Plastic clip
1 each L-wrench: Size 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

L-form shaft; ball point can be applied up to an angle of 30°.
PB Swiss Tools special steel combining maximum hardness with exceptional toughness. Surface nickel-plated and chrome-plated, edges slightly chamfered.
Content:
1 each L-wrench: Size 1.5; 2; 2.5; 3; 4; 5; 6; 8
Presented in: Plastic clip

In plastic clip.
L-form shaft to DIN 911/DIN ISO 2936, chromium-vanadium steel, end faces squared and milled.
Content table use: 1 pc. each screwdriver Size 2; 2.5; 3; 4; 5; 6; 8

Handy holder in fiber-reinforced plastic with release button.
Contents:
1 spanner each: 2; 2.5; 3; 4; 5; 6; 8 mm

L-form shaft to DIN ISO 2936 L, end faces squared and chamfered. Chrome vanadium steel, through hardened (toughened).
Surface manganese phosphated.
1 each L-wrench No. 626125: Size 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10
Storage in: Plastic clip

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
With centre hole for socket head screws with a tamper-proof pin.
Application: For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Chrome vanadium special alloy, high strength.
Drive profile: Hexagon screwdriver with hole
Hexagon: 6 mm
overall length: 89 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
With centre hole for socket head screws with a tamper-proof pin.
Application: For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Chrome vanadium special alloy, high strength.
Drive profile: Hexagon screwdriver with hole
Hexagon: 5 mm
overall length: 89 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
With centre hole for socket head screws with a tamper-proof pin.
Application: For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Chrome vanadium special alloy, high strength.
Drive profile: Hexagon screwdriver with hole
Hexagon: 4 mm
overall length: 89 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
With centre hole for socket head screws with a tamper-proof pin.
Application: For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Chrome vanadium special alloy, high strength.
Drive profile: Hexagon screwdriver with hole
Hexagon: 3 mm
overall length: 89 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
With centre hole for socket head screws with a tamper-proof pin.
Application: For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Chrome vanadium special alloy, high strength.
Drive profile: Hexagon screwdriver with hole
Hexagon: 2 mm
overall length: 89 mm
Bit hexagon shank: E6.3