Swiss precision needle files satisfy the highest demands for accuracy of shape, precision cut, removal rate and tool life. Cut length = 1/2 file length. Manufactured from special steel for precision files with high wear resistance (65-66 HRC). Precisely determined shapes, special cut angle and large selection of different cuts. High metal removal rate.
Overall length: 160 mm
Diameter: 2.9 mm

Swiss precision needle files satisfy the highest demands for accuracy of shape, precision cut, removal rate and tool life. Cut length = 1/2 file length. Manufactured from special steel for precision files with high wear resistance (65-66 HRC). Precisely determined shapes, special cut angle and large selection of different cuts. High metal removal rate.
Overall length: 200 mm
Cross section: 6.5×2.0 mm

Swiss precision needle files satisfy the highest demands for accuracy of shape, precision cut, removal rate and tool life. Cut length = 1/2 file length. Manufactured from special steel for precision files with high wear resistance (65-66 HRC). Precisely determined shapes, special cut angle and large selection of different cuts. High metal removal rate.
Overall length: 200 mm
Cross section: 6.5×1.3 mm

Keyed files are manufactured on precision automatic machines. They guarantee high performance and a long service life.

also referenced under: OOMAMARP3000J, CRM 99

Strong pressed steel shanks with rotating wheel and lock. With 6 different hollow punches (⌀ 2.0; 2.5; 3.0; 3.5; 4.0 and 4.5 mm).
Use a soft material, e.g. leather, as an underlay to avoid damage when a lot of pressure is applied.

220V power supply. Dimensions: 45 x 40.5 x 16 cm
Based on the prince of light transmission for optical fiber, the assembly of the platform was developed by the equal and sees the image reflected on the interior mirror support. The quality of the bending and contact rendering allows you to obtain precise diagnoses. Very robust (15 mm thick acrylic glass), this podoscope also has a modern and elegant design

All technical data is based on an operating pressure of 6.3 bar and the indiqué inside pipe shown.
A range of powerful and very quiet revolver-type drills with a maximum drilling power of 13 mm in steel. Air exhaust through the handle prevents swirling of chips. With quick-release chuck.
Discharge power: 350W
Maximum rotation speed: 0 min-1 - 2400 min-1
Quick clamping chuck clamping range: 1.5mm - 10mm
Maximum quantity of absorbed air: 600 l / min
Threaded connection: BSP
Pneumatic connection: 1/4 inch
Recommended hose size (⌀ int.): 10 mm
Weight: 1 kg
Sound level: 82 dB (A)
Maximum vibrations according to EN: <2 m / s2
Length: 211 mm

For attachment to the Ottobock 743A11 casting apparatus. Provides functional casting of ischial containment sockets while bearing weight. Has pneumatic pressure adjustment and a short-stroke cylinder. Pressure regulator provides individual pressure adjustment of the femoral pad. The pneumatic unit of the SIT* cast casting apparatus can be directly connected to the compressed air supply system (connecting hose and service unit with pressure regulator are not included in the delivery).
Scope of Delivery:
ncludes 8 SIT-casting forms: 743Y50=L1, =R1, =L2, =R2, =L3, =R3, =L4, =R4

With clearance plate, line : 4 m, D 2mm

- Robust parcel scales for the dispatch department.
- Very simple operation with four buttons.
- Display unit with numeral height 25 mm can be placed away from the platform; can be positioned or mounted using the flexible cable approx. 2 m long.
- Suitable for mains and battery operation, auto-off after 3minutes.

Supplied with:
Mains adapter and wall bracket for display unit.
maximum weighing range: 0 kg - 150 kg
Scale divisions: 50 g
Number height display unit: 25 mm
Reproducibility: 50 g
Manufacturer's designation: EOB
Dimensions of weighing plate: 315×305 mm
Display unit width: 215 mm
Display unit depth: 110 mm
Display unit height: 50 mm
Net weight: 3.8 kg

For preparing models
For forming temporary dummies when there is no direct resin contact
Easily formable
Easy to apply, even on larger surfaces

made of premium steel, with round, curved and plastic-coated shank, flexible blades, polished

made of premium steel, with round, curved and plastic-coated shank, flexible blades, polished

Included:
Basic-unit Assistant-System
Foot-plate Assistant-System
Scoliosis-unit Assistant-System
Mirror-unit Assistant-System
Head strap with frame Assistant-System
Block and tackle Assistant-System
Seat- / stand-support (with fixing parts)

210mm

Using the plaster modelling aid, you can process plaster models quickly and efficiently. Continuous clamping and re-clamping of the plaster model is now a thing of the past.
Your production process is optimised.
The plaster modelling aid saves time and labour costs, facilitating everyday work routines.
Plaster models weighing up to 40 kg can be processed with the plaster modelling aid.
Dimensions WxDxH: 119 x 55 x 130 mm
Equipment: 4 attachments with diameters of 16 mm, 21 mm, 26 mm and 36 mm
Weight: 1.4 kg
Material: Stainless steel
To be used for: for plaster modelling without securing the plaster model with jaw clamps or ring clamps; for various tube diameters
Type of Planning and Equipment: Plaster Casting and Plaster Modification

diam. 125mm, 0.5l

Mixer for paints and coatings. Mixer with hexagon profile for clamping in a mandrel.
Up to 20 kg, 10 mm hexagon

Plastic bucket, sturdy model. With graduation and heavy metal handle.

Body of stainless steel drop forged. Wear-resistant spindle with plastic handle. Cutter wheel for steel pipes of stainless steel, accurately hardened for long tool life. Guide rollers of special steel; chrome-plated.
For clean and right-angled cutting off of pipes.
The external burr is rolled over automatically when cutting. The cut pipe end is immediately ready for thread cutting.
Cutter wheel: ⌀32 mm
Cutter wheel width: 19 mm
Cutter wheel bore: 9 mm
for pipe outer: ⌀1/8 − 2 inch
Number of guide rollers: 2
Number of cutter wheels: 1

Sturdy octagonal shank with cylindrical shaft. Uniformly through hardened over the entire length. Head specially annealed to prevent splintering. Actual ⌀ 0.05 - 0.5 mm less than nominal ⌀, prevents the pin punch jamming in the hole.
Standard quality of chrome vanadium air hardening steel, painted.
1 each pin punch: 2; 3; 4; 5; 6; 8 mm

With shock-proof plastic handle and round chrome-plated blade.
Material: Chrome vanadium steel.
Blade length: 80 mm
Blade ⌀: 5 mm
overall length: 155 mm

edding 400, round point, line thickness approx. 1 mm.
Application:
For marking on almost all materials, even metal, glass, plastic.
Manufacturer's designation: edding 400
maximum line thickness: 1 mm
Writing colour: black
quick-drying: yes
waterproof: yes
refillable: yes

Stand of sheet metal 40×40 mm for screwing to the worktop. Perforated sheet metal panel between the columns.
Colour:
RAL 7035 light grey powder coated.
Note:
Articles in the support column attachment range cannot be inserted into the perforated panel.
Technical Data
Material thickness: 1 mm
Hoffmann perforated panel grid interval: 9×9 mm
Height: 481 mm
Width: 1,420 mm
Depth: 25 mm
suitable for type: 1500

aluminium, to determine pelvic alignment

Micro-serrated. Snip jaws made of stainless steel (HRC 58 − 60), handles of sheet steel, nickel plated. 2-component handle with non-slip insert of soft material, easy on the hand.
Cutting capacity: Metal sheets up to 1.8 mm, stainless steel sheets up to 1.2 mm.
Application:
For curved and short straight cutting.

Strong, very long, and slim blades; fully nickel-plated. Made of stainless steel.
Paper, fabric, thin material, and much more.
overall length: 250 mm

Strong, very long, and slim blades; fully nickel-plated. Made of stainless steel.
Paper, fabric, thin material, and much more.
overall length: 200 mm

Robust blades. Made of stainless steel

Vice jaws of extruded aluminium With integrated permanent magnets, suitable for all vices of corresponding jaw width. Unique clamping force due to large magnet area.
Clamping faces smooth.
Suitable for: All vice models.
New version with 50% more gripping power.
Jaw width: 150mm
Type of fastening: Permanent magnet
Type of clamping face: smooth

Vice jaws of extruded aluminium With integrated permanent magnets, suitable for all vices of corresponding jaw width. Unique clamping force due to large magnet area.
Clamping faces smooth.
Suitable for: All vice models.
New version with 50% more gripping power.
Jaw width: 100 mm
Type of fastening: Permanent magnet
Type of clamping face: smooth

Jaws in extruded aluminum. With integrated permanent magnets, for all types of vices, with corresponding jaw width. Exceptional clamping force thanks to the large magnetic surface. Clamping surfaces with smooth fiber coating.
Suitable for:
All vice models.
Jaw width: 100mm

Equipment:
Quick-action clamping device, two inflatable clamping devices for attaching sockets, holder for knee joint adapter inserts, integrated measuring accessories, e.g. mm rulers, goniometers, height-adjustable footplate, TT and TF alignment pads. To be used for bench alignment of Ottobock modular lower limb prostheses (TF and TT) according to Ottobock alignment recommendations
Dimensions:
WxDxH 800 x 900 x 2,100 mm
31 1/2 x 35 3/8 x 82 5/8 inch
Scope of delivery:
Includes one right and one left adapter insert for Ottobock knee joints (adapter insert article numbers: 743Y579, 743Y580, 743Y581, 743Y582, 743Y583, 743Y584, 743Y608, 743Y629, 743Y681)

Classic screwdrivers set with wall mount
PH 0; PH 1; PH 2; PH 3
for Phillips screws
precise, true-to-size tips, optimal fit in the screw heads
slim handle, compact and for universal applications
high-quality materials used, impact-resistant and oil/gasoline resistant
special alloy based on spring steel, exceptional elasticity coupled with high grade hardening
laser-marked serial number, lifetime guarantee

Classic screwdriver set in a high-quality paperboard box

for slotted screws, universal applications
parallel tip, optimum transmisson of force, no cam-out
slim handle, compact and for universal applications
high-quality materials used, impact-resistant and oil/gasoline resistant
special alloy based on spring steel, exceptional elasticity coupled with high grade hardening
laser-marked serial number, lifetime guarantee