With hickory handle ergonomic shape, varnished.
Hammer head drop forged and ground to size. Carefully hardened and tempered. Head painted, face and peen bright finished.
With nylon handle protection sleeve. Size 200−1000 additionally with forged-on handle protection collar.

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Special grade for: Stainless steel

Sturdy design with long arms, made of tool steel. Points and measuring faces ground and hardened. Solid spindle with adjusting nut for quick and fine adjustment. Annular spring provides constant spring tension.
With replaceable tips.

Robust blades. Made of stainless steel

Solid polishing pastes in homogeneous blocks, easy cleaning after use

also referenced under: OOMAMARP3000K, CRM 100

Serrated jaws and powerful steel spring clamp body. Distance and clamping pressure adjustable via a knurled screw. Nickel plated pliers.
Oval jaw shape

Long style with wide chamfer; forged; ground bright finish. Each chisel is tested for hardness and edge holding properties.
Material: Top quality special steel with wooden handle.
overall length: 235 mm
Blade width: 10 mm

Ergonomic soft-grip handles of plastic. Blades of non-rusting stainless steel (52 - 54 HRC).
Paper, cardboard, fabric, leather, rubber, cord, and much more.
overall length: 200 mm

Narrow shape with profiled body in double T (chrome). 22 ° jaw position. Forged and hardened. With graduation on the jaws.
Maximum opening: 13mm
Total length: 100mm

Serrated jaws and sturdy spring steel body. Span and clamping pressure adjustable with a knurled screw. Fully nickel-plated.
Jaw shape double Vee.
For clamping profiled and flat materials. Clamping force up to 10,000 N.
Material: Jaws of chrome vanadium steel, drop forged.
Jaw capacity: 40 mm
overall length: 250 mm
Jaw length: 35 mm

Bow made of oval, varnished steel tube with clamping lever. Saw blade made of original Swedish steel. With hardened tooth tips. Precision ground and exactly set.
Rip-toothed (HZ) 4 teeth before the raker − always sharp. For all types of wood, particularly green wood.
Tooth profile: Rip-toothed
Blade length: 760 mm
Blade height: 18 mm

The blanks are precision forged, ground and have an exact cut of even density and depth. After most careful tempering while hardening, these quality wood rasps/ files achieve the best performance and tool life.
Norm: DIN 7263
Cross section: 25×7 mm
Length without tang: 250 mm

Long style with wide chamfer; forged; ground bright finish. Each chisel is tested for hardness and edge holding properties.
Material: Top quality special steel with wooden handle.
overall length: 215 mm
Blade width: 6 mm

Ceramic bonded combination oilstones, hardness O/ P. One side coarse for roughing, the other side fine for finishing.
Special Aluminium Oxide 180 grit (medium) with long working life. Other side precision abrasive, 500 grit (very fine), very free cutting, high surface quality.
Application:
For deburring, finish smoothing of irregularities, rounding of edges.

L-form shaft to DIN ISO 2936 L, end faces squared and chamfered. Chrome vanadium steel, through hardened (toughened).
Surface manganese phosphated.
1 each L-wrench No. 626125: Size 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10
Storage in: Plastic clip

Replacement wheel with needle bearing and quick-change axle.
Technical data
⌀ wheel 20 mm
Wheel width 6.2 mm
Roll bore 7.8 mm

With short strong jaws (flat). Serrated inside jaws.
Jaws chemically blacked, polished head, plastic coated handles.
Standard: DIN ISO 5745
Material: Special tool steel, drop-forged, and oil-hardened.
Type of jaws: inner face roughened
Jaw design: flat
Jaw length: 30 mm
overall length: 160 mm

With hickory handle ergonomic shape, varnished.
Hammer head drop forged and ground to size. Carefully hardened and tempered. Head painted, face and peen bright finished.
With nylon handle protection sleeve. Size 200−1000 additionally with forged-on handle protection collar.

Strong pressed steel shanks with rotating wheel and lock. With 6 different hollow punches (⌀ 2.0; 2.5; 3.0; 3.5; 4.0 and 4.5 mm).
Use a soft material, e.g. leather, as an underlay to avoid damage when a lot of pressure is applied.

Very long snipe nose jaws. Cutting edges induction hardened (approx. 61 HRC), suitable for hard and soft wire. Serrated inside jaws.
Pliers bright finished, plastic coated handles.
Standard: DIN ISO 5745
Material: Chrome vanadium steel, drop-forged and oil-hardened.
overall length: 200 mm
Jaw length: 73 mm
Jaw design: snipe-nosed, straight
Jaw characteristics: Cutting edges induction hardened (approx. 60 HRC)
Type of jaws: inner face roughened
Handle: plastic coated
Material: Chrome vanadium steel, drop-forged and oil hardened
Surface: bright finish

Sturdy design with chamfered arms, tool steel, forged and precision ground. Riveted through joint hinge. Hardened and ground points.

For preparing models
For forming temporary dummies when there is no direct resin contact
Easily formable
Easy to apply, even on larger surfaces

Made of stainless steel, with return spring.
Offset jaws, plastic coated handles.
Widely applicable. Ideal for thin sheet metal, plastics, leather, cardboard, paper, cord, fabrics etc.
overall length: 190 mm
Length cutter: 40 mm

With hickory handle ergonomic shape, varnished.
Hammer head drop forged and ground to size. Carefully hardened and tempered. Head painted, face and peen bright finished.
With nylon handle protection sleeve. Size 200−1000 additionally with forged-on handle protection collar.

Sturdy design with long arms, made of tool steel. Points and measuring faces ground and hardened. Solid spindle with adjusting nut for quick and fine adjustment. Annular spring provides constant spring tension.
With replaceable tips.

Swiss precision needle files satisfy the highest demands for accuracy of shape, precision cut, removal rate and tool life. Cut length = 1/2 file length. Manufactured from special steel for precision files with high wear resistance (65-66 HRC). Precisely determined shapes, special cut angle and large selection of different cuts. High metal removal rate.
Overall length: 200 mm
Cross section: 6.5×2.0 mm

Small and handy, good cutting performance.
With adjustable natural varnished wooden handle. Can be clamped at any point on the frame. Frame solid nickel-plated steel square bar.
Supplied with: Including general-purpose saw blade for metal, aluminium, wood and plastic. Blade length 150 mm.
Blade length: 150 mm
Overall length: 310 mm

4 stone drill Ø 5/6/7/8 mm
3 x screwdriver bits L = 25 mm PZ 2/2/2
75 x 3.5 x 30 screws: 25 pieces, 20 pieces 4.0 x 35, 20 pieces 4.0 x40, 10 pieces 5.0 x 50
90 plugs: 30 pieces ø 5 mm, 25 pieces ø 6 mm, 20 pieces ø 7 mm, 15 pieces ø 8 mm
Universal holder, magnetic.

Strong head, laid-on joint. Jaws chemically blacked, polished head, plastic coated handles. Cutting edges induction hardened (approx. 61 HRC).
Standard: DIN ISO 5748
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 180 mm
Cutting capacity soft wire up to ⌀4 mm
Cutting capacity hard wire up to ⌀2.5 mm

1335 x 13 x 0,65 mm, 6-10 teeth

Strengthened core taper.
With point geometry shape C.

Straight hexagonal shank with ball point.
Kraftform handle made of impact-resistant plastic with integral soft zones. Blade of high quality tool steel, surface matt chrome-plated, black tips.

Two-jaw ratchet tool holder for clamping drive squares. Sliding handle with groove at each end for locking the stop ball. Chromed carrier block. Reversible left / right or fixed ratchet. All-steel model for high dynamometric load. Tool holders with exact concentricity and tight tolerances. Milled and induction hardened clamping jaws for high toughness and optimum surface hardness.
Suitable for tapping in difficult places.
For other sizes of taps and reamers, see the tables for the corresponding product groups.
Material: All steel
□ capacity: 2.6 mm - 5.5 mm
For hand taps DIN 352: M3 - M10
Total length: 85 mm

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

With short strong jaws (round). Smooth jaws.
Jaws chemically blacked, polished head, plastic coated handles.
Standard: DIN ISO 5745
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 140 mm
Jaw length: 28 mm

With hickory handle ergonomic shape, varnished.
Hammer head drop forged and ground to size. Carefully hardened and tempered. Head painted, face and peen bright finished.
With nylon handle protection sleeve. Size 200−1000 additionally with forged-on handle protection collar.

Hacksaw frame with all-steel back. Alternative blade setting at 90° for flush cutting. Plastic handle. Overall length 520 mm.
The bow saw with its prominent bow frame is characterised by the u-shaped bow which tensions the saw blades. The limitation in depth of cut of hand bow saws is presented by the distance from the blade to the bow. This frame shape permits the use of particularly slim saw blades, which in other frame shapes would be liable to buckle when subjected to cutting movements with the force in alternate senses or other than in the pulling sense. Thanks to the thin hacksaw blades the metal cutting effort required is reduced, because of the small cutting width. Thus this type of saw is the classic standard for hacksaw work in metalworking.

Square drive: 3/8 in
Total length: 200mm

Strong, very long, and slim blades; fully nickel-plated. Made of stainless steel.
Paper, fabric, thin material, and much more.
overall length: 250 mm

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on all faces; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form D
Length without tang: 250 mm
Width: 10 mm

with nail puller and countersunk tip, painted black, with nail holder, with tubular steel handle and steel ring for better protection of the handle, with plastic handle

Strengthened core taper.
With point geometry shape C.

Comfortable multi-material cross handle made of plastic. Chrome-vanadium steel blade, chrome-plated.
Hexagonal: 10mm
Blade length: 350mm
Total length: 385mm