Sliding combination square, metric and imperial marking on ruler
Can mark 90° and 45°
Adjustable depth for repetition marking and scribing
Built in level bubble for approximate marking and a metal scriber contained in the end
Size: 300mm / 12"

for widening holes, shaping or planing concave surfaces, very ideal for turner work, yellow plastic handle, black hand rest (can be disassembled)

0 − 9, 6 mm

Forged steel; wide jaws with prism. Reinforced shank with secure hinge guide and enclosed special spring. Spindle with trapezoidal thread and strong butterfly nut.
overall length: 120 mm
Jaw width: 45 mm
Jaw capacity: 22 mm

With hardened jaws and steel handles. Possibility of removing a handle to allow use in confined spaces.
Reinforced model. All dimensions with high quality forged steel body and solid steel handles.
□ capacity: 3 mm - 9 mm
For hand taps DIN 352: M4 - M12
For ⌀ hand reamers DIN 206: 5 mm - 10 mm
Total length: 280 mm

Ergonomically shaped T-handle with easy-grip Haptoprene® surface and an impact-resistant plastic core. Blade of chrome vanadium special steel. Surface nickel-plated and chrome-plated. Size 4 − 10 with side drive.

Light alloy holder (120 mm long) with collet chuck and interchangeable detachable three-square hollow section blade of special tool steel or carbide. Blade can be taken out and reground along its entire length.

Special grade for: Stainless steel

D 25mm

D 22mm

Robust, knurled body with interchangeable hardened tip and ergonomic tip for high user comfort. The punching power can be adjusted at will by rotating the tip.
Material (s): Special tool steel.
Total length: 110 mm
⌀ tail: 10 mm
Min impact force: 47 N
Max impact force: 78 N
Material: Special tool steel

335mm

Considerable cutting performance with little effort. Serrated jaws. Cutting edges additionally induction hardened (approx. 63 HRC); also suitable for piano wire.
Jaws chemically blacked, polished head, plastic coated handles.
overall length: 225 mm
Cutting capacity hard wire up to ⌀3mm
Cutting capacity piano wire up to ⌀2.5 mm

Of special stainless clock spring steel with ground measuring edges. Wide version. Upper and lower edges both with mm graduations. Very easy to read due to matt surface and sharp graduation scale.
Graduations electrolytically etched. Matt non-reflective surface.

With long, slim jaws and flush fitting joint.
Pliers chrome-plated, plastic coated handles.
Standard: DIN ISO 5745
Material: Chrome vanadium steel, drop-forged and oil-hardened.
Jaw length: 42 mm
overall length: 140 mm

Sturdy octagonal shank with cylindrical shaft. Uniformly through hardened over the entire length. Head specially annealed to prevent splintering. Actual ⌀ 0.05 - 0.5 mm less than nominal ⌀, prevents the pin punch jamming in the hole.
Standard quality of chrome vanadium air hardening steel, painted.
1 each pin punch: 2; 3; 4; 5; 6; 8 mm

Narrow shape with profiled body in double T (chrome). 22 ° jaw position. Forged and hardened. With graduation on the jaws.
Maximum opening: 24mm
Total length: 200mm

Sturdy design with chamfered arms, tool steel, forged and precision ground. Riveted through joint hinge. Hardened and ground points.

Keyed files are manufactured on precision automatic machines. They guarantee high performance and a long service life.

The blanks are precision forged, ground and have an exact cut of even density and depth. After most careful tempering while hardening, these quality wood rasps/ files achieve the best performance and tool life.
Norm: DIN 7263
Cross section: 29×9 mm
Length without tang: 300 mm

Outer diameter: 200mm
Width: 30mm
Bore: 32mm
Abrasive material: normal corundum
Grain size: 36

Outer diameter: 200mm
Width: 30mm
Bore: 32mm
Abrasive material: normal corundum
Grain size: 36

Octagonal shank, bright finished head. Head specially annealed to prevent splintering.
Chrome vanadium air hardened steel, painted surface.
1 each rivet snap setter: Size 2; 3; 4; 5; 6

Heavy-duty head with additionally induction hardened cutting edges (approx. 64 HRC). Laid-on joint. High cutting performance due to optimum leverage.
Jaws bright finished, plastic coated handles.
For all types of wire (long working life even with hard wire). Heavy duty for the most demanding applications.
Standard: DIN ISO 5749
Material: Chrome vanadium steel, drop-forged and oil-hardened.
Cutting capacity piano wire up to ⌀2,5 mm
Cutting capacity soft wire up to ⌀4,2mm
overall length: 200 mm
Cutting capacity hard wire up to ⌀3 mm

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
With centre hole for socket head screws with a tamper-proof pin.
Application: For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Chrome vanadium special alloy, high strength.
Drive profile: Hexagon screwdriver with hole
Hexagon: 6 mm
overall length: 89 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
With centre hole for socket head screws with a tamper-proof pin.
Application: For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Chrome vanadium special alloy, high strength.
Drive profile: Hexagon screwdriver with hole
Hexagon: 5 mm
overall length: 89 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
With centre hole for socket head screws with a tamper-proof pin.
Application: For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Chrome vanadium special alloy, high strength.
Drive profile: Hexagon screwdriver with hole
Hexagon: 4 mm
overall length: 89 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
With centre hole for socket head screws with a tamper-proof pin.
Application: For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Chrome vanadium special alloy, high strength.
Drive profile: Hexagon screwdriver with hole
Hexagon: 3 mm
overall length: 89 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
With centre hole for socket head screws with a tamper-proof pin.
Application: For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Chrome vanadium special alloy, high strength.
Drive profile: Hexagon screwdriver with hole
Hexagon: 2 mm
overall length: 89 mm
Bit hexagon shank: E6.3

Heavy-duty head with additionally induction hardened cutting edges (approx. 64 HRC). Laid-on joint. High cutting performance due to optimum leverage.
Jaws bright finished, plastic coated handles.
For all types of wire (long working life even with hard wire). Heavy duty for the most demanding applications.
Standard: DIN ISO 5749
Material: Chrome vanadium steel, drop-forged and oil-hardened.
Cutting capacity piano wire up to ⌀2 mm
Cutting capacity soft wire up to ⌀3.4 mm
overall length: 160 mm
Cutting capacity hard wire up to ⌀2.5 mm

Soft ergonomic plastic handles. Special stainless steel blades (52 - 54 HRC).
Paper, cardboard, fabric, leather, rubber, rope, etc.
Total length: 250 mm

Ergonomic soft-grip handles of plastic. Blades of non-rusting stainless steel (52 - 54 HRC).
Paper, cardboard, fabric, leather, rubber, rope, etc.
Total length: 225 mm

Sturdy metal central piece with handle of hickory, with nylon handle protection sleeve and ring wedge. The nylon inserts are impact resistant and wear-resistant, and are attached to the central piece by a double action system.
Central piece of steel.

All faces and edges ground. Inspection test faces ground.
Application:
For accurate general workshop work.
Accuracy:
DIN 875 / 2 − angle tolerance e.g. for size 100×70 = 0.030mm.

Handy holder in fiber-reinforced plastic with release button.
Contents:
1 spanner each: 2; 2.5; 3; 4; 5; 6; 8 mm

Strong head, laid-on joint. Jaws chemically blacked, polished head, plastic coated handles. Cutting edges induction hardened (approx. 61 HRC).
Standard: DIN ISO 5748
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 200 mm
Cutting capacity soft wire up to ⌀4 mm
Cutting capacity hard wire up to ⌀2.8 mm

Ergonomically shaped T-handle with easy-grip Santoprene® surface and an impact resistant plastic core. Blade of chrome vanadium special steel. Surface chrome-plated.
Impact resistant plastic T-handle. Blade of special vanadium steel, surface matt chrome-plated.

Narrow shape with profiled body in double T (chrome). 22 ° jaw position. Forged and hardened. With graduation on the jaws.
Maximum opening: 19mm
Total length: 150mm

Special grade for: Stainless steel

Special grade for: Stainless steel

Ceramic bonded combination oilstones, hardness O/ P. One side coarse for roughing, the other side fine for finishing.
Special Aluminium Oxide 100 grit (coarse) with long working life. Other side precision abrasive, 280/320 grit (fine), very free cutting, high surface quality.
Application:
For deburring, finish smoothing of irregularities, rounding of edges.

Optimized for material: Wood
Panel thickness (soft wood): 3-65 mm

also referenced under: EMACSAWSJ6B2

Long style with wide chamfer; forged; ground bright finish. Each chisel is tested for hardness and edge holding properties.
Material: Top quality special steel with wooden handle.
overall length: 250 mm
Blade width: 16 mm